Jump to content

LTZ Plus Package vs LTZ Premium opinions please


Recommended Posts

Posted

New member here everyone. I need some opinions. I’m about to buy a 2019 Silverado 1500 LTZ crew cab Z-71 short bed. I can’t decide between the 2 packages. The plus package has just about all I would ever need. But. The premium package truck also has the technology package which is kinda neat. The price difference is around $2400 between the trucks. My worry is all the extra electronic extras which are nice to have will malfunction over time and it will cost a small fortune to fix. Which would you get? And why? Thank you. 

Posted

For me I wanted the extras.  Anymore these trucks are rolling computers and issues are going to happen even in the base model trucks for the most part.  It seems there are updates being downloaded all the time and it is just something we are going to have to get use to it.  Hopefully in time things will work out better.  Kind of like Windows.  Windows 95 was OK, then came 98 and so finally Windows 10 seems to be the most stable, at least for me it is. 

 

Hopefully future vehicles will be the same way.  It isn't so much the mechanics will go bad but what controls them with simple glitches.

 

So getting what you want would be the most important thing. Especially for the price we pay now for these trucks.

Posted

You’re already looking at a pretty expensive truck, so assuming your budget allows that small percentage more, I’d get the premium for sure.


Bose stereo (non-Bose one sounds hideous), navigation, added safety features, cool technology, all worth it. You cannot add those missing goodies later for that price difference; some cannot be added for any price.

 

The forum and FB groups are full of people who thought they’d be happy without something, but once the newness wears off they here are spending way more to add missing options a la carte than the whole package would cost when buying new...not to mention all the effort involved.

 

Mine is equipped like the premium with tech package you are looking at. None of these added features have been cause for any dealer visits over the course of 10 months. None have been subject to any major bugs at all. No regrets.

Posted

If you ever though you wanted it you do. I bought my 17 off the lot something I just don't do but I was in need of truck right now. I bought what they had and told myself it would be good enough. It's not now I'm in the process of ordering a 2020 and I'm sure going to take a beat down on my 17. One dealer offered me $29000 no way I can take that. I don't want the LTZ I want a RST but loaded. I want black on black on black no chrome.

If you want it get it Don't do like I did.

Posted

Some want the extra stuff, some don't.   

 

Some more LTZ option package info for 1500's

 

PCZ         LTZ Convenience Package, includes (A50) bucket seats with (D07) center console, (KQV) heated and ventilated front seats, (A48) rear sliding power window, (UG1) Universal Home Remote, (MCZ) 2 USB ports with auxiliary input and (QT6) power up/down tailgate; Crew Cab models include (KA6) rear heated seats

 

PCN         LTZ Convenience Package II, includes (IOT) Chevrolet Infotainment System with Navigation and 8" diagonal color touch-screen, (UQA) Bose Premium Audio System and (K4C) Wireless Charging
1 - Requires (PCZ) LTZ Convenience Package.

 

PDF         LTZ Plus Package, includes (PCZ) LTZ Convenience Package and (PQB) Safety Package
1 - Not available with (PDK) LTZ Premium Package or (PDL) LTZ Texas Edition. 

 

PDK         LTZ Premium Package, includes (PCZ) LTZ Convenience Package, (PCN) LTZ Convenience Package II, (PQB) Safety Package, (PDJ) Safety Package II, (CF5) power sunroof and (RD2) 20" Polished finish wheels
1 - Requires Crew Cab model. Not available with (PDF) LTZ Plus Package or (PDL) LTZ Texas Edition. (RD2) 20" polished finish wheels may be upgraded to (SEW) 22" 5-spoke Dark Silver aluminum wheels with Chrome, LPO or (SF0) 22" Bright Chrome wheels, LPO. 

 

PDL         LTZ Texas Edition, includes (PCZ) LTZ Convenience Package, (PQB) Safety Package and Texas Edition badging
1 - Texas Edition is only available to order by Dealers located in the states of Arkansas, Louisiana, New Mexico, Oklahoma and Texas. Not available with (PDF) LTZ Plus Package or (PDK) LTZ Premium Package. 

