Jump to content

led lights to replace park sensor

russell45

By russell45
in Modifications & Accessories

 Share

Recommended Posts

russell45 Enthusiast

russell45

Posted
Posted

okay you guys i know this might sound odd but i am trying to find some led lights to replace the park sensors on my new bumper. the reason is it is a bumper replacement bumper and it is only made with the holes pre-drilled and my pickup is NOT equipped with the park sensor feature. i have looked every where trying to find the size of the holes so that i can kinda narrow down my search but i am not having any luck. i am hope maybe yall have some knowledge to lend me.

 

 

thank you in advanced!!

CustomChevyGuy Enthusiast

CustomChevyGuy

Posted
Posted

I'm not sure what you're going for (purpose of the lights) but i think it's a really interesting idea.. I was looking at this thread here a while ago, and I'm thinking maybe these bolt led lights might fill that hole pretty well.  

 

 

I'm thinking these might be rather easy to use, once you find the size and color you're looking for.

Screenshot_20161014-191544.png

 

Please keep us posted and let us know how it turns out. 

 

russell45 Enthusiast

russell45

Posted
  • Author
Posted

I am going to look into those. My main reason really is to fill the holes for the sensors without using a rubber plug. Looking for maybe amber or just white for the front and red for the back 

  • Like 1
CustomChevyGuy Enthusiast

CustomChevyGuy

Posted
Posted

I would imagine you could get pretty trick with them, depending on how much time you want to invest in it. You could have the outer one on either side, front (amber) and back (red) tapped into the turn signals.

Then middle ones in the rear could be tapped into the brake lights (red). The front middle ones you could use white, and have them on tapped from the headlights, or on an independent switch. 

 

It all depends on how much time and imagination you want to invest.

russell45 Enthusiast

russell45

Posted
  • Author
Posted

Thanks for the idea!! I didn’t even think about tapping into the turn signal !! Thank you! I will keep you up dated on this! 

BlackPaw Colorado New Member

BlackPaw Colorado

Posted
Posted
On 12/10/2019 at 4:15 PM, russell45 said:

okay you guys i know this might sound odd but i am trying to find some led lights to replace the park sensors on my new bumper. the reason is it is a bumper replacement bumper and it is only made with the holes pre-drilled and my pickup is NOT equipped with the park sensor feature. i have looked every where trying to find the size of the holes so that i can kinda narrow down my search but i am not having any luck. i am hope maybe yall have some knowledge to lend me.

 

 

thank you in advanced!!

24D1CA92-3AAB-4EF7-A1F0-9F8E60398F6D.jpeg

russell45 Enthusiast

russell45

Posted
  • Author
Posted

I am not sure. I need to measure the holes for the sensor but my pickup is in the shop right now... 

russell45 Enthusiast

russell45

Posted
  • Author
Posted

Okay, so I went and measured the holes for the rear bumper. They are 1”. So would it be best to find an led light that the housing is 1” or pretty close and has threads and a nut for the back and the head of the light be a little bigger than 1”? What do y’all think? 

CustomChevyGuy Enthusiast

CustomChevyGuy

Posted
Posted
13 hours ago, Mtnsackett said:

Here is another option that is duel function and there is a chrome ring to hide any rubber.

https://www.bigrigchromeshop.com/led-mini-dual-function-clearance-marker-with-bezel-p-12277.html

37969Cover.jpg

I think these might be the way to go! Size would work, and you could always paint the chrome rings if you're going painted bumper.

russell45 Enthusiast

russell45

Posted
  • Author
Posted

Yeah but what holds it in place? The body of the light which is 3/4” is what goes into the hole which is 1“.  So how does it stay in place? That outer ring just keeps it from falling all the way through. It won’t keep in secured. Correct? 

CustomChevyGuy Enthusiast

CustomChevyGuy

Posted
Posted (edited)
47 minutes ago, russell45 said:

Yeah but what holds it in place? The body of the light which is 3/4” is what goes into the hole which is 1“.  So how does it stay in place? That outer ring just keeps it from falling all the way through. It won’t keep in secured. Correct? 

