Jump to content

AVS Aeroskin

tyler.frost92

Recommended Posts

jimbofoxman Enthusiast

jimbofoxman

Posted
Posted

It will come off cleanly, it is easier than the factory badges and the dealership stickers. There is their logo etched into the bug shield though. It is under the raised badge. You can see it through the vinyl but barely. I will post a picture of that later when I get home.

 

Wonder if the raised logo could be sanded off and buffed smooth...........assuming it was going to be wrapped. Since they don't make my color, Tungsten Metallic. Guess I could go with smoke, since mine is such a dark color.

 

Wonder if it could be painted rather than wrapped? I got Tungsten Metallic to match.

  • Replies 34
  • Created
  • Last Reply
UofAZCats Enthusiast

UofAZCats

Posted
Posted

Here is my color matched aeroskin. This is not wrapped, just bought online for about $100 and very happy with the product and how well the color matches.46b84546c157b1b4749d663a704c01d6.jpga788c98845a3b9c920ccf086acbbf0d5.jpg013776be7a770ad22a416339bd69df32.jpg0a0304487a18777a6deea93ae3c96e46.jpgfa22e38fa13a4536089cdf86218e16db.jpg

 

Sent from my SM-G955U using Tapatalk

Where did you find the color matched option? Only on the Lund/AVS site? Unfortunately they don't have victory red.

CKrado Enthusiast

CKrado

Posted
Posted

Where did you find the color matched option? Only on the Lund/AVS site? Unfortunately they don't have victory red.

I saw mine on carid.com but bought it from autoanything.com since it was cheaper.

 

Sent from my SM-G955U using Tapatalk

mike72ss Enthusiast

mike72ss

Posted
Posted

Where did you find the color matched option? Only on the Lund/AVS site? Unfortunately they don't have victory red.

Yea, I want Victory red too!

dblaz4685 Enthusiast

dblaz4685

Posted
Posted

Looks awesome, I have been on the fence about getting one.....think that I might have too seeing these pictures

dman1458 Enthusiast

dman1458

Posted
Posted

I have the Aero skin but not colour matched. I wanted something to break up the silver, give it a little different look. This is the picture I used to make up my mind, this is not my truck.

post-171629-0-82602000-1505159171_thumb.jpg

post-171629-0-82602000-1505159171_thumb.jpg

post-171629-0-82602000-1505159171_thumb.jpg

post-171629-0-82602000-1505159171_thumb.jpg

bndawgs Senior Enthusiast

bndawgs

Posted
Posted

 

Wonder if the raised logo could be sanded off and buffed smooth...........assuming it was going to be wrapped. Since they don't make my color, Tungsten Metallic. Guess I could go with smoke, since mine is such a dark color.

 

Wonder if it could be painted rather than wrapped? I got Tungsten Metallic to match.

They have tungsten metallic.

 

It's part #

  • 322123-GXG
jimbofoxman Enthusiast

jimbofoxman

Posted
Posted

 

They have tungsten metallic.

 

It's part #

  • 322123-GXG

 

 

Thanks for the heads up! Funny they list it for the 2016 and not the 2015? Their is nothing different is there?

bndawgs Senior Enthusiast

bndawgs

Posted
Posted

 

Thanks for the heads up! Funny they list it for the 2016 and not the 2015? Their is nothing different is there?

The headlights are different, so i'm not sure if that causes the hoods to be different too or not.

j-ten-ner Senior Enthusiast

j-ten-ner

Posted
Posted

 

Wonder if the raised logo could be sanded off and buffed smooth...........

 

That's easy.

All it takes is a teenager who likes the logo and wants to decorate his bike with it.

 

:)

so long

j-ten-ner

bndawgs Senior Enthusiast

bndawgs

Posted
Posted

wow first ive seen these, i need one. does it help with bugs on the windshield?

I don't think so. I think they're more for protecting the front of the hood from rock chips

TNSmokee Enthusiast

TNSmokee

Posted
Posted

 

Wonder if the raised logo could be sanded off and buffed smooth...........assuming it was going to be wrapped. Since they don't make my color, Tungsten Metallic. Guess I could go with smoke, since mine is such a dark color.

 

Wonder if it could be painted rather than wrapped? I got Tungsten Metallic to match.

That sticker (logo) just peels right off. I don't even think it it true 3m adhesive because of how easy it comes off. I have had bandaids take more effort to get off.

TNSmokee Enthusiast

TNSmokee

Posted
Posted

Here is my color matched aeroskin. This is not wrapped, just bought online for about $100 and very happy with the product and how well the color matches.46b84546c157b1b4749d663a704c01d6.jpg

 

Sent from my SM-G955U using Tapatalk

Perfect, now I could've just bought the one already done and saved the aggravation of having mine wrapped. Damn this forum constantly costing me money. I've got to buy one to have as a backup. I've been worried about a rock or something hitting mine and cutting the vinyl.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Gkistler
      2015 Sierra Denali L86 cyl 5 misfire at idle

      By Gkistler · Posted

      Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...