Jump to content

Recommended Posts

Posted

164 Pages in this thread later and looking for opinions.

 

Looking to replace the shot Z95 Magneride suspension Front & Rear; in my '16 Sierra Denali CrewCab 4x4 6.2L with a 2" lift.  Why does the Bilstein website not have any search results for the 2016?

 

Rancho, Bilstein, other?

Posted
6 hours ago, Sierra Dan said:

Was the $100 charge with the units on the truck? If so that is not bad.

Also, did you get an alignment?

 

Unfortunately, that is with them off the truck. It was an urgent need (timing of the essence) so I sucked it up. Also, Bay Area, California prices are out of this world relative to the rest of the nation usually. 

 

It's done and installed. 

 

I didn't get alignment. I'm debating whether I will. If alignment is $150 at the dealer but new tires are $1200/set. I'd have to expect that I get 25% more life out of my remaining tires to break even on ROI. I'll have to get alignment with new tires as I'll be getting a different tire size the next time I need tires so I'd have to fork up that amount again at that point. I don't foresee getting an additional 25% out of these LS2 tires--nor do I really care to. As it is, I haven't rotated them in the last 13K miles. 

Posted

I got my truck back after installing 5100s all around.  Rides very good to me.  Front shocks are set at full height.  The new shocks seem to soak up the big bumps very well.  I agree with what others have posted about still feeling small road imperfections like expansion joints.  I do not believe the small bumps are any worse than my OEM ranchos with 77,000 miles on them.  I feel like the small bumps are on par or slightly better than the OEM shocks.  I am happy with the 5100s at their price point.

 

I need to snap a few pictures.

Posted
23 hours ago, Sierra Dan said:

Great review. Thanks!

 

Thanks!

Now I have a few pics from the morning I picked her up. Truck needs a bath but that is a constant battle lately with the dust. 

 

8C9E0060-5382-426C-9705-ECB7227F7E6E_zps

 

762BF164-8D21-41F5-8F6F-A8336615FEA5_zps

 

8F0191D4-92A9-425B-B7B2-3AA74D41FF58_zps

 

0A7E4AE1-2303-4C07-98A3-3A098BCD61B4_zps

  • Like 1
Posted
Thanks!
Now I have a few pics from the morning I picked her up. Truck needs a bath but that is a constant battle lately with the dust. 
 
8C9E0060-5382-426C-9705-ECB7227F7E6E_zpstk119mk3.jpg
 
762BF164-8D21-41F5-8F6F-A8336615FEA5_zpsncuocnhh.jpg
 
8F0191D4-92A9-425B-B7B2-3AA74D41FF58_zpsrbmchquw.jpg
 
0A7E4AE1-2303-4C07-98A3-3A098BCD61B4_zpsieobyp76.jpg
Nice!

Sent from my LG-G710 using Tapatalk

Posted
2 hours ago, mbatzel14 said:

Thanks!

Now I have a few pics from the morning I picked her up. Truck needs a bath but that is a constant battle lately with the dust. 

 

8C9E0060-5382-426C-9705-ECB7227F7E6E_zps

 

762BF164-8D21-41F5-8F6F-A8336615FEA5_zps

 

8F0191D4-92A9-425B-B7B2-3AA74D41FF58_zps

 

0A7E4AE1-2303-4C07-98A3-3A098BCD61B4_zps

Looks good! What size tires? 

Posted

Still waiting on my 6112' from Battle Born Offroad. Ordered on 8/6. Was told a few days ago (20th) that they are expected to ship on the 28th. They are a little miss leading with the shipping. The webpage says they have 105 in stock  but please allow two weeks for shipping. Well I'm looking at three weeks and trying not to get frustrated about it. 

Posted
On 8/21/2019 at 4:21 PM, Gixxer188 said:

164 Pages in this thread later and looking for opinions.

 

Looking to replace the shot Z95 Magneride suspension Front & Rear; in my '16 Sierra Denali CrewCab 4x4 6.2L with a 2" lift.  Why does the Bilstein website not have any search results for the 2016?

