Owners Pictures of 35" Tires on Stock AT4 or Trail Boss

TrailDemon · June 13, 2019

1 hour ago, Trailboss91 said:

Calm down boss, 90% of the people on here are installing bigger tires for aesthetic purposes, not off-roading. They fill out the wheel wells better. Didn't realize we were upsetting a consummate professional off roader. Guess its a good thing its not your truck.

Amen!

On 6/12/2019 at 8:25 AM, JuicyJosh said:

Well that definitely puts it in perspective ?

Bigger tires and no tire noise ?

newdude · June 19, 2019

On ‎5‎/‎21‎/‎2019 at 7:56 PM, obfirefighter22 said:

My LTZ 6.2 with the 2 inch trailboss lift, and 2 inch level. Have 22” Chevy RsT wheels, and toyo open country M/T

Question. First off, love it!

35x12.5x22 tire? Did they rub before leveling?

TrailDemon · June 20, 2019

Old tires 275/65/18 DURATRAC 45.8 lbs

New tires 325/65/18 Ridge Grappler 74.2 lbs

Fitment is flushy BUT 1lb unsprung > 3-4lb sprung ? . I might upgrade to lighter rotors down the road ?

MPG has dicreased from 22.2 to 17-18.5 ?

Edited June 20, 2019 by TrailDemon

smpldezine · June 21, 2019

On 6/7/2019 at 10:27 AM, Trailboss91 said:

295/70r18 Falken Wildpeak AT3W tires, 34.3” diameter with no trimming needed. No level as well.

Looks great!! Been going back and forth between this size and 275/70r18.. how is the drive with those weighing in at 68lbs a piece? Have any other pics?

Trailboss91 · June 21, 2019

56 minutes ago, smpldezine said:

Looks great!! Been going back and forth between this size and 275/70r18.. how is the drive with those weighing in at 68lbs a piece? Have any other pics?

Honestly the drive has been great. I do a lot of driving so I have already put 1500 miles on them. Ride smoother and quieter than the Duratracs, as for MPG’s only seen a .5 mile drop. Around town you will definitely notice it in stop and go traffic but on the highway the mpgs stay around 17ish. I will add more pics tomorrow.

Edited June 21, 2019 by Trailboss91

smpldezine · June 21, 2019

25 minutes ago, Trailboss91 said:

Honestly the drive has been great. I do a lot of driving so I have already put 1500 miles on them. Ride smoother and quieter than the Duratracs, as for MPG’s only seen a .5 mile drop. Around town you will definitely notice it in stop and go traffic but on the highway the mpgs stay around 17ish. I will add more pics tomorrow.

Ok thanks. Hoping they will fit my AT4.

PabloK · June 24, 2019

parts inbound!

PabloK · June 24, 2019

GMC BBK comes today as well..

Trailboss91 · June 26, 2019

On 6/20/2019 at 10:20 PM, smpldezine said:

Ok thanks. Hoping they will fit my AT4.

Another picture from today. Im betting they will fit on the AT4, im putting the 1.5” motofab level this weekend.

thsoccer3 · June 26, 2019

Everyone stating the 1.5" Motofab on AT4, is this the part number CH-15LM-TB lower mount spacer? It sure looks exactly like the CH-15LM they offer for a regular 4wd 2019, and makes me wonder what qualifies it for the AT4 when others aren't recommending the same level kit for the two vehicles.

I believe I am still leaning towards the Rough Country 1318.

Edited June 26, 2019 by thsoccer3

jtl1985 · June 28, 2019

On 2/13/2019 at 2:55 PM, destrada127 said:

I was kidding with the more room. I think it's the same if not less but I'm going to try the "hair dryer trick" on the fender liners to see if that'll give me a little more forgiveness. First pic is the rear of the fender well. 2nd pic is front

Sent from my SM-G965U using Tapatalk

I tried duratracs 35.1 x11.2 and I had maybe 1/4” to the liner. Not much room behind it either. If I cut the liner out in the spot I figure maybe 1/2” before I rub metal if I take it off-roading for hunting. Do you have any issues hitting bumps and dips if your in full lock?

Edited June 28, 2019 by jtl1985

thsoccer3 · June 30, 2019

Anyone running a 1/4” spacer have a part number for the AT4?

I am not very experienced in wheel spacers, but want to have the right ones handy in case the 295/60/20 rub on factory wheels or possibly install anyway just to improve stance.

NHAT4 · July 1, 2019

On 6/20/2019 at 10:20 PM, smpldezine said:

Ok thanks. Hoping they will fit my AT4.

Everything I read the AT4 front wheel opening is smaller than the TB... FYI

PabloK · July 1, 2019

Everything I read the AT4 front wheel opening is smaller than the TB... FYI

Yes this is true

Sent from my iPhone using Tapatalk

BlackLS · July 2, 2019

On 6/29/2019 at 8:45 PM, thsoccer3 said:

Anyone running a 1/4” spacer have a part number for the AT4?

I am not very experienced in wheel spacers, but want to have the right ones handy in case the 295/60/20 rub on factory wheels or possibly install anyway just to improve stance.

Bora are the best quality spacers available and they will make any size you need. I had them make me a custom 8mm thick with 78.1 mm hub x 106 mm bore spacer to fit my Fuel Maverick wheels.

I recommend their Hub Centric/Wheel Centric Spacers for a perfect fit.

http://www.motorsport-tech.com/index.html