You know what, you are correct. I hadn't noticed till you asked, but those lights don't have the locking nut behind them to hold them in place. That's my mistake. What you would need is something like these, which have a threaded back, so you would be able to tighten it against the back side of the bumper.

 

https://www.amazon.com/gp/product/B07CMN6FD5/ref=ox_sc_saved_title_7?smid=AQU08BEB4MN2K&psc=1
 

These look a little bit larger

https://www.amazon.com/dp/B07CWQZ212/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B07CWQZ212&pd_rd_w=lelbM&pf_rd_p=45a72588-80f7-4414-9851-786f6c16d42b&pd_rd_wg=9TmC9&pf_rd_r=TEFM1K3KC8J7P5GCRASP&pd_rd_r=21117b32-a1e3-456a-95e8-2e60bbb7809f&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEySkRMTEwyUkMxTThMJmVuY3J5cHRlZElkPUEwMDQ4MzAyMTMwSExJQTQ3Vlg2RiZlbmNyeXB0ZWRBZElkPUEwMjk3MDg5MjZQNk5DWktDSllMTyZ3aWRnZXROYW1lPXNwX2RldGFpbCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

 

 

 

Edited by CustomChevyGuy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • diyer2
      Towing In Loose Gravel

      By diyer2 · Posted

      I had a boat for many years, never had a problem even with a 2 wheel drive 93 Silvy for 20 years. Good tires, proper use of the gas pedal worked.
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      I read through that and I won't lie, my eyes rolled at some of the quirks about how it can turn off the trailer braking for example but I can see how it could help control or even up the torque applied to the ground with each wheel in a boat ramp scenario. But of course what it can't do is increase the torque to the wheels if the need is there as it ends up being like driving the four wheel drive version of a two wheel drive ( high range that is ). So far the neighbor that ended up with the 3.0 duramax with the max tow package which meant the 3.73 gears and high range only, I think its been doing ok for what he has been towing but doubt he ventures off into the soft stuff with his holiday trailer. He may have towed his dads river boat locally with it ( he always used his 6.6 duramax before ), I'll have to ask him sometime if he got into a lack of power to the wheels situation as after all that engine produces a lot of torque at low speed once the turbo winds out a bit and I think it has the 10 speed and if so they have a pretty good first gear ratio at 4.70 I see which is vastly better than the 3 or four speed overdrive models of years ago. 
    • diyer2
      OCI, not when but why?

      By diyer2 · Posted

      I did shorter OCI"s for many years without an issue, fights sludge and wear IMO. Recently started using Amsoil, will not do the recommended/advertised miles between changes. 
    • tigers2007
      Oil Fill Tube

      By tigers2007 · Posted

      GM Part Number???
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      It definitely seems quite evident that emissions and fuel economy targets rule above the best case scenario of what the engines best health and life could be otherwise. Items like DI and turbo DI engines with their LSPI issues as well as cats being reduced in life if the proper levels of certain additives were allowed to be utilized and so something has to be compromised and as you point out that is the engine protection from sludge, acid and wear which isn't in the manufactures best interest regardless to worry about in this race to profits from higher sales and so if the engines wear out sooner the next sale is closer at hand.    I am hearing that its likely the two new 2027 GM half ton truck engines will call for a 0W-30 oil, now if that is an existing oil I would have to think so but we will see in the coming months. Sadly as you've pointed out to me, over the last number of years the push has been on to reduce the actual operating temperature viscosity within each designated viscosity grade so that 11.5 to 12 range for a 30 weight for example is more in that just above 10 range at 100c along with that temporary viscosity sheer dropping it even further down as per that "energy conserving" designation, not to mention how some oils are not as sheer stable as would be ideal and that mixed with a long OCI paints a picture with a little too much glitter shall we say !.    All that and the warranty gods scaring the vehicle owner into sticking with that watery wine or risk loosing their warranty coverage if they go and use an oil that is of a higher viscosity even if it meets the emissions and LSPI requirements and would never damage the engine but may very well allow for an engines longer life depending on engine use scenarios ... high ambient temps, towing etc that push oils to their limits.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...