Jump to content

Recommended Posts

Posted
8 minutes ago, thundar56007 said:

What size lift  and size tires you got?  and is that a 7ft or 8ft garage door?

7" lift with 35/12.50/20 tires.  Dealer put some cheap mud tires on it.  I'm gonna get as much as I can out of them then go with Nitto and maybe even some all terrains.

Posted
On 6/11/2020 at 9:39 AM, Electrobri said:

Wow that is a shine. Did you put something on that?

Sorry for the lack of responses guys, I've been on vacation. ?️

 

Thanks! I use Adam's Buttery Wax every other wash, I think this was not too long after its last wax. Really recommend it if you don't have a garage for applying wax because you can actually apply it in direct sunlight on a warm day and its still super easy to buff off.  

 

Also, the vehicle parked in the garage was a 2016 Ford Police Interceptor Utility, you can just make out the push bar and silver/white chevrons on the bumper - and now you know my day job.  

  • Like 2
Posted
What size wheels and tires did you put on there? Any lift or leveling kit on it?


ReadyLift SST +2, adds two inches on top of the factory 2”. Total of 4” lift. Atturo Blade XT 305/55-20 (33 x 12.5) on 20 x 9 Moto Metal MO970 wheels with 0 offset.


Sent from my iPhone using Tapatalk Pro
  • Thanks 1
Posted
28 minutes ago, loud_pipes said:

 


ReadyLift SST +2, adds two inches on top of the factory 2”. Total of 4” lift. Atturo Blade XT 305/55-20 (33 x 12.5) on 20 x 9 Moto Metal MO970 wheels with 0 offset.


Sent from my iPhone using Tapatalk Pro

 

I’m trying to figure out exactly what will fit on mine without a lift for now. I’ve looked through so many pages on here with no real concrete answer. Looking at putting on 20x10 -12 but not sure if it’ll rub so may have to go with 20x9 -12 on my Bridgestone duelers for now. Then later upgrading to 275/65-20 terra grapps G2. Eventually I thought about getting the ready lift 1.75 when I upgrade the tires. 

Posted (edited)

Somewhat new to the forum and excited about my new 2020 AT4 Duramax.  So far loving the new truck.  This is my first GM product after owning Toyotas my entire life.  Couldn't be happier and hoping its as dependable as a Toyota.

 

Mods - 

285/75/17 Nitto Trail Grapplers

17x9 Icon Rebels w/ 0 offset

Removed Rear 2" block to level truck

 

Next Mods - 

Gloss Black Paint 

- Grill

- Emblems

- Fog Surrounds

Powder Coat TailPipes Gloss Black

 

IMG_0803.jpeg

Edited by Benzo1
Wrong Tire/Wheel Name - Nitto Ridge Grappler on Icon Rebound
  • Like 7
Posted (edited)

2020 Summit White Elevation

Swapped out the black wheels/tires for a set of 18” AT4s.

Added a leveling kit

Added Katzkin leather

Added spray in bed liner.

 

The only things left I’d like to add are Rough Country HD2 step bars and a black low profile toolbox.

 

I like it clean and simple!

 

6e6a4e3f8a9913213913b3b65f96bcab.jpg

12e27e01d4b3e5c70b8b08bde36cbe42.jpg

e9f65f1f5a7be910e5b587692a8abee2.jpg

7e664343961432e00792f5d03f6ae625.jpg

6c3397d3f9d2974e3332717e95e44bb1.jpg

 

 

Sent from my iPad using Tapatalk

Edited by maconmatt
minor formatting edit
  • Like 9
Posted
22 hours ago, Benzo1 said:

This is my first GM product after owning Toyotas my entire life.  Couldn't be happier and hoping its as dependable as a Toyota.

?

Posted

7ecdf9c98dc81a96a0c3c19e773b1ca0.jpg

My high country and a friends AT4 at a baseball tourney


Ryan B.

  • Like 3
Posted

Just my opinion,  but just didn't care for the the grill and over all huge  front end of the GMC is why I went Chevy

  • Like 1
Posted

Hello, been following the forum for awhile but this is my first post. Bought a new 2019 GMC Sierra Elevation 6 months ago. 8000km so far, love this truck. Wondering how everyone’s 3m vinyl on emblems is holding up, i used a buddies cheap wrap and the edges all peeled up within a day or so. Want to order better stuff if the small lip on the letters is holding the 3m vinyl. 

- RC 2 inch upper strut level

- 25% tint on front windows

- Truxedo LoPro cover

Need better photos yet, lots more mods to do. 

 

7A5B6ECF-8EEE-4172-BA63-EA4CFD013D34.jpeg

DB971534-B019-438E-84E1-10A15276446D.jpeg

  • Like 2
Posted
On 6/20/2020 at 1:45 PM, RyanbabZ71 said:

7ecdf9c98dc81a96a0c3c19e773b1ca0.jpg

My high country and a friends AT4 at a baseball tourney


Ryan B.

I like your matching set :)

Here's mine:


image.thumb.png.d9af1a685ec2769cf74dd42654546c12.png
 

  • Like 4
Posted
On 6/20/2020 at 9:46 AM, Cpl_Punishment said:

?

I thought all Canadians were born as friendly people ?

Posted
40 minutes ago, NDoG said:

I like your matching set :)

Here's mine:


image.thumb.png.d9af1a685ec2769cf74dd42654546c12.png
 

Great looking Camaro!!!!

  • Like 1
Posted
On 6/4/2020 at 8:30 PM, ausomecasey said:

Nice! You get the tri or quad fold? Let us know how you like the cover...

I’ve had the cover on for a few weeks now and live it. Had a few small leaks in the corners but weather stripping helped. I’ll never buy another soft bedcover again. 4738000F-BDB2-414D-9789-BA8B8B6F9973.thumb.jpeg.089a6fe96bb27259ffa37543ae010a1c.jpeg

Posted
10 hours ago, JimCost2014 said:

I thought all Canadians were born as friendly people ?

I got tired of being the only nice guy around. 

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...