Jump to content

Recommended Posts

Posted (edited)

STR OOFF-ROAD STR 84 20X10 0+

Delinte DX-12 285/55R20

No spacers (yet?)

Slight rub in reverse at full lock

IMG_2159.thumb.jpg.7d31f02eb5ac44d952da16de47da0a8e.jpg

FullSizeR.jpg

Edited by psychocadi
Add wheel brand
Posted (edited)

I went with some Walker Evans Bead locks on some bfgs. I have no rub, spacers, she clears brake calipers but just by a hair.

 

17x9 walker evans racing forged bead lock with some special engraving.

 

315,70,17 BFG ko2

 

CST lift at about 2 inch

20200710_172749.jpg

Edited by Fermy
Forgot brake clearance part
  • Like 2
Posted
I went with some Walker Evans Bead locks on some bfgs. I have no rub, spacers, she clears brake calipers but just by a hair.

 

17x9 walker evans racing forged bead lock with some special engraving.

 

315,70,17 BFG ko2

 

CST lift at about 2 inch

20200710_172749.thumb.jpg.b9ae487a2d0393bf868cad9a2cc5dd58.jpg

Looks sick man. Always a fan of more tire less rim. Been running that same tire for a little over year on my truck and the wife’s Yukon. 0 problems and they’re wearing very nicely. Super quiet and ride very good being a C rated tire.

 

 

Sent from my iPhone using Tapatalk

Posted (edited)

Dub Luxe 22x9.5 +20 in gloss black with Ridge Grapplers 285/50

 

Readylift 2” leveling kit

 

1A264DD3-16C4-4DD3-B621-37927B78953F.jpeg

Edited by grrr027
  • Like 6
  • Thanks 1
Posted

Fuel Vapor 20x10

Nitto Ridge Grappler 35x12.5

4” Zone suspension lift on top of factory TB 2” for a total of 6”

 

minor trimming of the wheel well 

CB4B2EE3-147A-4427-9978-D6438A6182A7.jpeg

F60D335C-CC93-46D0-B2E8-54F7BD871E64.jpeg

453E6584-BAB1-4E2B-80CE-77A8151FFDBD.jpeg

  • Like 5
Posted
On 7/27/2020 at 7:06 PM, grrr027 said:

Dub Luxe 22x9.5 +20 in gloss black with Ridge Grapplers 285/50

 

Readylift 2” leveling kit

 

1A264DD3-16C4-4DD3-B621-37927B78953F.jpeg

Nice! Look I'm going for without the lift, love the wheel design and black on black 

Posted

18X9 Fuel Maverick w/ 33X11.5 Nitto Terra Grapplers

Readylift +2 SST lift

 

No rubbing at all, I have a set of 35" Ridge Grapplers I may try on but I'm pretty sure they won't fit without a lot of trimming.

IMG_0925.jpg

Posted
7 hours ago, BassNBrew said:

18X9 Fuel Maverick w/ 33X11.5 Nitto Terra Grapplers

Readylift +2 SST lift

 

No rubbing at all, I have a set of 35" Ridge Grapplers I may try on but I'm pretty sure they won't fit without a lot of trimming.

IMG_0925.jpg

I would love to know if the 35s fit. I see people that say they do. I am ready to place an order for new tires and wheels but unsure what I can stuff in there. 

Posted

I need some help from the group. I’m ready to pull the trigger on new tires and wheels. I have an AT4 with a 2” Readylift level on it. I would like to go with 35s with 20x10-25. Does anyone have this setup?  I talked to Custom Offsets and they thought they would work if I trimmed the mud flaps. But I would like to hear from the experts here.  Also if someone has this setup where did they rub?  I do have a FabFour bumper so I have extra clearance in the front. 

1FBDC8C8-436D-41B5-A66F-DC164E6BE814.jpeg

Posted (edited)

I had Toyo Open Country AT3's installed about an hour ago.  Already much better than the OEM Michelins.  I wanted to keep the stock 18's (budget) and stock 265/65/18 size but wanted more aggressive looking tires that were not too loud, handled better in turns and were good in snow and on dry.  I don't do much off-roading but I had used K02's on my previous Jeeps.  Decided to try something new with the Toyos (they were 10 lbs lighter).  So far I'm impressed (only put about 20 miles on them).  Improved the look and driving dynamics quite a bit.  The ride is a little more firm and less "bouncy" which I like.  Just overall more composed.  If you're in the market, I recommend checking them out.

IMG_0079.jpeg

Edited by Mike Borowski
  • Like 2
Posted
On 7/31/2020 at 10:33 PM, TXguy said:

I need some help from the group. I’m ready to pull the trigger on new tires and wheels. I have an AT4 with a 2” Readylift level on it. I would like to go with 35s with 20x10-25. Does anyone have this setup?  I talked to Custom Offsets and they thought they would work if I trimmed the mud flaps. But I would like to hear from the experts here.  Also if someone has this setup where did they rub?  I do have a FabFour bumper so I have extra clearance in the front. 

 

I'll be glad to share some feedback on some of the builds we've done. Ok so even with the 2" Readlift on top of the factory lift our customers have experienced some decent rubbing when running 35"s with 10" wide wheels and negative offsets. You'll need to trim some plastics (see below) and also from the feedback I've gathered some metal as well. Regretfully we have done one locally they have all been out of state customers so I don't have images of the metal trimming required. I have heard from some customer that with the 20x10 -18 they got away with the below trimming only but I can't confirm that.

 

Today we're test fitting 35" tires on 20x9 wheels with your exact same lift feel free to email me at admin(@)wheelsasap.com if you like and I'll share my finding with you. After that test fit I'd have a better idea of any challenges you'll be facing.

 

Trimming guide: https://wheelsasap.com/gmc-at4-oversized-tire-trimming-guide/

Posted

Fuel Maverick D610

20x9 +20

nitto ridge grapplers 275/60r20

stock z71 suspension (only 3/4” of rake)

*No rubbing

0072F9EC-3192-41EB-ABA9-47034D2B40B7.jpeg

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...