Jump to content

Push Rod bent?

Sergskate

By Sergskate
in Troubleshooting & Recalls

 Share

Recommended Posts

Sergskate New Member

Sergskate

Posted
Posted

2015 chevy silverado 1500 LT

5.3, 6 speed. 

Leveled 2.5 on 305s 

97k miles

Recently started to get a lifter tick noise, took it upon myself to pop the valve covers off and see if any rocker arms have any play(none have any play). Fried it up with valve covers off all valvetrain works and looks really good. Truck runs great, no check engine light, no misfires, idles amazing. My only idea now is to pull the rocker arms from the passenger side and inspect the push rods. That's the side I'm hearing the tick. Gonna buy a couple just to have in case I'm right. Any insight or should I just keep driving till I get a check engine light? Lol 

CamGTP Senior Enthusiast

CamGTP

Posted
Posted

Plausible it's a push rod noise but the more common thing is just the lifter being noisy. I haven't owned a GM LS/LT engine that doesn't have some sort of minor lifter tick noise. And pair that with the really loud direct injectors, these engine always make noise.

Jaychevy81 Enthusiast

Jaychevy81

Posted
Posted

Check your vacuum pump the 15's and 16's had faulty vacuum pumps which sounds just like a lifter or rod tick. May not be the case but you tube it. These motors aren't quiet on good day though lol.

Sent from my SM-G986U using Tapatalk

Sergskate New Member

Sergskate

Posted
  • Author
Posted

Thanks guys, yea I replaced my vaccum pump with the new updated one, I was wanting to delete it but I'm to lazy to go that hardcore on this truck, I added a extra quart of oil yesterday just to try, and oddly is running alot more quiet. This is my first winter in reno so maybe just needed extra? Lol I'm just gonna keep running it. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • mandrautomotive
      Light Up the Trail From Above: 50" PRO for the Hummer EV

      By mandrautomotive · Posted

      Hey everyone,   For anyone looking at roof-mounted lighting for the Hummer EV, we wanted to share our M&R Automotive 50" PRO Roof Light Bar for the 2022+ GMC Hummer EV.   The curved 50" bar sits close to the windshield rather than sticking way up above the roofline. The mounting position is designed to keep the setup relatively streamlined while minimizing wind noise and maintaining full use of the factory windshield wipers.   A few details:   50" curved PRO light bar Fits 2022–2026 GMC Hummer EV Spot + driving beam pattern TIR optics White main beam Amber DRL backglow Approximately 15,410 measured lumens through the lens Mounts to factory accessory locations No cutting or drilling required Wiring runs down the A-pillar toward the AUX connections Designed to minimize wind noise Lifetime warranty Off-road use only     The 50" is an interesting middle ground for anyone who wants the visibility and mounting position of a roof bar without stepping all the way up to the larger 60" setup. For the Hummer EV owners here, would you go with the 50" for the lower-profile look or step up to the full 60"?  
    • Glava2876
      What did you do to your "other" car (aka musclecar) today

      By Glava2876 · Posted

      My son got a hatchback withe the aero package for like 17k new. Great little car with amazing MPH
    • Jsdirt
      What did you do to your "other" car (aka musclecar) today

      By Jsdirt · Posted

      Yeah, I've given up years ago with that! I was able to load a few when I first joined the site sometime around '07. Then after maybe 20 pics, it said I exceeded the limit. Now every pic I try to post says I've "exceeded 1mb".   ONE MB??? That's Windows 95 ******, lol!! 
    • KARNUT
      What did you do to your "other" car (aka musclecar) today

      By KARNUT · Posted

      I get the same results with pictures. Then I figure it out. Then I forget. Screw it.
    • Jsdirt
      What did you do to your "other" car (aka musclecar) today

      By Jsdirt · Posted

      I guess I'm the only one on this forum who can't get effing pics to load here! Do you have to resize them to post, or am I just blocked from uploads?   I have the same luck with automotive electronics ... but this is the ONLY site on the net that I have this problem!   I'd post pics of what I'm working on ... but I CAN'T! 🤬       Just fabbed up the kickdown cable (had to extend the cable mount WAAAY out from the throttle shaft to get a full pull), and parts arrived for the fuel lines on the 940 carb conversion project. Should be able to drive this thing by the end of the day. If not for work, I'd have had this thing done SIX weeks ago.   Got the jetting sorted out last week. Had a real bad tip-in bog that I couldn't seem to correct. Friggin float height was over 11mm too HIGH! eBay purchase, so no wonder everything is screwed up right out of the box! I ended up with a larger dual-squirt accelerator pump jet anyway instead of the single. Also moved the 70 primary idle jet (4 sizes too big out of the box) to the secondary idle circuit, and installed a 57 in the primary. Runs great on the fuel bottle!    Still using the computer for ignition. Going to drive it first and see if I want to go through the project of installing an intermediate shaft with a distributor drive gear, so I can install a block-mounted distributor and run points, 100% computer free. I should do that anyway just from a simplicity / reliability / tunability standpoint. The electronics left me stranded last year a couple times! I can't tweak the timing to my liking right now because of the computer. Tried twisting the cam-driven distributor already ... and the damned thing just reverts back to where it was! That's infuriating. But if it runs well enough I might save that for next season.   Just driving it in and out of the shop to work on other projects, it feels 1,000% more responsive with the carburetor. Also fires MUCH faster when cranking. Can't wait to drive it and see if I got more than 114 ponies, lolol.   Hopefully these don't go 404 like the last post ... https://postimg.cc/gallery/MjhrmZS   Seems like that site went back to dial-up internet! Maybe they'll fix that some day ...

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...