Jump to content

2500 vs 3500 need quick answer!

crazydog
 Share

Recommended Posts

crazydog Enthusiast

crazydog

Posted
Posted

With all of GM's supply issues, my new 2500 still has no build date and will be missing some features.  I have just been offered an existing 3500 instead, which has all of the features I wanted except for the 5th wheel package which the dealer can install.  So ..  do I go with the 3500? Really reluctant to go bigger as I was actually considering a 1500 this time .. and worried about classificiations ===you know, when the government decides to make you safety and when they don't, lol.  Seems like the weight difference isn't much, but .. .wait for the 2500?  or go with this one?

brclark82 Enthusiast

brclark82

Posted
Posted

Previous generations this was more of an issue as they capped the gvwr at 10k for the 2500 up until ‘20. Since then they are both well over 10k gvrw so I doubt there would be much difference, escpecially of you don’t already know because of certain regulations that you need to adhere to.  I actually had the opposite problem, I wanted a 3500 becuase they are more capable for essentially the same money with no drawbacks but all I could find was a 2500.  I would do it

 

ssowie Enthusiast

ssowie

Posted
Posted

The only real difference is the 3500 has an extra leaf spring. I believe the brakes are bigger too. Get the 3500.


Sent from my iPad using Tapatalk

newdude Senior Enthusiast

newdude

Posted
Posted

Extra leafs, higher GVWR, 12 inch axle on diesel.  

 

Otherwise everything else is the same srw 2500 vs srw 3500.  Engine, trans, brakes, etc.  

Billh913 Enthusiast

Billh913

Posted
Posted

I ordered a 2500 Denali with the 5th wheel package. I preferred a factory install since it'll come sealed and undercoated.  I've had a dealer installed 5th wheel and comparing them both really like the factory install.  I'd wait for the 2500 for this and the ride as others have commented.

CRApex Enthusiast

CRApex

Posted
Posted

I've had both already.  Zero difference in ride between the 2500 and 3500.  (I have the 3500 now).  

gearheadesw Senior Enthusiast

gearheadesw

Posted
Posted

I think I would go with the 3500, you can always haul lighter, but you can’t haul heavier. As soon as you start looking at trailers......

  • Like 1
Keith_Schumaker Enthusiast

Keith_Schumaker

Posted
Posted

+1 on going with the 3500.  Depending on the state you can register both a 2500 and 3500 as 10k to stay under the limit so you don't need a dot number if you run it for your business.  

Billh913 Enthusiast

Billh913

Posted
Posted

I rated my 2500 at 10k GVWR to allow me to pull a 16K trailer without a CDW license. 

Njmurvin Enthusiast

Njmurvin

Posted
Posted
On 3/8/2021 at 9:44 AM, gearheadesw said:

I think I would go with the 3500, you can always haul lighter, but you can’t haul heavier. As soon as you start looking at trailers......

^^^ What he said!!!

doverarjim Senior Enthusiast

doverarjim

Posted
Posted

I would stay away from the factory hitch, that is the only thing I'm not happy with on my truck.  The goose ball is loose in the hitch and now it will not unlock and come out of the hitch.  Should have put a B & W in it and thrown the factory one in the trash!!!  Just my $0.02  your experience may vary!

:jester:

Billh913 Enthusiast

Billh913

Posted
Posted

I use the B&W goose ball (TruckProUSA B&W GNXA2061) and it works great.  This is with the factory hitch.

Dunn Senior Enthusiast

Dunn

Posted
Posted

better to have more than enough than not enough.......all things being equal with just an added spring in leaf i would go for 3500

 

if there was a serious ride or money issues maybe not.....but they are basically same in every way cept for more capability and they have it right now.....i would think a 3500 for anyone who tows and needs a HD.....they are such different trucks than a 1500

bones30 Enthusiast

bones30

Posted
Posted

My vote is 3500. See too many people maxing or almost maxing out payload on 2500. I wouldn’t go 2500 anymore. 1500 or 3500. 
Your money though and you spending a lot of it so make sure you are happy with your choice. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      OIL CONSUMPTION

      By Chuck FB · Posted

      First off pay close attention to what Newdude pasted as he is a GM tech !.    I have a couple of questions which might cross off some questions others on this forum would be wondering about as well. So when was the engine oil changed prior to this trip, was it almost brand new oil or did it already have a fair bit of use on it before you started the trip.   Did you check the oil level on flat ground and was it at the full mark just before leaving on this trip which I gather from google map is about 700 miles or so. Why I ask and this is not the first time in history that has happened, that either a dealer or some other shop changed the oil on the vehicle and the vehicle left the shop and the owner ( you ) assumed the engine oil was full but in reality the person who changed the oil simply did not put enough oil into the engine .. it happens !. Also that a shop put the wrong viscosity oil in and an engine was not happy with that thinner viscosity and oil got past the rings at a higher rate than the proper viscosity. Not to mention if there was any leaking out of a drain plug or the filter gasket etc. 
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      You could, although in the end it really doesn't make much difference what comes out in exact terms since it comes down to putting enough back in so that there is enough volume so that something flows back out once the trans is up to temp for the check procedure. I presume your putting a pan on that has a drain plug but its probably the same pan mold/size as at least a while back no extra volume pan was made for the gas truck version due to the exhaust cross over pipe issue. All I can say as per volume I put back in and this was based on changing out the filter as some is trapped in it that does not come out until its removed because of the way its made inside and my truck had sat over night with the trans having been hot when shut down and dripping internally before I pulled the pan. I went off of what the trans shop suggested as a minimum volume he found worked which was 9 1/2 quarts and I had enough flow out of the stand pipe that I knew I was right on the money once it slowed to a dribble and never wasted hardly any oil but it would be totally fine to throw in a full 10 quarts too. I guess personally I wouldn't ruin a perfectly good pan by drilling a hole in it, not with the cost of replacement pans up here or the dorman one anyway with the drain was 500.00 when I priced one out a while back, totally stupid.    I might not have said before but this trans oil type really expands with heat and I think its been said on this forum and the trans shop said the same so I wanted to try and hit the lower temp of the range vs at the top or go shooting above it as that would allow more oil to flow out which wouldn't be ideal. 
    • bruceb58
      Correct way to service 2024 l8t allison trans?

      By bruceb58 · Posted

      Since I am going to be replacing the pan, I am just going to drill a hole in the original to drain it so I will be able to catch the fluid easier and measure how much I took out.
    • bruceb58
      Installed Bilstein 5100's on my 2024 2500HD - Worth it - VIDEO + GIVEAWAY Inside

      By bruceb58 · Posted

      I checked...Amazon is better.
    • bruceb58
      Installed Bilstein 5100's on my 2024 2500HD - Worth it - VIDEO + GIVEAWAY Inside

      By bruceb58 · Posted

      For the front...yes.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...