Jump to content

Recommended Posts

Posted (edited)
On 7/15/2019 at 7:29 PM, Trailboss75 said:

 

 

 

On 7/15/2019 at 7:29 PM, Trailboss75 said:

1” motofab lift

fuel vandal 20x9 +1

Ridge Grappler 305/55R20

Bracket mod behind mud flap, no rub.

B4917F7E-0D69-448B-9439-40A01746325F.jpeg

ok, i have to know. You're on a sandy loam dirt road and there's not a spec of dirt even on the surface tread of your tires??????

Edited by Okievision
  • Like 2
  • Haha 1
Posted
7 hours ago, Okievision said:

 

ok, i have to know. You're on a sandy loam dirt road and there's not a spec of dirt even on the surface tread of your tires??????

Haha, too funny!  So I washed the truck, then drove it about 1/2 mile down this dirt road and took some pics, then drove back home ?.  It’s basically hard dirt, it leads to a state forest near me. 

  • Haha 1
Posted (edited)

17" Method MR 312s. 35/12.5/17 KO2s, Baja Kits Chase Kit Suspension (Front King coilovers w/remote reservoirs, boxed upper control arms, rear Kings w/remotes, 1" lift rear) . No rubbing.

 

 

20190829_180152.jpg

Edited by foxcoupefan
  • Like 5
Posted (edited)
3 hours ago, foxcoupefan said:

17" Method MR 312s. 35/12.5/17 KO2s, Baja Kits Chase Kit Suspension (Front King coilovers w/remote reservoirs, boxed upper control arms, rear Kings w/remotes, 1" lift rear) . No rubbing.

 

 

20190829_180152.jpg

Great looking truck. Do you have a link to this kit by chance?

 

What height are you running your coilovers? If max, do you have a diff drop? Sorry for the question parade... lol super interested in this setup.

Edited by jordanl010
Posted

Black Rhino Kelso 20x9 +12 offset

3mm hub centric spacers front only 

305/55 BFG KO2

1.5” motofab level kit

No rubbing at full lock

9006D5F8-61FA-4D17-BF90-1BD4AFF36133.jpeg

  • Like 5
Posted (edited)

Looks great. Just curious.  When folks are going with 305s and aftermarket wheels, why not do a 20x10 wheel?  Wouldnt you need less backspacing then?  If seen several 305s on aftermarkets and they are all 9" wheels.

Edited by Ezekiel2517
Posted
Black Rhino Kelso 20x9 +12 offset
3mm hub centric spacers front only 
305/55 BFG KO2
1.5” motofab level kit
No rubbing at full lock
9006D5F8-61FA-4D17-BF90-1BD4AFF36133.thumb.jpeg.dd7830e924e6fadbb5c4aef86f18dbef.jpeg


How big of spacer?
  • Like 1
Posted
13 hours ago, brianc636 said:

 


How big of spacer?

 

3mm just a bit under 1/8”

Posted

GMC AT4 plus 2 in level
Tis 544bm 20x10-25
Open country RT 285x60x20= 33.6x11.46
Amp steps Denali front grill

Rubs bad......

Last picture is where I had to cut the metal. Next I will take out the support for the inner fender that holds the carpet.d3ff9f10471b6d9366ff0046db4e2324.jpg6026723fce81710e80cde4680357cc25.jpgd0609c0e2a58a8f58cba4ee1fa4c69f5.jpgb80dc0f48d4840a3204ef87faf508679.jpg88eaf1c977c18b11356882b825fc10c0.jpg

Sent from my SM-G965U using Tapatalk

  • Like 1
Posted
14 hours ago, Ezekiel2517 said:

Looks great. Just curious.  When folks are going with 305s and aftermarket wheels, why not do a 20x10 wheel?  Wouldnt you need less backspacing then?  If seen several 305s on aftermarkets and they are all 9" wheels.

I chose 9” because I didn’t need any wider to fit 305s or if I decide to go up to 35x12.5 they’re still big enough. 

I was trying to find the balance between wider tires/wheels and not having the tires/wheels protruding from the side of the truck.  Just want a cleaner look. 

Posted

Thanks.  Seems like 10 may be overkill.  Lots of variations i see between folks rubbing or not.  Most of the rub seems to be on the mudflaps which would seem to be an outside rear tire edge rub.  This would lend itself to a tire that sticks out to far.  Gothp28 showed a -25 offset and bad rub. Most folks seems to be doing better here with almost no offset on 9" wheels. The folks with +1 seem to be okay.  But I know there are a lot more variables to consider

Posted

Oh yeah.

 

My baby has new feet and shoes.

 

Nitto Terra Grappler G2; 285/55R22

 

34" rolling size. Perfect fit on this lifted truck.

 

Slight rub on full lock. ab9e91ababb3a19cf78b62a5df8702d2.jpgd053ffe42fdb61dc4e9608fa7893f31c.jpg

 

Sent from my SM-N960U using Tapatalk

 

 

 

 

  • Like 4
Posted
2 hours ago, Smoothbassman said:

Oh yeah.

