Jump to content

Recommended Posts

Posted

 I am new to the forums and hoping someone may have seen this or run into this before. I own a 2012 Silverado LTZ Crew Cab, 5.3L, 2WD, 102K miles, Factory radio with a harness plug for a an amp for subs. Electric drop down side steps. LED headlights & fogs. K&N Nighthawk Intake. Battery is less than a year old but i'm in Arizona so batteries get wrecked yearly.

 

 I recently took my truck to my local DIY car wash place where I always go. I washed my truck like normal and dried it off like normal. I did not spray engine bay, just the front grill area inward but not heavy. I don't usually use my AC but I'm in Arizona and it was about 109* outside. When I was leaving the car wash I kicked my AC on so I wouldn't mess up the clean windows from rolling them down. I proceeded to leave and as I was coming to the stop sign before making my turn and my truck's idle started to drop, truck kinda sputtered, the battery voltage dropped, the stabilitrak light, traction light, ABS light, all kicked on. The radio shutoff and turned back on. The AC shut off and turned back on, but switched from recirc to fresh. I turned the AC off and then back on again and continued to drive home. It did it a few more times so I swung into the gas station to park and see if it would do it while i was sitting there. Nothing. So back on the road again, turned my AC on and hit the next light, and it did it again.

 

I changed my oil today (6/13), I cleaned my K&N air filter last weekend. I took a trip to Lowes this morning to see if it was still doing it, and sure enough it was. The photos are attached of it doing it in the lowes parking lot before I left. I rolled the windows down, turned the AC off and cruised home. It didnt do it again. So I am thinking the AC is drawing a huge amount of power from the system when I run it, or my battery is done for. Any helpful feedback would be appreciated. 

 

Screenshot_20200613-155350_Video Player.jpg

Screenshot_20200613-155341_Video Player.jpg

Screenshot_20200613-155333_Video Player.jpg

Posted

Also I put on my Kobra OBDII scanner and ran two apps with zero results. No code firing and I was able to duplicate the same result. I will start with having the battery replaced first and see what happens after that. My battery did drop to damn near 5 just driving around my neighborhood, speeding up and slowing down to a complete stop.

Posted

So i am having this issue with my 2017 silverado and the dealership has tried multiple things. They won't listen to me about what is really is. Check out G218 electrical issues on youtube and google.. You sound in the same boat as me. 

 

goooodluck.

Posted

2 suggestions.

1) ac off, fan on. Do the symptoms come back? If yes, then water got in the air intake to the blower motor. If not

2) compressor clutch coil circuit probably shorted out. Probably was a tiny, low amperage short but the introduction of water might have allowed plasma arcing and this increasing the dinosaur
Amperage flow. Pull the fuse, relay for the clutch and see if the symptom remains

  • 3 months later...
Posted

I am posting an update. I did a battery exchange at the auto parts store shortly after posting about the issue and it seemed to resolve my issue. Fast forward to 3 weeks ago the issue restarted. 

 

 Took the truck into the auto shop. They said faulty alternator, so 800$ later got a new AC Delco alternator on, next day, issue fired back up into full effect. Contacted Auto Shop, they re-diagnosed it for over a week. Found a faulty ground cable from the alternator to god knows what, 120$ fix, 40 minute test drive by auto shop, no issues. I had it home for 4 days now, took it out for lunch to meet a co-worker, issue fired back up the second I pulled into the driveway. This truly seems to happen when I am slowing down, applying the brake and coming to a stop. Sitting in park, or driving, zero lights going haywire. Its so intermittent that the auto shop couldnt get it to do it after the cable swap. 

 

 More research seems to point to spark plug wires, spark plugs, battery cables (Both Pos & Neg), ABS Sensors, or the last and most that seems to be the possible culprit is the brake light switch mounted to the brake pedal assembly. Few folks found this to resolve the issue I have but non mention the voltage drop. I have added two videos to show what I mean. 

 

https://youtu.be/j8jABs3loCY

 

https://youtu.be/YMK-LF4VtoY

 

 I am going to revert my truck back to standard headlight bulbs, fogs, and put the factory 3rd brake light back on just to eliminate the aftermarket lights from the equation.

 

 

  • 4 years later...
Posted

Did you ever figure out a solution to this problem I have a 2012 Silverado doing the same thing took it GMC for them to say my BCM is bad 1400 dollars later and it’s doing it again. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Here's the second UOA on my 22 Wrangler with the Ecodiesel. This has 5k miles on AMSOIL Signature Series DEO 5w-40. The first one was dealer installed oil, no clue what it was, the second is what AMSOIL recommended, European FS 5w-40, Most of the Ecodiesel world is showing great results using the European MS 5w-40, I figured I would see how the DEO works. This is using an Ecoguard oil filter. It's my understanding this engine likes to shed aluminum.  We will see. So far I don't think this is too bad.    
    • I'm surprised nobody seems to offer a solution like the start/stop device I put in my new truck. Remembers my setting when shutdown. And while it still starts up in start/stop, it stores/evaluates what mode it was in when shut down and will change it whithin a second or 2 of startup. It'd be nice to have something like that for the DRLs.
    • 2015 Sierra 1500 here. Leaks from the sunroof to front driver side and soaks carpet. How do I fix this? Thanks!
    • I will be doing that for sure, but I need to solve who has/ where I can find a bidirectional scan tool that will support OBD 1.5. I'm kicking myself because I ebay'ed a Snap On MT2500 that I didn't think I'd ever need anymore. D'oh!! I'd rather not buy another, so I'll contact a few local shops to see if they have one and how much they'd want to do the procedure. I'd rather have the ability to do it myself... I wish there was a modern tool that could do it all, but I'd have no idea what to buy.   The theory with the pulled timing is that it mimics a rich condition. The delayed spark causes incomplete burn and the O2 sensor picks up low oxygen levels. That's interpreted as a rich condition so the PCM pulls fuel and that shows up in the deeply negative fuel trims.
    • An ultra wealthy man had the most beautiful daughter. But, there was a problem. Everything she touched would melt in her hands. No matter what, Metal, Wood, Stone. Anything she touched would melt. She could not feed herself. Because of this, men were afraid of her. Nobody would dare marry her. Her father was despaired. What could he do to help his daughter? He consulted doctors, scientists and anybody who could solve this problem. Finally one of them said, "If your daughter touches one thing that does not melt in her hands, she will be cured." He was overjoyed and came up with a plan. The next day, he held a competition. Any man who could bring his daughter an object that would not melt in her hands would be given billions of dollars to marry her. Three extremely intelligent and handsome young men took up the challenge. The first brought a very heavy steel rod, But alas, when the she touched it, it completely melted in a matter of seconds. He sadly went away. The second brought a beautiful diamond, knowing diamonds were one of the hardest substance in the world and would not melt. But alas, once she held it in her hand, it melted. He too was sent away disappointed. So now, there was one left He was very nervous & sweating. He approached the daughter & said, “put your hand in my pants pocket and feel what is in there." She did exactly what he asked. She felt something very hard. She held it in her hand, squeezing it as hard as she could. It did not melt & remained extremely hard. Her father was overjoyed. Everybody was overjoyed. She was finally cured. Nothing never, ever melted in her hand again. They married and they both lived happily ever after, raising a wonderful family. Question: What was in the the groom’s pants pocket??? Answer below ↓ M&Ms of course! They melt in your mouth, not in your hand. What on earth were you thinking?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...