Jump to content

Recommended Posts

Posted

I have a 2021 trail boss with 300 miles AND EVERY TIME I TURN OFF TRUCK THE EQ GOES BACK TO 0 its so annoying has anybody found a fix ?

Posted

I hate that you have to always turn the radio back on too after turning truck off. When you remote start the truck it always blows cold air full blast! have had my truck only days and really regret getting it now.

Posted

Yea, the reset worked for me too.  I did both the audio and truck settings (yea, had to reconfigure door locks, windows, etc.) just for grins.  Figure GM flashes a custom set of Infotainment/audio settings at the factory but probably from a different firmware image or something.  I went from a 25 year old truck to this 2021, so despite being in IT, I'm still learning that my new truck is actually a computer that happens to have an engine.  😉
 

Posted

Guys, can you talk more about the reset? What did you do and how long now has it kept the EQ settings?

Posted

So same issue with my 2021 Silverado 2500HD LT

2 weeks old and it would not save the settings, radio wouldn't come on when truck was started.

Did the complete reset this morning.

As for now the settings I set this morning have worked all day and the radio is on when I start the truck.

Go to settings and reset system, I had 2 options ( don't recall what they said) but I reset both.

Had to enter phone info etc and reprogram the favorite stations but it's worth it as long as it is solved.

Will report back if it fails.

Thanks for the info about reset.

 

 

Posted

These are the steps I followed to reset the radio in my truck:

1) Browse the radio menu's to Settings > System > Return to Factory Settings

2) Select Reset Vehicle Settings

3) Wait to reset

4) Select Erase Settings and Personal Data

5) Profit

 

I reset my radio on 4/16/21 and I haven't had a problem since.

  • Thanks 1
Posted
1 hour ago, Random said:

These are the steps I followed to reset the radio in my truck:

1) Browse the radio menu's to Settings > System > Return to Factory Settings

2) Select Reset Vehicle Settings

3) Wait to reset

4) Select Erase Settings and Personal Data

5) Profit

 

I reset my radio on 4/16/21 and I haven't had a problem since.

Thank You Random

Exactly what I did

Posted

2021 Silverado RST having the exact issue. I just purchased the truck a week ago. I found this topic searching the issue. Thanks for the reset option. I will try it today.

Posted
3 hours ago, David Jankowiak said:

I’m having the same issues in my 2021 Silverado LT. the equalizer resets to zero, and the volume goes way loud when starting the truck. This is highly annoying!  

Do a system reset in settings, it worked for me and a few others on here.

Posted
On 3/16/2021 at 10:00 PM, SSCHUU said:

Most every time I start up my truck I have to reset my Equalizer settings. It goes back to the default settings. 0 across the board. Does anyone else have this problem?

IMG_9097.thumb.JPG.52072bfe2a1a23040948381803d2ae39.JPG

I’m having same problem with my 2021 rst Silverado 

Posted
2 hours ago, Shoune28 said:

I’m having same problem with my 2021 rst Silverado 

Go into settings and scroll till you see Reset I don't recall exactly where but its there.

There will be 2 options , I did the reset for both.

You then have to program the radio again, phone stations etc..

Mine has been fine since I did it 2 weeks ago.

Good luck

 

Posted

I am new here, but I created an account because I was having the same Equalizer issues, where it would reset to all 0s once the vehicle turned off. I have a 2021 GMC Sierra, and the way that I got it to stop doing that was to go into the vehicle settings and tap the audio tab. from there you can set the equalizer setting to what you want. It was stopped resetting since. 

Posted
On 3/21/2021 at 2:46 PM, Trail Boss 2021 said:

I have the same issue. Seems very strange that you need to reset every time you start up.

I hope there is just a glitch..........

I have the same problem. Pain in the ass.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • This is NOT impact damage nor neglect. There were previous class action lawsuits because of such paint preparation st GM manufacturing plant. Not just the Cherry Red Color. This paint is applied in three processes to obtain the desired color.  The manufacturer will cover for 36 months or 36k miles only. That rust is actually corrosion because of the paint process failure. Corrosion is covered for 100,100 miles or a certain months. However their corrosion doesn't include this type. Go figure. Clearly manufacturer knew from previous paint issues. This started 3 weeks ago out of the blue.  
    • Is it time to put a piece of tape over the CEL? 
    • consider doing electrical testing?  I would guess some power or ground wire/connection has a problem.   alldata.com has wiring diagrams, connector pinouts and diagnostic procedures you can use to find where the problem is.
    • can you tell if the reader is actually trying to get codes, and the pcm is reporting none, or is your reader just silently failing because it's not communicating with the pcm?
    • Any joy with this truck seems to be short-lived.   The CEL for P0172 ("bank 1" too rich) is now "intermittent".   I'm not sure where to check, or re-check, and my energy to keep chasing problems with junk is wearing thin. The P0172 seems to set as I'm coming to a stop, completely off the throttle, when fully warm. At least, that's what it's done the 3? times it's set.   Everything appears normal on the scanner EXCEPT long term fuel trim. There's only one bank on this vehicle because it's an OBD 1.5 with only one upstream O2 sensor. At idle, it's around -16.4% and will dip to -18% occasionally at idle or off-throttle. LTFT approaches 0 when throttle is held at 2500rpm. Short term appears normal, much closer to zero all the time. The LTFT tells me the engine is running rich at idle but compensating at higher load. But, why?   The EVAP purge valve doesn't appear to be leaking/sucking fuel vapor continuously. Is it sticking just as I come to a stop and the engine is choking on fuel vapor and sets the P0172? But that doesn't explain the persistently negative LTFT. Disconnecting the purge valve doesn't seem to make any difference.   I suppose that leaves another dang issue with the fuel injector. A leaking fuel pressure regulator, a new leak in the spider, or a leaking fuel injector/poppet valve I didn't see, or a small crack in one of the spider legs.   The vacuum line leading to the fuel pressure regulator doesn't have raw fuel in it. It doesn't even smell like fuel when it's pulled off, not until you suck air through it, then you can tell it leads to a fuel component. I'd consider that normal? Nothing is signaling this is a FPR issue from the outside, at least.   The oil smells like fuel but it's not building volume. I've noticed most oil in most engines smells like fuel to some degree so it's hard to say if the smell is an issue or not. Or if the engine just still smells like fuel because the crankcase was full of it a few hundred miles ago. But it's been changed twice since that original issue of the leaking fuel line dumping fuel into the intake.   Patience is running very thin. Every win seems to be accompanied by two steps backwards, or another issue that leads to removing at least the top half of the intake manifold. Enough! LOL
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...