Jump to content

Recommended Posts

Posted
How does it ride?

Sent from my SM-G930V using Tapatalk


Wow looks great! So you are basically at trail boss height with the 2” level kit and can fit 35s on aftermarket offset wheels


Sent from my iPad using Tapatalk
Posted

Fuel Shok Bronze 18x9 +1offset

with the Stock Duratrac tires - no additional lift or level

 

Discount Tire had ordered me a set of black lug nuts, but they were delayed so the chrome lug nuts are temporary.

 

20200316_180318.thumb.jpg.95d05614d451635410ee3d685272f9e3.jpg

 

  • Like 2
Posted

20x10 fuel assault -19 offset, centering rings, no spacers, 295/65 ridge grapplers, 6" fabtech lift, no rubbing

t1-2.jpg

t1-4.jpg

  • Like 3
Posted
On 3/5/2020 at 7:41 AM, KillerOfMillers said:

18x9 +1 Fuel Shok

295-70-18 Falken Wildpeak AT3

at4.jpg

I like this set up and stance. Looks good. What suspension setup are you on? any rubbing and/or cutting involved?

Posted
18 hours ago, gsp_phong said:

I like this set up and stance. Looks good. What suspension setup are you on? any rubbing and/or cutting involved?

Had some rubbing, a little minor trimming on mud flaps took care of it.  The front is lifted 1.5" over stock using FabTech DirtLogic coilovers, the rear is stock height also using DirtLogic shocks.  Kit also included Fabtech upper control arms. 

Posted
On 7/15/2019 at 12:09 AM, GJM32387 said:

Fuel Rebel 20x10 -18 Offset
No spacers
Nitto Ridge Grappler 295/55/20
Factory Trailboss Suspension
Slight Rub on mudflap on full lock.

14c27c1883075e810cb83e72b0f05fdc.jpg

0896e858fa51ebd098fdb9b1740a5bad.jpg

3a0ab97107d5216bad555200175cbf38.jpg

For stock, it sure sits level !

  • Like 2
Posted
On 3/11/2020 at 3:41 PM, Troger said:

Nice looking truck.  Were the side badge/vents easy to replace?  I'm looking at changing mine to those.

It's a W/T. That's how it came.

  • Like 1
Posted
On 9/20/2019 at 6:21 PM, foxcoupefan said:

17" Method MR 312s. 35/12.5/17 KO2s, Baja Kits Chase Kit Suspension (Front King coilovers w/remote reservoirs, boxed upper control arms, rear Kings w/remotes, 1" lift rear) . No rubbing.

 

 

20190829_180152.jpg

Love the setup - just ordered the same kit for my 2019 Sierra SLT.  What offset are you running on the Methods, what height are you running on the coils, and did you get the 1" block to bring it back to level (if so - where did you order the block)?

Sorry for all the questions, but I should be installing in the next couple of weeks.

 

Posted

285 45 22s on oem replicas. I went the budget route to get me into some 22s. Now im wanting to upgrade for a little more sidewall to either 275 50 or 305 45s. What y'all think?

20200323_152207.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Thanks!  I figured as such; GM and other manufacturers have used standard parts and harnesses across trim levels and such for decades.  I pulled the blank accessory cover off of my commuter van (a 2016 or so Chevy 15-passenger) years ago and found the plug for a USB outlet.  It wasn't connected to anything, though (I tried swapping in an outlet from another van).  I was a GM Tech years ago (late-90s) and was pretty familiar with my 2006.  I might be wrong, but I view newer vehicles (pretty much anything made in the past 20 years) as being a lot more plug and play.  Meaning, more unused wires and plugs unless you have the Mack Daddy of vehicles.    
    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...