Jump to content

Bilstein shocks thread

yanzhixiang

By yanzhixiang
in Modifications & Accessories

 Share

Recommended Posts

amxguy1970 Senior Enthusiast

amxguy1970

Posted
Posted
23 hours ago, bhales said:

perfect stance, good looking truck!!

 

17 hours ago, navyguy357 said:

Thats a good stance.

Sent from my SM-G955U1 using Tapatalk
 

23 hours ago, jwtero said:

Purchased my 2014 Sierra 4WD a month ago, was already leveled unknown kit. The oem Ranchos were garbage and worn. I installed the Bilstein B8 5100s after reading this thread. Set at highest setting, removed the lower level and kept the top of strut level piece installed. Upgraded to 2” rear blocks and measures dead level 40.5” all around. Installed the shocks on the rear bolts down with the sticker reading correctly. Rides great and planted. Also put on 285/55/22 Nitto Ridge Grapplers. 

E45AACBD-95D0-4D81-AA86-124EE4C7E300.jpeg

Perfect stance? It looks nose high like Cali style trucks. It may measure level but many people on here know that when you do that it doesn't look it...

 

I'd remove the top spacer and just run the Bilstein's at the top setting. This way it retains some rake as a truck should, doesn't look nose high and will wear less on the front end since stacking leveling kits and running that high is never good for the truck. Did you adjust your headlights down after all of this? 

 

Tyler

  • Like 1
  • Replies 2.8k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

bwilloby46
bwilloby46

I put the bilstein 5100s on the rear of my 14 High Country with a new 2" block a few weeks ago. Ride is unbelievable compared to stock. Liked it so much I got the adjustable 5100s for my front, remove

schloppy
schloppy

Hello, I'm not new to the forum but I just joined and figured I'd contribute to the community.   2016 Silverado 1500 "Z71" removed rancho's and swapped with Bilstein 5100's all around. So after d

Jullian is not my name
Jullian is not my name

I just got done with installing my 6112's on my 2014 GMC Sierra Crew Cab.  Reading some install guides on here really helped, along with printing some Chilton Repair guide torque specs that I got from

Posted Images

jgraves13 Enthusiast

jgraves13

Posted
Posted
Purchased my 2014 Sierra 4WD a month ago, was already leveled unknown kit. The oem Ranchos were garbage and worn. I installed the Bilstein B8 5100s after reading this thread. Set at highest setting, removed the lower level and kept the top of strut level piece installed. Upgraded to 2” rear blocks and measures dead level 40.5” all around. Installed the shocks on the rear bolts down with the sticker reading correctly. Rides great and planted. Also put on 285/55/22 Nitto Ridge Grapplers. 
E45AACBD-95D0-4D81-AA86-124EE4C7E300.thumb.jpeg.bee04d3d4121ec273a0b898ee518e1ec.jpeg



I'm scared to see what your CV angles look like. Truck looks good, but I wouldn't leave it like that if you don't want your suspension components wearing out quickly


Sent from my iPhone using Tapatalk
madsen203 Enthusiast

madsen203

Posted
Posted
13 hours ago, amxguy1970 said:

 

Perfect stance? It looks nose high like Cali style trucks. It may measure level but many people on here know that when you do that it doesn't look it...

 

I'd remove the top spacer and just run the Bilstein's at the top setting. This way it retains some rake as a truck should, doesn't look nose high and will wear less on the front end since stacking leveling kits and running that high is never good for the truck. Did you adjust your headlights down after all of this? 

 

Tyler

I think the problem is that the top of the hood near the windshield sits higher than rear of truck which gives it that rear sagging height. That’s why trucks with a tad of rake look better (and level) because the hood angle and height is the same as the bed angle and height. 

 

I agree that 3rd or 4th setting on the 5100’s is probably ideal for ride comfort, level look, and component longevity. 

  • Like 1
mbatzel14 Enthusiast

mbatzel14

Posted
Posted (edited)

Been watching and reading this thread for a VERY long time now.

Finally bit the bullet and ordered everything.

 

2014 Sierra 1500 AT Extended Cab w/ 87k miles

 

Last piece of the puzzle is tires.

I will get everything installed and see what I actually have to work with.

Right now I am thinking 275/65/20's

 

What I ended up getting - 

Camburg UCA's 

6112's in the front

5160's in the rear

5160 mounting brackets

All new mounting hardware

Edited by mbatzel14
  • Like 1
Gearhead1000 Enthusiast

Gearhead1000

Posted
Posted

I have 3000k on the 5100 Bilstein rear shocks. 

First impression is that they are firm and very similar to the procomp ones but seem to be more able to adjust the damping better. I have no dought they will perform well Towing. But next time I will get adjustable ones for the halfton ride that I bought the truck for. Coming down from a 3/4 ton. 

aaronarf Enthusiast

aaronarf

Posted
Posted
On 7/21/2019 at 2:32 AM, Yondu said:

So nobody has swapped from 5100s to 6112s yet? 

I was debating it...also debating unloading my truck for an F150.  :smash:

  • Like 1
slide187 Enthusiast

slide187

Posted
Posted

[emoji2961][emoji2961][emoji2961][emoji2961][emoji2961][emoji2961][emoji2961][emoji2961][emoji2961][emoji2961][emoji2961]


Sent from my iPhone using Tapatalk

peejaykay Enthusiast

peejaykay

Posted
Posted

I'm at 100k miles. Stock suspension all around. Anyone tow heavy (9-10k) and do 6112 and 5160?

 

Also doing the z36 brakes + stainless brake lines at the same time. 

manderson7015 Enthusiast

manderson7015

Posted
Posted
I can verify that the part # you have is correct. I have a 2017 Silverado 1500 High Country with the 6.2L motor. Motor doesn't impact part #. BSN-47-273702 is the 6112 part # for 2014-2018 Silverado 1500's. 
 