 

PQB         Safety Package, includes (UD5) Front and Rear Park Assist, (UKC) Lane Change Alert with Side Blind Zone Alert and (UFG) Rear Cross Traffic Alert
 - Includes Perimeter Lighting. 2WD models include (V76) front recovery hooks. Included with (PDF) LTZ Plus Package, (PDK) LTZ Premium Package or (PDL) LTZ Texas Edition. 

 

PDJ         Safety Package II, includes (UEU) Forward Collision Alert, (UHX) Lane Keep Assist with Lane Departure Warning, (UHY) Automatic Emergency Braking, (UKJ) Front Pedestrian Braking, (TQ5) IntelliBeam headlamps, (UE4) Following Distance Indicator, (KSG) Adaptive Cruise Control - Camera and (HS1) Safety Alert Seat
1 - Requires (PQB) Safety Package. Included with (PDK) LTZ Premium Package.

Posted

always buy interior options you want, cuz most likely you cant later...now buying an AT4 or TB is something I wouldn't do ..I can put way better lift and suspension on truck for far far less money.....but interior options are hard and sometimes not even doable or crazy expensive

 

ranchos suck imo….guess you get 2 spd transfer case tho if you need it but there is way better suspension out there 

Posted
On 11/18/2019 at 6:11 AM, mcgee500 said:

If you ever though you wanted it you do. I bought my 17 off the lot something I just don't do but I was in need of truck right now. I bought what they had and told myself it would be good enough. It's not now I'm in the process of ordering a 2020 and I'm sure going to take a beat down on my 17. One dealer offered me $29000 no way I can take that. I don't want the LTZ I want a RST but loaded. I want black on black on black no chrome.

If you want it get it Don't do like I did.

Go for the upgraded premium package. And it always works out cheaper to buy one off the lot where the dealer is paying monthly fees to keep it there against none for one on order, plus if your order is delayed and current rebates expire......you're SOL. Plus you can test drive and examine for flaws in paint and choose the pick of the litter from those already on the lot.

 

I always buy off the lot without regret and get a better deal than one I would have to order....trick is to go to a dealer with a large inventory and buy one with more options including your must haves.....and usually works out cheaper than one you would order and wait and wait while rebates expire. Through the years as you enjoy those extra options that you would not have originally ordered....instead of regret for going cheap and not originally ordering, you'll say: "That's-a-nice"!

Posted

I still can't believe backup sensors didn't come with my LTZ when they were on my last two LT's. I wish i would have paid more attention  when ordering. I miss that feature. 

