Jump to content

2020+ T1 Chevrolet/GMC HD Quick Reference Guide

newdude
 Share

Recommended Posts

newdude Senior Enthusiast

newdude

Posted
Posted (edited)

Hope nobody minds, but I'm going to start up a Quick Reference Guide for common parts/fluids/bulbs for the T1 HD trucks.  I'll try to keep it updated if anything changes.  If a mod wants to sticky it, I'm down for that too. 

 

Owners Manuals

Oil Changes

 

6.6 gas L8T (VIN code "7")

  • Capacity: 8 Quarts
  • AC Delco Oil Filter: PF63E / 19383806
  • Drain Plug Size: 12X1.75X18.15

6.6 Diesel L5P (VIN code "Y")

  • Capacity: 10 Quarts
  • AC Delco Oil Filter: PF26 / 89017527
  • Drain Plug Size: 12X1.75X18.15             

Engine Air Filters

  • 6.6 Gas: A3244C / 84121219
  • 6.6 Diesel: A3248C / 84554703

Engine Fuel Filter

  • 6.6 Diesel L5P: TP1015 / 23304096

Interior Filters

  • Passenger Compartment Air Filter: CF185 / 13508023

Wiper Blades

  • Drivers & Passenger Sides: 23387857

Spark Plugs

  • 6.6 Gas L8T: 41-114 / 12622441

Glow Plugs

  • 6.6 Diesel L5P: 68G / 12690238

Fuel Tank Sizes

  • 6.6 Gas L8T, All Box/Cab Configurations: 36 Gallons
  • 6.6 Diesel L5P Double Cab Long Box/Crew Cab Standard and Long Box Configurations: 36 Gallons.  
  • 6.6 Diesel L5P Double Cab Standard Box Configuration: 29 Gallons.
  • 6.6 Diesel L5P Regular Cab Long Box Configuration: 28 Gallons.

Diesel Exhaust Fluid

  • Tank Capacity: 7 gallons

Automatic Transmission Fluid

  • 6L90 6 Speed MYD (Gas engine): DEXRON-VI Automatic Transmission Fluid
  • 10L1000 10 Speed MGM/MGU (Diesel engine): DEXRON ULV Automatic Transmission Fluid.

Transmission Capacities (Approximate):

 

6L90 6 Speed MYD (Gas engine)

  • Pan Drop: 6.0 quarts
  • Overhaul: 10.5 quarts
  • Complete System: 12.4 quarts

10L1000 10 Speed MGM/MGU (Diesel engine)

  • Overhual: 20.6 quarts
  • Complete System: 22.08 quarts

Transfer Case Fluid

  • Electronic Shift Non-Autotrac MP 1625/1626–NQF: Dexron VI

  • Electronic Shift Autotrac MP 3025–NQH: Dexron VI

Transfer Case Fluid Capacities

  • Electronic Shift Non-Autotrac MP 1625/1626–NQF: 2.4 Quarts
  • Electronic Shift Autotrac MP 3025–NQH: 1.6 Quarts

Brake System

  • Hydraulic Brake System (Vehicles with DOT 3 brake fluid): DOT 3 Hydraulic Brake Fluid

  • Hydraulic Brake System (Vehicles with DOT 4 brake fluid): DOT 4 Hydraulic Brake Fluid

Wheel Lug Nut Torque

  • All Models: 140 lb-ft / 190 N-m

Front Axle 9.25"

  • Axle Lubricant: 75w85 Synthetic High Efficiency Lubricant, 10-4091 / 19300457
  • Capacity: 1.9 Quarts

Rear Axle 11.5"

  • Axle Lubricant:75w90 Synthetic Lubricant, 10-4016 / 88900401
  • Capacity: 3.17 Quarts

Rear Axle 12.0"

  • Axle Lubricant:75w90 Synthetic Lubricant, 10-4016 / 88900401
  • Capacity: 3.17 Quarts
Edited by newdude
  • Like 13
  • Thanks 2
  • Replies 30
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

newdude
newdude

Hope nobody minds, but I'm going to start up a Quick Reference Guide for common parts/fluids/bulbs for the T1 HD trucks.  I'll try to keep it updated if anything changes.  If a mod wants to sticky it,