Part # for the 5100 series monotube = BSN-33-238319.
 
The 5100 does not come with Coils. I used the part # above for the rear. 
 
Order eibach springs for your 5100's you'll be happy.

Sent from my SM-T580 using Tapatalk

  • Like 1
hirdlej Enthusiast

hirdlej

Posted
Posted

I just received my 4600 bilsteins in the mail today from shock warehouse.  I was surprised that the front ones came in brown boxes.  Is this normal or can someone tell me if they're supposed to come in a different box?  Just seemed a little too "generic" for the packaging.

 

Red_5 Enthusiast

Red_5

Posted
Posted
23 hours ago, peejaykay said:

I'm at 100k miles. Stock suspension all around. Anyone tow heavy (9-10k) and do 6112 and 5160?

 

Also doing the z36 brakes + stainless brake lines at the same time. 

I have a small toy hauler that maxes out at 10k but is more like 8k when I tow it with a car inside - light car. I have the 6112 and 5160s but unfortunately haven't had the chance to install them yet. Hoping to get them on soon. 

 

I have a '15 Sierra 6.2 Max Tow with 42k miles.

Roscopcoletrain Senior Enthusiast

Roscopcoletrain

Posted
Posted (edited)

Anyone have a squeaky Bilstein strut? Ive got a squeak up front, passenger side. if I stand on the running board and rock the truck, squeak squeak squeak. Everything seems tight that I can tell. 

 

 

EDIT...so it was the main top strut nut. Wasnt totally loose, but enough that it would allow movement and the squeak. 


Replaced the sway bar bushing chasing the squeak and managed to snap one of the bolts. YAY

Edited by Roscopcoletrain
madsen203 Enthusiast

madsen203

Posted
Posted
On 7/25/2019 at 8:58 AM, Roscopcoletrain said:

Anyone have a squeaky Bilstein strut? Ive got a squeak up front, passenger side. if I stand on the running board and rock the truck, squeak squeak squeak. Everything seems tight that I can tell. 

 

 

EDIT...so it was the main top strut nut. Wasnt totally loose, but enough that it would allow movement and the squeak. 


Replaced the sway bar bushing chasing the squeak and managed to snap one of the bolts. YAY

I had a squeak like this and it turned out to be a loose antenna. Sorry about your experience. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,881
    Total Members
    8,960
    Most Online
    tararebecca
    Newest Member
    tararebecca
    Joined

  • Who's Online   2 Members, 1 Anonymous, 521 Guests (See full list)

  • Latest Articles

  • Posts

    • tararebecca
      2027 GMC Sierra: Official Discussion

      By tararebecca · Posted

      I agree, simplicity and reliability matter more as vehicles get more complicated. A V8 work truck option with fewer electronic features and a stronger warranty would definitely appeal to a lot of buyers who use their trucks for real work. Customizing it with trusted outfitters is often the best way to get exactly what you need
    • artistemorbidity
      2026 Sierra 1500 Denali - Sound upgrade?

      By artistemorbidity · Posted

      I’ve heard similar complaints from newer vehicles where the factory “premium” systems don’t always live up to expectations. A good installer should be able to improve the sound without turning it into a bass-heavy setup. I’d look into upgrading the front speakers, adding a quality DSP amplifier, and possibly improving sound deadening first—those changes usually make a much bigger difference than just adding a subwoofer. Hopefully someone local can recommend a reputable installer in the Las Vegas/St. George area.
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      Do you remember that Harley Davidson was more successful (solvent) when it produced about 60% of the market demand (by design) and forced wait times of up to three years? Even when your turn came around it was, "Take what we are giving you or move to the back of the line and start over". HUGE markup's were 'normalized' and dealer killed. 40% markup and no floor plan? What's not to love? Greed will kill them yet. They have surplus production and customer base is tanking. And still they think nosebleed pricing will work.  
    • newdude
      Me too……..

      By newdude · Posted

      The engine was done as part of the 6.2 recall?   You'd have to see if your VIN also has the 6.2 engine special coverage on it.  Coverage number is N252494003.  If you have this, your engine is covered under this and NOT the GM replacement part engine warranty which is 3yr/100k from the date of install.  The 3yr/100k mi warranty is in effect for non warranty purchases.     This is not any different if it was replaced under warranty without a recall or special coverage.  So if you had a 5.3 and it popped at 3 years in at 50,000mi during the 5yr/60k powertrain, the replacement engine would not get the 3yr/100k, and instead gets the remainder of the 5yr/60k as coverage.     So N252494003 gives 10 years or 150,000mi of coverage, which ever comes first, starting at the vehicle in service date.  So if your in service date is 01/01/2022, N252494003 gives you special coverage of the engine until 01/01/2032 or 150,000mi, whichever comes first.  So if your start date was 01/01/2022, you'd have left 5 years and 4 months (lets round to august 1st), or 62,000mi left of coverage.   So you need to know your in service date to know how much coverage is left.  
    • CamGTP
      Injector update

      By CamGTP · Posted

      Okiee dokie there bud, way to take things to the extreme.   I guess you missed the whole point and take things way to serious. I installed different EV6 style injectors that just so happen to be larger in my car running the same LQ4 engine and with a better spray pattern than the stock style injectors and I noticed no difference in the idle quality. Kinda was my round about way of saying that even if you put the same size but better style injectors in your truck, you will likely see the same thing.    I'm sure you're great to have conversations with in person if that's how you act through a keyboard. One little things sets you off and now I guess my dick is all up in your face.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...