Jump to content

Recommended Posts

Posted
On 11/14/2018 at 7:31 AM, Demon said:

Just a heads up to all the other 2019 owners out there.  Last night I noticed water on the top on the back seat on the passenger side and my rear window is leaking.  It looks to be coming from the area around the sliding window rail.  I spoke with the dealership last night and will be dropping it off today for them to fix.  I'm not really pissed off about it because this is the kind of stuff that happens when you buy the first model year of a new design but I just wanted to give you guys a heads up on something to look out for.

Just happened to mine. Have to take it in 😭

Posted

Somebody fill me in on where we are with this. Do these windows still leak into the late 2021/ 2022 models??? Had a 2020 built in July 2020. It had a slight leak. I added TrimLok weather seal tubing to the spoiler gap and never had an issue after that. Truck got totaled. 2022 is being delivered next week. Wondering if I need to do the same on this truck.

  • Thanks 1
Posted

I done the same Trimlock tubing on my 2020 and I've been in some hellish storms going thru Texas and not one drop found it's way in.

  • Like 1
  • 3 weeks later...
Posted (edited)

Following @Kclyatt’s lead. Just put two tubes of windshield sealant into the top of the window between the spoiler and the window. Contemplating getting another. 
 

Next will be to seal up the gap between the spoiler and the cab using the weatherstrip he recommended from Lowes:

https://www.lowes.com/pd/M-D-10-ft-x-19-32-in-Black-Auto-and-Marine-Seal-Rubber-Marine-Automotive-Weatherstrip/1038917

 

After that will be a sealing of the brake light. Still researching that part. 

Edited by AJMBLAZER
What’s a wondow?
Posted
23 minutes ago, Thomas Sampson said:

Leaking back window in 2021 Chevy Silverado. Dealer says it’s not covered and 250 to fix!!!!

Sounds like you need to go to a different dealer

  • Thanks 1
Posted
1 hour ago, Thomas Sampson said:

Leaking back window in 2021 Chevy Silverado. Dealer says it’s not covered and 250 to fix!!!!

 

That would only be true if you have more than 36K miles!

Posted
49 minutes ago, Steve-2019 said:

 

That would only be true if you have more than 36K miles!

And if you are out of warranty, then I would look for someone to do the repair that’s detailed in the sticky thread in this forum.  If you can’t DIY, then paying someone to do the repair that will work would be better money spent.

 

 

Posted (edited)

Hi everyone, 

I’m having the same issue as everyone else. I already replace my sliding window with a solid one and I’m still having the same  water leak. Any one has an idea what else could it be? I’m passed my 36000 and bumper to bumper does not cover it. 

Edited by Stallion_08
Posted

I have a 2019 Chevy also. It has been at dealership 4 times because of my back glass leaking. Replaced glass twice. Then other three times just tried to seal they said. Well it’s back again now what is the correct way to handle this situation. 

Posted
2 hours ago, Stallion_08 said:

Hi everyone, 

I’m having the same issue as everyone else. I already replace my sliding window with a solid one and I’m still having the same  water leak. Any one has an idea what else could it be? I’m passed my 36000 and bumper to bumper does not cover it. 

Wel….I hate hearing this. I’m bringing mine in Monday to put in the solid glass. 

Posted

Alright gentlemen, I found the leak. It wasn’t the solid rear window. The dealership did not fastened the nut completely and the weather strip was damaged. the water was going through the hole that has the yellow guide on the spoiler. The round gasket was ripped so I bought a new from advance. 
It did stop the leak but let’s see for how long. I ordered the weather strip from lowes  and I’ll replace the damage one as soon I arrives. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   2 Members, 0 Anonymous, 268 Guests (See full list)


  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...