Jump to content

  • Sign up for FREE! Become a GM-Trucks.com Member Today!

    In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. 

2016 Chevrolet Silverado makes public debut - full details released

Zane

By Zane,
in The Newsroom Archive

 Share

Recommended Posts

Knuckle47 Enthusiast

Knuckle47

Posted
Posted (edited)

They just sent me the new car satisfaction survey... in the additional comments section I described this issue and that the dealer would have no knowledge of the problem. The test drive is about 4 miles long and maxes out at 50 mph. I'm waiting to see if they respond to my comment that places the cause directly at the factory tire install line.

 

My rear tires were balanced at a nearby performance tire/wheel shop. Smoothed out very nicely. I'll scream as far as I can to GM but I'm sure they will not respond. In 1996 they denied warranty coverage just 465 miles out of 36,000.

 

Now that I think of that...I should ve bought the Dogde! ;)

Edited by Knuckle47
Link to comment
Share on other sites
  • Replies 30
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Zane
Zane

Zane Merva Executive Editor, GM-Trucks.com 9/24/15   Chevrolet is using the State Fair of Texas to take the final wraps off of the newly refreshed 2016 Silverado. With the public debut also comes

Mcarlo24
Mcarlo24

Yup... Those E-bay light are better IMO... Mainly because of the Day Time Running LED's... The 2016 design is.... Yup, you guessed it.... WEAK!

Knuckle47
Knuckle47

Preston Tucker had the ideas.... Sorry it took so long for the " big 3 " to market them as standard items. HID lighting should have been there years ago. And the front end IS TOO LOW....I see a tie

Posted Images

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

    • 01Silverado2wd
      2001 silverado 1500 5.3L secondary air monitor won’t complete
      By 01Silverado2wd
      hello gm-trucks commuinty i’m having issues with a smog readiness monitor not completing. any information on this issue would be greatly appreciated. my truck is a 2001 Chevy Silverado LS 1500 with a 5.3L v8 and it’s 4x2. all the readiness monitors complete except the secondary air system causing the truck to fail smog in california. i’ve heard the air pump turn on at cold starts and even replaced the passenger side check valve. also replaced the solenoid that sends vacuum. everything in the secondary air system seems to be operating properly but the monitor won’t complete. i’ve driven 100s of miles and done countless cold starts but no luck. even the smog referee said the system is working properly and i should just drive the truck more. anyone else experience this issue and what did you have to do to complete the monitor? there are no codes stored currently and the truck runs fine. thank you to anyone that helps
    • Jgardow92
      Driver's seat leaning to the left?
      By Jgardow92
      I have a 2022 trail boss lt that has about 6100 mile on it now. Bought it brand new in may 2022 and it seems like the drivers seat leans to the left towards the door. Almost feels like Im gonna fall out of it and no matter how I adjust it it seems the same. Visually it looks like it sits level and is fine. Is it possible something is broken inside like the frame? I would assume the frame would have to be sturdy. Is there any place that sell a better bottom cushion?
    • youn1033
      FS '18 Sierra OEM LED Taillights - Custom Painted!
      By youn1033
      or sale are my set of custom painted, OEM Sierra Denali LED Tail Lights. I had these painted to go on my truck and unfortunately they took so long I had to go a different direction before I got them back.. I have since moved up to a 3/4 diesel and am hoping these can find an owner who will appreciate the time, effort, and $$$ that went into creating them!
       
      These OEM LED Tail Lights are selling for $300 - $500 a piece online, and the cost to have these custom painted Mineral Metallic to match the Denali paint + the lens smoked (lightly, not enough to dim them when lit!) was $700 - looking to get $1,000 including shipping. Can cut a better deal if wanting to pick up in person in the Houston, TX area.
       
      Please reach out for additional pictures, questions, etc. I respond much quicker via text (405) 642-9097
       
      Thanks!





    • youn1033
      FS '18 Sierra OEM LED Taillights - Custom Painted!
      By youn1033
      For sale are my set of custom painted, OEM Sierra Denali LED Tail Lights. I had these painted to go on my truck and unfortunately they took so long I had to go a different direction before I got them back.. I have since moved up to a 3/4 diesel and am hoping these can find an owner who will appreciate the time, effort, and $$$ that went into creating them!
       
      These OEM LED Tail Lights are selling for $300 - $500 a piece online, and the cost to have these custom painted Mineral Metallic to match the Denali paint + the lens smoked (lightly, not enough to dim them when lit!) was $700 - looking to get $1,000 including shipping. Can cut a better deal if wanting to pick up in person in the Houston, TX area.
       
      Please reach out for additional pictures, questions, etc. I respond much quicker via text (405) 642-9097
       
      Thanks!





    • Fredo1888
      L84 can I save it ?
      By Fredo1888
      My l84 5.3 cracked some pistons now thinking of doing a light hone but wanted to know if it would even save the engine ? The scratches are pretty light my nail doesn’t get stuck but I do feel em. The pours on the other hand I’m not sure what could have caused those little things ? 


  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    242.1k
    Total Topics
    1.4m
    Total Posts

  • Member Statistics

    309,534
    Total Members
    8,960
    Most Online
    Al Hernandez
    Newest Member
    Al Hernandez
    Joined


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept