Jump to content

Parts for 2014-2018 Sierra or Silverado1 For Sale!!!!!!!

Csjumper2003

By Csjumper2003
in Classifieds (Buy/Sell/Trade)

 Share

Recommended Posts

Csjumper2003 Enthusiast

Csjumper2003

Posted
Posted (edited)

Just traded in my 2015 Sierra.  I have a few goodies that am looking to sell

 

I also have some Wet Okole Real Tree Camo seat covers that are in great shape.  They are for the crew cab with the middle seat in the front.  Im told they will also work on the console models but dont hold me to that. $280

593345547_WetOkoleSet.jpg.4b9285bf27af7338ef9456d7af1ab854.jpg

 

Pulled Out the Mids and Highs as well

These Are Hertz HCX 6x9s and 6.5s for the doors

$220 for the 6x9s regularly $599

9CA0B4BE-C167-4613-BFFD-CF27762BC801.jpeg.51a8dd15574e63da1af137c1f5d052b4.jpeg
E9A62FF3-FACF-4EA8-B406-BB099B2029FE.jpeg.9cec2d2fea42b03f83c15480c53003bd.jpeg

$180  for the 6.5" regularly $399 

IMG-5364.jpg.a930ecb2f79ad8dca6cab3ba7b454b1d.jpgIMG-5365.jpg.3abf3f24e8ad6933521c83c3003c9bbc.jpg

Pulled out the 2 12' Kicker Comp R DVC 2ohm subs

 

 

Brand New Bushwacker Fender Flares .  The set is still in the plastic.  I had to take them out of the box to transport them home.  ALL seals, and bolts and everything they come with still brand new

$275 comes with everything

1900913300_BrandNewBushwackers.jpg.25495d8acb8d86c77dd61c4dafda0281.jpg1394890826_BushwackerPackage.jpg.965bd3ef57c7f4239c3d068844ccf500.jpg133480371_bushwackerpackage2.jpg.b19030377bbca5da8fb641ad3c91b98f.jpg

Front valence under front bumper.  If local you it’s free.  Hit me up


AFE Power Aid Throttle body spacer

This is mode 200-543 

Never got to install.  
asking 80

D9D4DCE9-FD24-4A91-A8D2-AF34BB32D9C7.jpeg
OEM under dash lighting 

these are the oem lights for under the front dash.  Never did install

asking 35

141531086_footwelllights.jpg.4319a819cbe2348cf0d32f84a013d9ec.jpg
Rockford Fosgate Punch 400.4 Amp

amp is in excellent shape.  Any questions ask 

asking 240

28045648_RF4channelAMP.jpg.33530463f1bd24fbd307fcefbb946d24.jpg774694982_RF4channelAMP2.thumb.jpg.c8af0ab42cc56cb433090946dcb8d7fa.jpg

Still Adding pictures so message me if interested, or want more pics or some pics of things that arent uploaded yet

 

If you have any questions feel free to ask

 

 

Edited by Csjumper2003
Csjumper2003 Enthusiast

Csjumper2003

Posted
  • Author
Posted (edited)

So no.  That was an older one in the picture.  These things sound great.  
 

 

for the weather techs are you local in San Diego? 

Edited by Csjumper2003
Csjumper2003 Enthusiast

Csjumper2003

Posted
  • Author
Posted

Wow.   Is this how people are treated on here?   
 

I rushed to get the tuner out to him, and for got the cable.  Offered to send him a cable.  He said he was ordered one on Amazon.  
 

The license I didn’t know but instead of contacting me to make right you say buyer beware?  For real?  
 

calling me so I can figure the issue with Diablo may of been a way to keep you from spending 40 dollars.  The tuner isn’t married so there is no license being used.  If you haven’t paid it already I will call Diablo.  There is no reason to say buyer beware.  I hooked you up with a brand new tuner.  

Csjumper2003 Enthusiast

Csjumper2003

Posted
  • Author
Posted

To clear this up.  The license was not what he purchased.  He had to unlock his pcm.  Which Diablo charged him 40 dollars for. Not the tuner or anything to do with the tuner. 