 

Rancho, Bilstein, other?

Because your truck has magneride. If you put Bilstein's in you will have to get some sensor bypass plugs to avoid error codes.  

 

 

I wouldn't get rid of Magnerides for Bilstein's.  JMO

Posted

Just installed the 6112's on the front and 5100's on the rear. Did the rears myself, got 4wheelparts to do the fronts on the highest setting. Seem pretty good so far! I disagree with some people who say "night and day difference" but they do soak up the big bumps more easily and the truck seems more stable. Truck is still ever so slightly higher in the rear but other than that leveled out.

Posted (edited)
On 8/24/2019 at 1:21 PM, Yondu said:

Because your truck has magneride. If you put Bilstein's in you will have to get some sensor bypass plugs to avoid error codes.  

 

 

I wouldn't get rid of Magnerides for Bilstein's.  JMO

Yes.  The same was true of the wife's Tahoe LTZ which I swapped over to Passive from the Active Z55 with the rear air option.

My question is still the same but let me ref-phase it.  For those have had the Z95 Magneride, and have swapped it from an Active to a Passive suspension setup; What did you go with?

Edited by Gixxer188
Posted
On 8/23/2019 at 10:32 PM, BowHunter1 said:

Still waiting on my 6112' from Battle Born Offroad. Ordered on 8/6. Was told a few days ago (20th) that they are expected to ship on the 28th. They are a little miss leading with the shipping. The webpage says they have 105 in stock  but please allow two weeks for shipping. Well I'm looking at three weeks and trying not to get frustrated about it. 

I was in the same exact position as you with Battle Born Offroad.  I ended up cancelling my order because they kept providing different ETAs each time I got in contact with them.  Very frustrating for sure.

Posted
4 hours ago, Gixxer188 said:

Yes.  The same was true of the wife's Tahoe LTZ which I swapped over to Passive from the Active Z55 with the rear air option.

My question is still the same but let me ref-phase it.  For those have had the Z95 Magneride, and have swapped it from an Active to a Passive suspension setup; What did you go with?

I have a z71 and went with bilstein 5100s. They're better in some ways but a kind of jarring ride, pretty stiff. I run standard load 275/60r20 tires at 32 psi.  I'll be swapping the setup out for 285/70r17 tires in the next few weeks for a better ride and if that doesn't give me what I want, CST coilovers.  I haven't used the CSTs so I can't in good faith recommend them as an improvement yet  They cost considerably more but I'm tired of my stiff ride.  

  • Like 2
Posted
On 8/26/2019 at 1:40 PM, Yondu said:

I have a z71 and went with bilstein 5100s. They're better in some ways but a kind of jarring ride, pretty stiff. I run standard load 275/60r20 tires at 32 psi.  I'll be swapping the setup out for 285/70r17 tires in the next few weeks for a better ride and if that doesn't give me what I want, CST coilovers.  I haven't used the CSTs so I can't in good faith recommend them as an improvement yet  They cost considerably more but I'm tired of my stiff ride.  

It’s true about the trade off. I’ve gotten used to the stiffer ride but overall, the handling has improved. The rear end is more planted and thus I have much less wheel spin/chirping when making a turn from a stop or on an off camber. 

 

Im happy with it but it is definitely more rough riding. I miss the smooth sailing over the tar strip and the like but when I hit a big bump or rough terrain while in a turn, I’m glad to have the 5100’s. 

 

Overall, I’d say it was worth it for what I was seeking. I bought a truck expecting a truck ride. If I wanted the caddy feel, I’d kept it stock. Maybe some progressive shocks vs digressive would be better for those who want a more comfortable, yet compliant ride.  

Posted (edited)
On 8/23/2019 at 7:32 PM, BowHunter1 said:

Still waiting on my 6112' from Battle Born Offroad. Ordered on 8/6. Was told a few days ago (20th) that they are expected to ship on the 28th. They are a little miss leading with the shipping. The webpage says they have 105 in stock  but please allow two weeks for shipping. Well I'm looking at three weeks and trying not to get frustrated about it. 

