Jump to content

Recommended Posts

Posted

Should have clarified a bit. I will replace front and rear shocks, that's the numbers I listed if they are the correct ones.

Posted
23 minutes ago, wurgs said:

Should have clarified a bit. I will replace front and rear shocks, that's the numbers I listed if they are the correct ones.

Rear AT4/Trail Boss - B8 5100 Series 0-1″ Lift Rear (24-309516)

 

Front AT4/Trail Boss - B8 5100 Series 0-1.1″ Ride Height Adj Front (24-309509)

 

This is what you need if you want t8 change the rancho's in a AT4 or Trail Boss. 

Posted

Thanks!

Posted

Our new RST Duramax finally arrived! I had dealer install the 5100's with the fronts set at at 2", and now the truck looks level front to rear. Front's are # 24-293297 and rear's are # 24-293471. The ride with the Bilstein's is excellent. Added Toyo AT3's (definitely more aggressive looking than the AT2's on our old truck, but much quieter). Side steps are GM's 4" round. Ordered a Leer canopy at the same time as the truck but told still weeks away with production delays. Have various trailers for business and personal use so we are having the Firestone Ride Rite airbags installed at same time as the canopy. This will help keep truck level when the heavier trailers connected and/or truck bed full of gear. 

 

2021 RST.jpg

  • Like 1
Posted

Hi there!

 

I've always run big tall tires but with this truck decided to initially start with LT275/65R18. 

Posted

For those looking to do this upgrade, here's my review of them.

 

2019 Silverado HC, 6.2L

 

My biggest complaint with the stock suspension was the "kick" of the back end on certain sharp bumps on roadways.  Often, it would make the the truck feel unsettled, as if it kicked sideways a bit, then had to recover to straighten out. I didn't mind any type of floating ride, but that kick wasn't good.

 

Had the Bilsteins put on front and back by a GM dealer (plus a 1 inch block in the back)... think they charged me around $500 for the labor.  Have the front shocks on highest lift setting.  I didn't measure it before, but it raised it quite a bit.  Upon first driving it, it is just a tad firmer than the stock shocks, BUT... because it got rid of 90% of that kick out, bumps actually do feel better, less harsh, and more controllable. It's hard to explain, but a definite improvement over stock.  I've probably put 3-4K miles on it now, and every time I drive it, I'm more impressed with the Bilsteins.  You may not notice a night and day difference, but IMO the noticeable change in ride and how it handles bumps is well worth it.  Going to try some Ridge Grapplers and wheels now to see if I can make a larger than stock size fit.

 

Posted (edited)

I hooked up our little fully loaded dump trailer yesterday and with the Bilstein 5100's the ride over bumps was excellent. Zero back end sway or bounce as the shocks are quick to settle the truck down.

 

Only thing of note is the rear springs of this truck are quick to sag even with the tongue weight of the trailer empty. The airbags will definitely help.

Edited by DVR
  • 2 weeks later...
Posted

Ok, here we go guys and gals

 

I'm been a 2500 guy for 30 years and have always ran stock Bilstein's on my trucks. This is the first 1500 I've had in an extremely long time and as such have a few questions.  Oh, it's a 2020 1500 RST CC Z71 with the 5.3 standard box.  I love the truck especially the ride, quite the difference between the 15's and 25's in ride

 

Anyways, first off the Rancho's sux.  I already have 20k on the truck and I'm looking for shocks.  I'm looking at the 5100's as that is what I've always ran on my 2500's.  I don't care about it being lifted or leveled, ok, maybe a little on level.  What I care about is hauling and towing as after all it's a truck.  I'm thinking of going with the rears set at zero and the fronts maybe an inch, but not much more.  That way it looks a little more level.  But my main concern is the rears as I'm almost always hauling something in the bed or towing.  I tow a 7 x 16 enclosed snowmobile trailer, 2 place pwc trailer, 2 place snowmobile trailer and dump trailer.  Depending on the what I'm towing or hauling the back sags, not what I'm use to with having 2500's.  I'm thinking of getting a set of air bags also.  But the first order of business is the shocks.  Would 5100's  the Bilstein B6 24-293471 be best for the rears and the Bilstein B8 5100 24-293297 for the fronts?  Does anyone think the rears should go up a inch and maybe the fronts 2?  Also, what airbags works best for towing and hauling.

 

Thanks in advance for the help

 

Oh, I plan on running the stock tire size once the factory ones wear out, if that makes a difference.

Posted

If you’re running the stock size tires I wouldn’t level it at all. Run some Bilstein 4600’s and call it good. 

Posted

Hi rv245.

 

I had the Firestone Ride Rite airbags installed last week. What a difference when towing the loaded little dump trailer or the boat...no more sag. Haven't hooked up the travel trailer yet but the tongue weight is close to the loaded dump trailer. With the Bilsteins and airbags the ride quality is great. 

 

Now if only that back ordered Leer canopy would arrive!!

 

Posted
8 hours ago, DVR said:

Hi rv245.

 

I had the Firestone Ride Rite airbags installed last week. What a difference when towing the loaded little dump trailer or the boat...no more sag. Haven't hooked up the travel trailer yet but the tongue weight is close to the loaded dump trailer. With the Bilsteins and airbags the ride quality is great. 

 

Now if only that back ordered Leer canopy would arrive!!

 

How many weeks have you been waiting for your topper? It’s 10 weeks for me.

Posted
11 hours ago, DVR said:

Hi rv245.

 

I had the Firestone Ride Rite airbags installed last week. What a difference when towing the loaded little dump trailer or the boat...no more sag. Haven't hooked up the travel trailer yet but the tongue weight is close to the loaded dump trailer. With the Bilsteins and airbags the ride quality is great. 

 

Now if only that back ordered Leer canopy would arrive!!

 

Took 10 weeks for my ARE shell as well.

  • 4 weeks later...
Posted

I swapped out the stock rear rancho shocks on my '21 LTZ for the 5100's  about 1k miles ago and couldn't be happier.   It's my first ever pickup truck after many years of minivan or compact car driving and the rear end hop over road irregularities was quite disappointing and a bit unnerving.   Thanks for all the info and advice in this thread for pushing me towards the Bilsteins.

 

I did  the rear shocks myself in the driveway, but the fronts will need to be done by a shop.  Fronts appear to be out of stock everywhere I have looked, so it may be quite a while before they can get done.  

 

Have any of you left the fronts stock long term and just switched out the rears?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I’m definitely interested to hear the end result here. 
    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...