  • Like 1
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Well....I've done my first intake gasket. Probably wrong, but...we'll see?   Ultra black on the china walls and 1/4" up onto the sides of the intake gaskets. Permatex High Tack (couldn't find Gaskachinch) on the head side of the intake gasket. I read wrong and it says you're supposed to put it on the mating surface of the head, not the gasket. Hoping it's like a PB&J sandwich where it doesn't matter what side the PB goes on so long as there's jelly. That crap is messy/sticky and I got a dab or two on the intake port openings, tried to wipe it off. Hopefully it won't be a big deal and will only aid in sealing.   Per instructions I left the intake (top side) of the gasket dry except for a light smear of RTV around the coolant ports. Wiggling the intake in there was a bear but I had help to free me of surrounding wiring/stuff but I was basically able to set it straight down lined up with the bolt holes.   I did not think to wait until the RTV skinned over but there probably was 5-10 minutes while it sat before installing the intake.   Bolts finger tight first. Then, followed the Chilton's manual pattern to snug them to 15 lb-ft.   Waited a little over an hour, and then did the final torque in sequence again to 35 lb-ft.   Yesterday I replaced the fuel pressure regulator and got my new "nut and bolt kit" (fuel lines) installed. Damn GM used security torx on the spider, which I don't have, so I got scammed at the local HW store for an off-brand security Torx bit set.   The new driver's door mirror arrived yesterday, so, there's a chance this thing could be running and road legal tomorrow? I don't want to get my hopes up.   This will be my first time stabbing a distributor, too. Although, lucky me, someone else marked the old distributor for removal previously, I did see that. (Someone's been here before!!). Engine is still at TDC so it *should* be just a matter of transferring the mark to the new dizzy and rotating it into place.
    • KARNUT
      2027 GMC Sierra: Official Discussion

      By KARNUT · Posted

      He has his dad’s newer truck he’s put away. He has several old cars he rotates between him and his family. I’ve seen a restored square body and a SS Chevy truck he’s sometimes drives. He did raffle off a new suburban recently. As much as he is watched if he drove new stuff as a rule we’d know it. It would be fine by me. I don’t care what people prefer. I got one more new one in me. I’d rather my wife get one. I can’t get her out of the Genesis. Don’t tell anyone. I want her to get an electric truck. I want to put a generator in the back. Just because. She hasn’t bit yet.
    • Atlas
      2027 GMC Sierra: Official Discussion

      By Atlas · Posted

      Yes, you must have seen my thread on the Blazer. HOT GARBAGE, but I love them anyway. I'm convinced every car guy has a soft sport for an S/T series somewheres. Probably even a Panther too, if I'm being an honest car guy. That doesn't mean they aren't junk. And they definitely don't get better with age. I sometimes play with old cars, but that's by choice. I don't rely on them and they aren't my everyday fleet.   Derek plays the common man on Youtube and that's no doubt where he started. Now he has Youtube money (and Motortrend, etc). You think his crews and his wife ride around in old beaters when they're chasing him and his wrecks across the country? No he's got newer and nicer stuff for that, you'll see glimpses of it in the footage.
    • Atlas
      2027 GMC Sierra: Official Discussion

      By Atlas · Posted

      You refuse to own anything made in this century yet you reportedly own... a 2007 Silverado, which is now almost 20 years old. The dissonance.... turn up your hearing aid?   You clearly don't understand the government contracting process, brother. We send people to die on front lines, keep the public safe, and make people's husbands, wives, children enter burning buildings with equipment from .....wait for it.....   ...the lowest bidder....   Just because something is used for a long time doesn't mean it's good. But it might be cheap and plentiful.   Please, continue to whine about new trucks in a thread dedicated to new trucks, which you've said you'll never own. We get it. Go tell everyone how you're stuck in time on a Panther forum. I mean, Jesus, an 86 isn't even one of the good Panthers.
    • KARNUT
      2027 GMC Sierra: Official Discussion

      By KARNUT · Posted

      It really is comical when people don’t agree or see the reason some people prefer the older vehicles. They become condescending. All the while they may be busting their knuckles on old vehicles. I have found memories of swapping out engines in my old GM cars in a weekend without much hassle. Unlike today. One wrong move a computer will shut you down. Even on something as easy as a brake job. There’s a pretty comical YouTuber called the car wizard. A garage owner who puts it all in perspective. Another Vicegrip garage that’s shows just how tough the old stuff is. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...