 

My baby has new feet and shoes.

 

Nitto Terra Grappler G2; 285/55R22

 

34" rolling size. Perfect fit on this lifted truck.

 

Slight rub on full lock. ab9e91ababb3a19cf78b62a5df8702d2.jpgd053ffe42fdb61dc4e9608fa7893f31c.jpg

 

Sent from my SM-N960U using Tapatalk

 

 

 

 

Great tire and size, I’m very happy that I went with that same tire on mine as well. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Lake Speed is drumming up business for his company just by being in the spot-light so he has a vested interest in stoking the 0W-20 fire.  IMO  
    • I knew when I bought my truck that it had off road hill decent or craw control or whatever they call it and rolled my eyes at that but it gets throw on with other options my truck has, I just never had a heads up if the highway speed regular cruise setting had anything to do with the brakes and that took me by surprise. If you've ever been to the top of Pikes Peak and watched those ahead of you on the way down with their brake lights on constantly, one can guess they are probably not gearing down or not enough anyway if their vehicle will allow and a good reason their is a brake check spot part way down where they use an infra red heat gun to check how hot ones brakes are front and rear.    Your right that once one gets out of the front range by Denver and I've not been on that stretch of 285 between Denver and Fairplay myself but I know its high and Fairplay at 10000 feet, Buena Vista at 8000, it drops a bit from there but then your going back up and over the 11000 pass and Durango is at 6500 . So yes your definitely right that 6500 and a lot higher is the theme of going anywhere out in that direction from Denver but hey, the down hill sections give fantastic fuel mileage !.    I don't even look at the fuel pumps for what premium costs here, since I live on a farm and up to this point get fuel delivered I am rarely in front of a fuel pump and when I am, I am often using card lock bulk fuel stations so it tells me what the price is AFTER I buy the fuel. Looking up on gas buddy and converting to US gallons but in Canadian dollars, regular on average of the prices listed was around 5.95 and premium is around 7.00 . That was one reason I did not go for the 6.2 half ton aside from its lack of carrying/towing if one was going by the rule of using premium fuel and until recently one could only buy regular farm gas if playing the few cents off game for farm dyed fuel for a "farm licensed pickup". But yes I hear you on the fuel price difference and like the diesel theme with it often being more expensive then gas it doesn't have quite the charm to it either as it once did although right now here for some reason the price of diesel has come down more so its now inline with the price of regular gas. 
    • I agree with this assessment. As you know I’m testing longevity with vehicles for the first time. I have a few vehicles I passed to kids and grandkids. We’re all past 100K miles some approaching 170K. I’m the only one doing 5k oil changes. The rest whatever the minder says. I’m the only one doing frequent transmission service. My odyssey the trip vehicle at 200K will be finished as a trip vehicle. I recently changed to high mileage oil, Valvoline. I can’t get past the fact that all manufacturers want to claim long service life. I just don’t make sense that they would go with low weight oil for mileage. While sacrificing longevity.
    • There's absolutely a mountain of profit in catering to the "I do my own research" crowd, people who are certain they know better. And I don't mean there isn't data to support that 0w40 produces less wear product than 0w20 in an engine like the 3.0 Duramax, that only feeds them the assurance they need. Again, my whole thing with oil selection is, sure, 0w40 or 0w30 produces less wear product. Are we talking the difference between the engine lasting only 100k versus 200k? Or are we talking more like, if the engine will already go 350k on a good 0w20 regimen recommended by the OE, is using 0w40 going to get us to 355k, assuming we can even get the rest of the truck to last that long, meanwhile sacrificing the first 5y, 100k in powertrain warranty. The answer isn't easy, there are tradeoffs.   I willfully use 0w20 Dexos D for this reason, knowing that a 0w40 will produce slightly less wear. I don't believe the delta in wear product is meaningful over the lifetime of the engine, and I place much more importance on driving style and overall feeding and care of the engine as a whole. It's the mentality that someone can abstain from alcohol their whole life which is an amazing boost to health by itself, theoretically. But if they're sedentary, that lifestyle choice will most likely kill them young despite their other, concerted efforts. Maybe someone doesn't drink AND they are the perfect picture of health and activity AND they use 0w40 AND they treat their engine perfectly. If living until 130 years is the goal, sure, do that. But it's going to be a really old truck falling apart around a good engine for that last 30 years, without a doubt.   I watched Demonworks' other video on the 100k+ 3.0 Duramax that had dealer 0w20 changes on what appears to be OLM-prescribed intervals (8-10k).   The QR codes are still present and readable on the main bearings. That's how little wear it has.   That's not proof that anyone else should stick to 0w20, but it's confirmation, for me, that 0w20 is perfectly acceptable to use in these engines.
    • 1Based on independent testing of OE 0W-20 in the Peugeot TU3M Wear Test as required by the dexos1 Gen 2 specification.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...