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • "Teardown" is complete. Head surfaces are clean and ready, new intake is prepped and ready. Coolant drained and water pump is removed, radiator is removed, new hoses and pump are ready.   The replacement intake is also from a '95 (with I think 260k, the odometer said). Noticeably less pitting where it covers the rear coolant passages. I'm not sure if that's a tribute to more frequent use, more frequent coolant changes/upkeep, or if the intake was machined at some point. But it appears I found a good one.   My coolant hoses were original, and the lower hose still retained the factory spring inside. It's not really rusty, but it's got deposits all over it. Unsure if I should re-install it (will thoroughly clean it first). Someone said hose technology has gotten better since 1995 (has it?) and I don't need the spring. I think modern EPDM is what made those hoses last from 1995-2026, so it's a question of how much suction can the water pump really pull, and will it collapse the hose without a spring?   I'm stopped and waiting for parts, however.   When I first brought the truck home, the fan was intermittently hitting the radiator shroud. I could see someone had monkeyed with the shroud (put a bunch of cardboard as a spacer between the upper/lower shroud halves. Someone said the motor mounts have likely failed and the engine has sagged. I wasn't sure I believed that. The engine is really solid in its mounts: To remove the old intake I *just* nearly permanently welded to the heads with freshly cured RTV and gasket snot two weeks ago, I literally had to use the arms on my lift and a chain with a bolt attached to the intake to pull it loose. It almost picked the front of the truck off the ground before ....scuuuuuuuuuuup.... I could actually hear the gaskets tearing and it broke loose and the whole truck settled back down. Motor barely moved.   SO, those parts I'm waiting on... The lower radiator mounts/bushings had completely failed. The radiator needs to be insulated from the rad support, and the bushings help the rad stand at the correct height. The plastic "baffle" was also destroyed at some point. Someone had attached the shroud to it incorrectly, overlapping a joint that should have been underlapped, creating another suspect issue potentially causing things to hit the fan. Broken tabs, side is busted off, and it's perma-formed/bent where it was jimmied incorrectly.   The baffle? Unobtainum. Long since discontinued from GM, of course. Aftermarket/capa/chinese? Also unobtanium. In GM's infinite wisdom, it appears there are at least two different variations whether the Blazer is 2 or 4 door, and I can't yet tell if they shared the same part with the S-pickups. Plan B, if I can't find a viable used one, will be to create a bracket to re-assemble the critical joint I need to seal a gap with the shroud. But that will bug me, it won't be...perfect.   The water pump bolts appear to have been installed with...plumber's putty. I guess, sure, if it works...? I've found a few "backyard fixes" like that. Someone's been here before....   If I can't find someone to jam bamboo under my fingernails to fill my free time this week I think I'll install the driver's power window motor and replace the rear door speaker that's inop. I've got a genuine GM "9.5" ohm working replacement. Why GM used a non-standard resistance....nevermind. Of course they did, you can get more sound from a cheap factory amp that way.   And the saga goes on...
    • // Thank you, also for your  response. More information is always good. This 2013 GMC is most likely my 'forever truck"-I'm 77 and retired...and truck only has 42K on it-very clean-so I try to keep it that way.  Tks again for your  response- glenn
    • I started my install this weekend. Everything was pretty straight forward but I ran into one issue with running power through the firewall. The nipple grommet on my High Country already has a small harness running through it - has anyone else ran into this issue? And on the engine bay side, does the wire basically just penetrate the factory wiring boot? I did this on my '22 Trail Boss and it seems much easier but thats been a few years. My other thought would be possibly drilling a new hole adding a rubber grommet just to the lower left of the factory hole. Thoughts?   Has anyone used a T-harness off the Bose amp and obtained power from there? It seems a little odd that such a small amp needs 3 power leads
    • ///// Ok--Thanks for that info--I could not find yesterday when I looked for the specs on that NAPA filter what I wanted. Their website is not very user friendly. I buy all teh filters for  our three vehicles once or twice a year. Have always run NAPA Gold on everything I own....I buy it thru my Son's account for his business-which he has a Heavy Equipment repair shop-one reason he uses NAPA so much-they have such a full line of coverage for just about anything/anywhere- He gets s  good discount because of volume bought. Anyway-Thank you -Sir for your response.   glenn
    • It is possible to add your own 12v outlet to your truck.  Check out this video:   I verified via GM Upfitters that pin 31 is the same on the 1500 trucks.  The wire is GM part number 84779405.   You can get the GM 12v outlet from Amazon  https://www.amazon.com/Genuine-Accessory-Receptacle-25774623-13549530/dp/B0F1H9YRGF EWAY 12 Volt Power Adapter for GM   https://www.amazon.com/EWAY-Chevrolet-Silverado-Cigarette-Ignition/dp/B0915RRW6Q/ref=sr_1_1?   I just haven't figured out a good place to put the 12v outlet in my truck.   Some people are getting USB-C to 12V adapters  https://www.amazon.com/WYMECT-Cigarette-Lighter-Socket-Adapter/dp/B0F87WNQKB/ref=sr_1_1_sspa? Not sure if they provide the correct amperage that a device like a tire inflator would need.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...