Jump to content

Recommended Posts

Posted

Moto Metal 20x9 +01 mm offset (part number MO80629068300)

sumitomo encounter AT 275.60.20

gm tpms sensors 13533166

these wheels need a hub centric ring 78.1 to 106.1

 

20220628_123300.thumb.jpg.b287c2765e4ac7211ad6f87153e79f89.jpg

20220628_200245.thumb.jpg.9deadeca633d88b410801ff60103f090.jpg

  • Like 1
  • 2 weeks later...
Posted (edited)

Finally got the rear blocks in

The rear blocks are from the previous generation trucks (they are ~1.2" and I milled them down to 1").New U bolts from a 2018 are perfect length.  Top pics it without the blocks , bottom with. IMG_7423.thumb.jpg.3b6ae1f2e95798495441e15f7c03fd2b.jpg

IMG_7650.jpg

Edited by pepe48134
  • Like 1
Posted

Nothing too fancy, have a set of Z71 Tahoe 20" rims I swapped from the 20" black elevation package. Both had the 275 Trailrunners. I just added 2" factory lift and probably going to level 1" off the front. Will likely go a little more aggressive down the road but still enjoying my gas mileage so no need to change right this second20220707_183932.thumb.jpg.420a2b35f6001781a9f18efc3f08818e.jpg.  

Posted
On 7/7/2022 at 4:48 PM, pepe48134 said:

Finally got the rear blocks in

The rear blocks are from the previous generation trucks (they are ~1.2" and I milled them down to 1").New U bolts from a 2018 are perfect length.  Top pics it without the blocks , bottom with. IMG_7423.thumb.jpg.3b6ae1f2e95798495441e15f7c03fd2b.jpg

IMG_7650.jpg


Looks great. Have you measured the fender heights? I think you’re right about the taller tire looking better. 

Posted
On 6/22/2022 at 11:47 PM, Hickory said:

Recently picked up my new ‘22 AT4 and swapped out the Duratrac’s for 295/70R18 Ridge Grapplers. Kept the stock setup and surprisingly have no rubbing even at full lock. 

 

spacer.png

 

How does the road noise of the Ridge Grapplers compare to the stock Duratracs?  I'm thinking about getting the same tire for my 2021 AT4.

Posted (edited)
On 7/14/2022 at 9:24 AM, Jethro71 said:

How does the road noise of the Ridge Grapplers compare to the stock Duratracs?  I'm thinking about getting the same tire for my 2021 AT4.


I’d definitely recommend them. They’ve been extremely quiet, so far. I drive with my stereo off quite a bit because I’ve got a 3 year old that wants to talk to me non-stop and I’ve never noticed them in the silence and have zero issues hearing my kid from the back when he’s talking. They’ve easily surpassed my expectations for such a rugged looking tire. 
 

 

Edited by Hickory
Posted
22 hours ago, Hickory said:


I’d definitely recommend them. They’ve been extremely quiet, so far. I drive with my stereo off quite a bit because I’ve got a 3 year old that wants to talk to me non-stop and I’ve never noticed them in the silence and have zero issues hearing my kid from the back when he’s talking. They’ve easily surpassed my expectations for such a rugged looking tire. 
 

 

Thanks.  That is very helpful.  My 8 year old is the exact same way.

Posted (edited)

275/70R18 Nitto Ridge Grapplers on stock wheels.  Bilstein 5100s on all 4 corners.

 

IMG-1041.thumb.jpg.3668bf3a7563c9b226a5f7637a762528.jpgIMG-1038.thumb.jpg.c2259829b05534f2bad2bded859278c0.jpg

Edited by GearheadSS
  • Like 2
Posted

I have a '20 rst z71 Silverado with the 20 inch stock wheels and goodyear tires. After having trouble the last couple weeks in the rain--28k miles and normal tire wear for the mileage, they don't seem to stick in hardly any rain situation now. When I initially bought the truck 2 years ago, I was going to get black wheels later on.. I just never got around to that. Since I'm DONE with these tires(plus I've got nail holes in 2 of them that don't seem to leak), I thought I might as well look for wheels too.

 

I'm looking for a black wheel the same size as the stock 20s that came on it.. I don't want to have to get everything recalibrated to a new wheel or tire size. I like the way the trail boss wheels are, but they're 18s. I'm not doing a lift or level or anything, just want black wheels that wont' have to have any spacers or anything. Hopefully something that isn't weak or too heavy.