I ordered mine in the middle of July and have called multiple times. They aren't answering my calls anymore and haven't responded to my email inquiries.  I'm not sure what the note means they added to my order on 8/20. Getting about ready to dispute the charge.

 

image.png.d817f306fa605533082213e51ce2a731.png

Edited by Eneerge

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Okay boys and girls I put a bottle of this in Dizzy the oil burning guineapig after a tank between the coil and plug service of the #3 hole and near the end of the first R&P 5W30 attempt. As a note I did a two R&P oil changes back in October of 2025 with little effect. Granted they were 1K mile a shot oil changes so.... Then followed by fourteen  1K mile changes of Mobil 1 Euro 5W30 FS. Also ineffective.    Anyone who has followed the adventures of Dizzy may remember that to put the oil on the full mark of the published nominal 5 quart change I withhold about a cup of oil. That over the last 50K miles the P0420 light has been a frequent flyer, sometimes three of four a day. And that even on 93 octane fuel she registers some KR even in moderate conditions on favorable days on slight inclines. Lastly when giving her a kick in the pants, something done about once a week, she looks like a diesel with the pump turned up. 😬   After one bottle and over the last 500 miles of a 3K mile OCI, of the first oil change I dropped the nastiest looking oil ever in her history. That's saying something as  you will recall I have used AutoRx, HP EC30/40 and a few other harsh solvents in her before including the GM top soak twice. This was syrup. Black stinky, inky syrup but the filter wasn't all that bad.    On the second fill I had to use the entire 5 quarts to reach the full mark. That was unexpected! The ignition KR is completely gone! Even at 99% engine load. MAP is much lower. Level road is now 9.8 instead of 12.5. Fuel economy is remarkably higher and for the first time since her earliest days she will spin to 6500, more than a thousand higher with out laying down dead. Yes, the coil and plug had something to do with that but remember the first 2500 miles after that repair on the first change it was same ole same ole Dizzy. Seems we have top rings that are somewhat functional again. P0420 code only comes on now if run in town for more than an hour of stop and go. On the open road it goes weeks without a incident. Perhaps it is cleaning the cat on the pass through?  Fuel Trims have improved as well. Nothing not to like.    To early to say about oil economy but the changes to date in the operational aspect is remarkable. I can't think of a worse case than Dizzy.... It's already paid for itself in a few tanks of fuel with the mpg improvement.    @OnTheReel, I'd say if the Jeep didn't respond perhaps there wasn't an issue to respond to.    I've run the Red Line SI-1, AMSOIL fuel cleaner, GUMOUT and Techron all in this SUV without any such results. Color me impressed. I'll be running out my supplies of the list mentioned and moving on to the Valvoline R&P Fuel System Cleaner.     
    • Hey Chuck !!Thanks for the all the info I'm an old fart and I have everything I need for the oil change at home,minus flexibility .... and I’ve been doing my own oil changes for 40 years. I just didn’t want to end up without a crush washer or with the wrong one in my stash and have to walk to the auto parts store, lol. I climbed under the truck to check the location, and man, it’s going to be the easiest oil change and filter swap in the last 40 years—right up there with my 2014 Mitsubishi Outlander 2.4. No mess, nothing to drip on—just perfect. I’ve got one more free oil change to use, and then that’s it with the dealership!
    • I think this subforum was created for the new generation pickup trucks (2027-) with the 3.0 but I don't think it's a big deal either way. There are probably 2027 model-year specific changes for the SUV's too.   I was just curious if you had issues with your 2025 3.0. I'm still under 10k miles on mine and fingers crossed I don't have thrust bearing issues. I'm guessing not, since you're willing to buy another one! It's a good engine minus one or two manufacturing whoopsies.
    • Wife has enough metal in her she hides from the scrapper. 
    • Djannoyed was a one hit wonder. Posted and disappeared. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...