BCGM
BCGM

Hi NewDude  Will you be doing this for 2024 Chevrolet 2500 HD's Thank You !

newdude
newdude

Lighting Systems - Chevrolet   Halogen Headlamps (WT/Custom/LT) Low Beam: H11 High Beam: 9005 Marker/Turn Signal: 7444NA LED Headlamps (LTZ/High Country)

Posted Images

newdude Senior Enthusiast

newdude

Posted
  • Author
Posted

Lighting Systems - Chevrolet

 

Halogen Headlamps (WT/Custom/LT)

  • Low Beam: H11
  • High Beam: 9005
  • Marker/Turn Signal: 7444NA

LED Headlamps (LTZ/High Country)

  • Low Beam: LED (part of lamp assembly)
  • High Beam: LED (part of lamp assembly)
  • Marker/Turn Signal: 7444NA

Fog Lamps: LED assembly

 

Tail Lamps - Incandescent

  • Stop/Turn: 7444LL
  • Marker: 194
  • Backup: W16W

Tail Lamps - LED

  • Stop/Turn: LED (part of lamp assembly)
  • Marker: LED (part of lamp assembly)
  • Backup: W16W

License Plate Lamp: 194

 

CHMSL: LED assembly

 

Lighting Systems - GMC

 

LED Headlamps (Base/SLE)

  • Low Beam: LED (part of lamp assembly)
  • High Beam: LED (part of lamp assembly)
  • Marker/Turn Signal: 7444NA

LED Headlamps (SLT/AT4/Denali)

  • Low Beam: LED (part of lamp assembly)
  • High Beam: LED (part of lamp assembly)
  • Marker/Turn Signal: LED (part of lamp assembly)

Fog Lamps: LED assembly

 

Tail Lamps - Incandescent

  • Stop/Turn: 7444LL
  • Backup: W16W

Tail Lamps - LED

  • Stop/Turn: LED (part of lamp assembly)
  • Marker: LED (part of lamp assembly)
  • Backup: LED (part of lamp assembly)

License Plate Lamp: 194

 

CHMSL: LED assembly

 

  • Like 1
newdude Senior Enthusiast

newdude

Posted
  • Author
Posted (edited)
31 minutes ago, BB&Chiveon said:

crew cab l5p standard is 36 gal fuel tank

 

Order guide does indicate 36 gallon for diesel CCSB, CCLB and DCLB, but all print information like the owners manual and GM service info don't show a 36 gallon tank with diesel engine.  I see you have a 2020HD, can you confirm the 36gal with a diesel? 

 

EDIT:  And now to make things more interesting, the 2020 upfitter manual shows all cabs and engines getting a 36 gallon tank.  So that's 3 different sources from GM that all have a varying fuel tank capacity/cab relation on the diesel engine. 

Edited by newdude
Gecko50 Enthusiast

Gecko50

Posted
Posted

I can not believe that the diesel tanks are 28 gallons for a long bed dually? wow why not the larger tank? I guess those aftermarket tank companies will be making some money.

  • txab pinned this topic
jjackkrash Enthusiast

jjackkrash

Posted
Posted

Both my 2013 and 2016 standard bed Crew Cab with Duramax  came with 36 gal tank, so did my '19 DRW Crew Cab with long bed and Duramax.  I seriously doubt GM is going backwards on this.  

Gecko50 Enthusiast

Gecko50

Posted
Posted (edited)

Ok I just went thru the GM ordering guide and looked for fuel tanks. There are "3" yes three tanks options available to order. CODE N2L is for 40 GALLON rear tank, Then there is CODE N2M IS FOR 23.5 GALLON AND THERE IS A CODE N2N FOR A DUAL TANK SET UP FRONT AND REAR TOTAL OF 63 GALLONS. So now that clears everything up. Don't everyone rush to the dealers and order dual tanks. I got this from the "GM RPO Codes" They are available for both the regular and crew cabs and per note "1-Equipment Group 1SA available on all models"

 

   https://www.gmfleetorderguide.com/NASApp/domestic/proddesc.jsp?year=2020&butID=1&regionID=1&divisionID=1&vehicleID=21694&type=0

 

