Jump to content

Recommended Posts

Posted

My condenser failed earlier this week. Well, it's been cool, so that is when I noticed it. 2014 with 48,000 miles. I called my regular dealer and was quoted $1,300-$1,500 to fix. No help offered from GM for my VIN number. Has anyone contacted a GM Customer Care group for help in the cost? I could replace it myself I imagine, but I'd rather have a pro do it.

  • 3 weeks later...
Posted (edited)

funny i came across this.. .2016 gmc...85k... ac was leaking.. hot air.. fixed 2 leaks, and was told to keep an eye on the condenser.. ..well 1 week later hat just went out.. back to blowing warm~.. FML... 1200 fix~..

Edited by Crstfr
  • 3 weeks later...
Posted
On 4/12/2021 at 2:41 PM, Crstfr said:

funny i came across this.. .2016 gmc...85k... ac was leaking.. hot air.. fixed 2 leaks, and was told to keep an eye on the condenser.. ..well 1 week later hat just went out.. back to blowing warm~.. FML... 1200 fix~..

Damm thats some luck. Hope ya get it sorted out

 

Yotaman

Posted
14 hours ago, Yotaman said:

Damm thats some luck. Hope ya get it sorted out

 

Yotaman

A friend of mine with a 2014 Silverado LT had his condenser go out.
Fortunately, it wasn't the evaporator.
He replaced it, with help, but didn't get the trans fluid line in properly.
The condenser install went well, a shop replaced the lost trans fluid, fixed the connection, and recharged the AC system.
It's been good for the last three months since the replacement.

Posted

Just made an appointment to get my AC fixed (2015 Sierra). AC went at 115K KM, I now have 127K KM. Assuming it's the condenser; is there a part number I should request to ensure I get the 're-engineered' condenser? Alternatively, any aftermarket condensers that are much better quality? I don't want this to happen again. Thanks guys.

  • 3 weeks later...
Posted

When will the cash cow for the dealers ever end? 2014 Sierra with 78K miles - I have had to take my truck in to have the A/C fixed every year for the 3 years for the same issue. Is there not class action lawsuit I can join from California? First it was the faulty AC condenser - that was covered in 2015 trucks, not 2014. Then the pin hole in one of the lines an another $700.  A year later blowing hot air again - took it in and it was the same line they replace year before. Fortunately it was still covered under warranty. This year - blowing hot air again - take it in and they want to charge me to troubleshoot? Really? I complained and got that waived - only this time it is a rear discharge hose that was leaking.  They put dye in it and did see some traces on the firewall near the hose they replaced 2x already and changed it for no charge - another $650. In the last 3 years it has cost me almost $1000 a year for my AC. They could have completely serviced the system the first time for less!

 

Any resources in CA that can help?

 

Looking to trade it in and be done with it, while I stall can and the AC works.

 

Does anyone  know if the same issues have plagued the 2020's and above??

 

First thing they ask me is if I have the extended warranty - but does that not stop after 5 yrs?

 

Sorry to ramble - just need to vent.

 

I do not seeing myself as Dodge or Ford man - I have owned a Toyota Tacoma, but love my GMC trucks.

 

Help in CA.

 

JJ

 

  • 4 weeks later...
Posted (edited)

Full disclosure - I did not read every comment in this almost 40-page thread so I apologize in advance but I'm on break at work right now and don't have that much time.  I did read the first page or so and then the last couple.  Correct me if I'm wrong, but what I gather is:  

 

  • There was a design flaw in the a/c condenser that causes it to develop a leak
  • GM acknowledges that it's a flaw but doesn't replace it for free
  • It can cost up to $1400 at a dealer to get it replaced
  • Some have replaced it themselves but it's a 3-4 hour job (and a person likely needs some certain tools/equipment to properly install and charge it)

 

Did I miss anything?  

 

'15 LT CC Z71 here, 55,600 miles, a/c just stopped cooling properly...does this mean I likely have fallen victim to this, as well?  

 

What's the suggested course of action?  Dealer repair and try to get them to cover the cost? (Tips for this?? Any TSBs or whatever to tell them so they can help cover it?)  Or better to just buy the part and have a local private garage do the install for less than the dealership?  If this, what's the p/n of the updated version that remedies the issue from happening again?  

 

Thanks in advance!  I'm confident several of you in this thread have great knowledge to impart to me on this issue based on your own experience so I'm all ears (well, eyes...).  