 

I've never got after market wheels before and don't exactly know where to start looking, and how about to get the tire pressure monitoring sensors put in the new wheels(would i have to buy those separate or would they move my old ones to the new wheels.)

Posted (edited)

33.1" Pizza Cutters (33x10)

Black Rhino Chase 0 offset 17x8.5 (25 lbs ea)

Falken Wildpeak AT3w 255 80r17 Load range E (52.5 lbs ea)

 

These stick out 0.7" further than the stock 20's(33x11) and there's additional 1.5" clearance on inside edge of tire. There's also 1.5" more sidewall. Ride/acceleration/etc. feels same as stock 20's. Actual wheel weight turned out 74.25 lbs which is exactly 4 lbs lighter than 20" factory set up. Both set ups measured 32 1/4" tall while on the truck. And if I could have found Black Rhino Rapid wheels I would be 2 lbs less than that per corner, they rate at 23 lbs, so those looking for performance you're welcome, would be hard to find lighter than those Rapids. Tread width measures 8".

 

image.png.deb537ee95e345ea33d31ba2fa68e320.pngimage.png.b7adb83dc22bdd36108b4ad9ec9810a3.pngimage.png.a4d244018bc26cb092ac2ec44acf9d39.pngimage.png.9c633a5198d3f2ae667cb70732612871.pngimage.png.dcc5a57229dbfcfd9ca3c7049da07b82.png

Edited by 4banger
  • Like 1
Posted
On 7/21/2022 at 4:13 PM, GearheadSS said:

275/70R18 Nitto Ridge Grapplers on stock wheels.  Bilstein 5100s on all 4 corners.

 

 

 

Looks good! I am thinking of going this route. Do you think the size difference is too much to use the stock spare tire, if needed? 

Posted
On 7/18/2022 at 12:07 AM, Hickory said:


I’d definitely recommend them. They’ve been extremely quiet, so far. I drive with my stereo off quite a bit because I’ve got a 3 year old that wants to talk to me non-stop and I’ve never noticed them in the silence and have zero issues hearing my kid from the back when he’s talking. They’ve easily surpassed my expectations for such a rugged looking tire. 
 

 

spacer.png

  • Like 1
  • Haha 2
  • 2 weeks later...
Posted

'22 shorty WT, 2.7L, 4WD with 22" High Country wheels.

 

Stock 17":

 

silverado_stock.thumb.jpg.75b57bac713fd4a5dcb39805f73aacf5.jpg

 

High Country 22" wheels/tires:

 

silverado_22_1.thumb.jpg.7afb88580d46c50e8d2dffbffc1f7b0e.jpgsilverado_22_2.thumb.jpg.cdd8f4411857210d22ce435d0daa0212.jpg

  • Like 3
  • 5 weeks later...
Posted

No photos to share, mine is still stock but, for those who have installed taller than stock tires - up to 35" - how has it affected overall drivability, shifting at highway speed, etc.?  I had 35's on an older model Silverado and at 65-75mph on the interstate, it had issues staying in top gear. Just curious to hear real-world experiences. TIA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,716
    Total Members
    8,960
    Most Online
    BDS my HD
    Newest Member
    BDS my HD
    Joined
  • Who's Online   0 Members, 0 Anonymous, 573 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Hello hello looking forward to expanding my knowledge of the 2026 2500 HD that I just bought.   Truck has 3500 miles on it four-wheel-drive crew cab and I’m about to put a 6 1/2 inch BDS lift on it 18 x 10 -25 offset with 37’s   Already have the wheels and tires just waiting on the lift install in about three weeks   Question what surprises am I not gonna be happy with?  I’m not new to lifted trucks so I know that acceleration towing gas mileage all that is affected..   Question is those of you that have this truck this powertrain with a 10 speed Allison and have done the mods that I’m doing,,, how bad is it? Is that Allison constantly gonna be hunting for the right gear to go into? And what about towing, acceleration, fuel consumption as mentioned?    Lastly how come I can’t find any ring pinion gear set up for these axles and when could I expect to see them?   I apologize if there’s any typos I’m doing speech to text on my iPhone.    
    • I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • How about them NICKS!!! 
    • Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...