Chuck

Edited by Gecko50
  • 2 weeks later...
newdude Senior Enthusiast

newdude

Posted
  • Author
Posted (edited)
On 9/13/2019 at 11:23 AM, Gecko50 said:

Ok I just went thru the GM ordering guide and looked for fuel tanks. There are "3" yes three tanks options available to order. CODE N2L is for 40 GALLON rear tank, Then there is CODE N2M IS FOR 23.5 GALLON AND THERE IS A CODE N2N FOR A DUAL TANK SET UP FRONT AND REAR TOTAL OF 63 GALLONS. So now that clears everything up. Don't everyone rush to the dealers and order dual tanks. I got this from the "GM RPO Codes" They are available for both the regular and crew cabs and per note "1-Equipment Group 1SA available on all models"

 

   https://www.gmfleetorderguide.com/NASApp/domestic/proddesc.jsp?year=2020&butID=1&regionID=1&divisionID=1&vehicleID=21694&type=0

 

Chuck

 

This information applies to 3500 HD CHASSIS CAB ONLY.  It is NOT applicable to 2500hd and 3500hd regular pickup trucks.  All the info at the top of the page is for regular pickup as well, although most of the info does interchange with chassis cab.      

Edited by newdude
newdude Senior Enthusiast

newdude

Posted
  • Author
Posted (edited)

Update 10/2/19.  I've revised the fuel tank section.  There are just two mysteries on the diesel, the double cab standard box (29gal) and regular cab long box (28gal).  Both really have yet to hit lots so I'm still unsure if these are for real or not, but GM's documentation states this to be the case.

 

   

 

 

Edited by newdude
Gecko50 Enthusiast

Gecko50

Posted
Posted
18 hours ago, newdude said:

 

This information applies to 3500 HD CHASSIS CAB ONLY.  It is NOT applicable to 2500hd and 3500hd regular pickup trucks.  All the info at the top of the page is for regular pickup as well, although most of the info does interchange with chassis cab.      

I could only wish they would offer dual tanks. I stand corrected as you sir are correct. I guees the aftermarket tank builders get more sales.

 

Chuck

  • 2 weeks later...
redwngr Senior Enthusiast

redwngr

Posted
Posted
On 10/2/2019 at 5:58 PM, newdude said:

Update 10/2/19.  I've revised the fuel tank section.  There are just two mysteries on the diesel, the double cab standard box (29gal) and regular cab long box (28gal).  Both really have yet to hit lots so I'm still unsure if these are for real or not, but GM's documentation states this to be the case.

 

   

 

 

AND, in the 2020 sierra owners manual:

 

2500 Series and 3500 Series Standard Box (Except Double Cab Diesel) 136.3 L 36.0 gal

and

2500 Series and 3500 Series Long Box (Except Regular Cab Diesel) 136.3 L 28.0 gal 

 

To save everyone getting out the calculator 136.3 L is same as 36.0 us gal   (not 28 gal)

 

Regardless, assuming they are both 136L and the 28.0 is a actually a typo,  that still leaves leaves double cab std box with 111 L /29.4 gal  

and the reg cab long box, with a 106 L / 28 gal. 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      If everything checks out at the MAF, then the MAF is BAD, new or not.   You don't need a signal generator to troubleshoot this. PCM needs ALL powers and ALL grounds able to light a halogen headlight bulb - if it can light the bulb bright, then the wiring is good enough to run the PCM.   Best thing you can do for yourself is spend some time here: scannerdanner.com - Check out all his YouTube videos on similar issues. If you decide to subscribe it's the best bang-for-buck ratio in the automotive world, hands-down. He's got TONS of free vids on YouTube, too.
    • Tyler Gibbs
      PF63 Oil Filters Going Away?

      By Tyler Gibbs · Posted

      You got that Hengst D110??
    • contrabombarde
      2010 Avalanche 5.3 not running correctly after engine swap.