Edited by 03msc
  • 2 weeks later...
Posted

OK, well I'll follow-up on this.  Took it to the dealership this past Friday and it was, surprise, the condenser.  I went ahead and let them replace it.  A chunk of change I didn't want to pay but it is what it is.  He quoted me $1,180 but the final bill was $1,160.  With the way things go for me, I figured if I ordered the part myself and tried to put it on myself, it'd either arrive bent and be a long replacement process or I'd break something else in the process.  So, $1,162 poorer but I have ice cold a/c again.  Oh well.  

 

GM should really reimburse the costs or part of the costs for these...

  • Like 1
  • 4 weeks later...
Posted

I'm having ac issues at 63k on a 2016.

Was 8 oz low on fluid( dye added- no leak) this was a week ago now yesterday seamed not very good ac again)

Between my transmission and a slew of other issues I'm tired of my " great trade in swap" I thought I did with my 2007 and want it backatleast the damn air worked and it shifted fine.

I'm really disappointed "again " with my ltz-z71 piece of garbage.

Never again...40k bucket of problems

 

  • Like 1
  • 1 month later...
Posted

Succumbed to the condenser problem myself. 2015 with 72k miles.

 

What brand is everyone DIY'ing this with? Murray from orielly, spectra from autozone, oem dealer and risk it failing again?

Posted

Just did this job on a '16 Sierra. GM can't seem to get ANYTHING right these days. Can't say I'm surprised. I'm still dealing with low bidder junk parts on my '07 Silverado 1500 at 113k miles. Tranny failed at 103k. Rear end at 97k. The clunk that has been there since day 7 has become progressively louder over the years. Something tells me the source is about to reveal itself any day now ... :mad:

 

But back on topic ...

 

Customer wanted cheap, since this thing has been a money pit for him since the day he bought it (Gee, sounds familiar ... shocker!) - he traded it for a Ford (Not that they're any better). Used UAC brand from RockAuto. My opinion? STEER CLEAR! Chinese garbage! Took A LOT of bending and tweaking to get the piece of crap to fit right. I wasn't too happy during this install! 

 

Thankfully the job is done, A/C is ice cold, and this headache has moved on to someone else (Unfortunately for them).

 

The 21st Century automotive industry for ya.

 

spacer.png

 

2545-E202-713-C-4-DBB-8122-4-F5-B68-D5-C
 

 


 

  • Like 1
  • 3 months later...
Posted

Add me, 2016 Serria Denali 60k no ac, but I moved from Maryland to South Carolina and didnt have the time to get it fixed and we made a few trips now have 67k. I bought used at 53k, had the trans flushed and updated at 54k. I'm thinking the dealer patched the Ac to get by. I've been adding refrigerant to get by. Like everyone says, Gm should be 100% responsible, I'm a Hvac tech and refrigerant leaks are a no no period, that's from the EPA. I guess that GM in Government Motors of China now that a known leak is ok and requires no attention, that's BS, because if I have a known leak on a system and I'm caught I'm fined. Well any way, this is crazy. 

  • Like 1
  • Thanks 1
  • Sad 1
Posted

How many has had this fixed under warranty or used the updated part from GM and it has failed again ? Mine is still good but I am afraid the aluminum foil is not really gonna keep it from cracking again.

 

Yotaman

Posted

In my opinion, I'd rather fix it myself than have GM fix it for free using the same crap parts the vehicle came with. That, and the way they're screwing their techs today encourages speed over a quality job.

Posted

One day last month, my wife pulled into the garage from running some errands in her 2016 Tahoe, and mentioned that the AC wasn't cooling. I shined a light through the grill, and could see the oil spot on the condenser where they all fail. The local Chevrolet dealer estimated that it would cost between $1500-1600 for the repair, and the GMC dealer wouldn't give me an estimate.

 

The Tahoe had the extended coverage on the condenser, but it expired in July. I called GM and they said I'd have to take it to a dealer to have it diagnosed before they could talk about giving me some help on the repair.

 

I decided to have an independent shop I trust do the repair, and it cost me $1013. It would have been nice to know beforehand what GM would have done for me on the repair, but I decided to go the independent shop route to avoid what might have turned into a prolonged ordeal.

 

I have the same condenser on my 2015 Sierra, and if (when) it fails, I think I'm going to attempt to replace it myself. I'm fairly comfortable with replacing the condenser, but not so much with charging the system. I've watched quite a few videos, but still have a a few questions. But I'm also not comfortable paying another grand for the repair, so it might be time to learn.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...