      By contrabombarde · Posted

      Yes, I used my multimeter to probe all of the wires at the MAF, both with the sensor connected, sensor disconnected, key on engine off, key on engine running, etc etc etc. I probed all of the wires again at the PCM, at the connectors, etc. All voltages are what they should be according to the service manual/wiring diagrams. All grounds are good, less than 20 millivolts from the battery negative under load. Both at the connector of the MAF, at the PCM connector etc.      I know this throws a pretty big wrench into things, but this truck was acting up before the swap. I don't have very much information, if any on what was causing it, but if you cleared all of the dtcs it would do the same thing where it would crank, fire, then die. And it would do the same thing a dozen or so times, and eventually it would start and run, but the difference is that it would run and actually be drivable. Whereas now if you can drive it at all, it goes into reduced power mode almost immediately, and even then it's not running correctly. When you come to a stop at a light it stumbles down to for 500 RPM before catching itself and returning to the smooth idle. And if you go more than about 50% throttle then it immediately goes back to doing the misfire thing.    Like I said, I know that throws a wrench into things, and unfortunately I was not able to pull any data or anything like that before I did this work, so I don't have much to go on.    I'm trying to not fixate on one particular thing as the cause of the problem, but it seems like all avenues are pointing me towards the PCM. Like I said I have tested the wiring extensively (see above), and during cranking the sensor does produce seemingly legitimate values at least according to my multimeter, but as soon as the engine fires those values quickly descend into gibberish. I've tried it with multiple different known working sensors, I have done literally every test I can think of multiple times on the wiring (probing the signals, probing the pins with the sensors unplugged, probing the pins at the PCM, voltage drop, voltage drop under load, continuity, ohms, and double-checking everything against the wiring diagrams/ proper values in the service data.)    Another thing that pushes me towards a possible PCM failure is, I have noticed in troubleshooting a little bit taking a break and coming back, that when I leave the truck to sit for a while and cool off, it starts and runs smoothly when I first start it up. However once it warms up. It starts having problems. For example, when I went out to the truck this morning after it had been sitting overnight, I was actually able to drive it down the block. And then once I got on the throttle a Little bit after going about a thousand ft, it started misfiring again. I pulled it back into the driveway, shut it down, and started it back up. It idled smoothly. As soon as I touched the throttle it did the misfire thing again. From then on as soon as I started it it would misfire. I shut the truck off and went to go get a coffee and do a bit more research. When I came back out I started the truck up and it immediately went into the smooth idle. After a couple of minutes of playing around with it, it would not idle smoothly anymore. Let it sit a couple of hours, rinse and repeat. This makes me think with temperature change something is going wrong inside the PCM. I have the PCM out of the 2007 donor vehicle and I'm thinking of getting a one-day subscription to the ACDelco programming service to try and program that and see if it helps.   Like I said, I'm really trying to not fixate myself on one potential cause, but it seems everything is pointing me towards PCM failure. I would really like to try to confirm that, but unfortunately I don't have an oscilloscope or a signal generator to do the GM service procedure where you feed 5 khz into the signal pin. 
    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      Ahh, sorry about that - I got some bad info. Newdude is correct. That's what I get for working 13 hours straight ... on my "vacation", lol.   Should've checked the files I had instead of the internet.   Anyway ... this is GREAT news, since this would've been an absolute friggin nightmare to get working.   I don't think the lack of VVT is causing this - you've got another issue. Wiring, I'm betting.   I'm telling you right now, your computer isn't bad. If it worked before the swap, it's working now. You need to do some more (better) diagnostics and figure out exactly what you're missing. Did you test every wire directly at the MAF? Have 5V reference? Ground? If you're reading ZERO g/s, your Hz isn't much use - it's going to be the wrong value anyway. The MAF is not working, and you need to find out WHY.   I got this off the net, so VERIFY first: Pin A: Black (BLK) wire, Circuit 552, serves as the Sensor Return (Ground).  Pin B: Tan (TAN) wire, Circuit 472, carries the Intake Air Temperature (IAT) signal.  Pin C: Yellow (YEL) wire, Circuit 492, is the primary MAF Sensor Signal output to the PCM. Pin D: Pink (PNK) wire, Circuit 339 or 539, provides Ignition 1 Voltage (Power).  Pin E: Tan/Black wire, Circuit 552 or similar, often associated with the Intake Air Temperature ground or signal return.  Global-A list: https://postimg.cc/KKJnQC85    
    • parthery
      GM Hard Folding Tonneau by REV review

      By parthery · Posted

      Correct....the end user can't reach to Realtruck directly like they can if they purchase a Bak, Undercover, etc...  It has to go through a dealer.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...