Jump to content

Recommended Posts

Posted (edited)

Hi everyone. I have a 2000 Suburban I just bought a couple months ago. I got a couple of check engine codes I've been working through, but I'm stuck on these last three.

 

I have the following current codes: P0175 (System Too Rich Bank 2), P0420 (Catalyst System Efficiency Below Threshold Bank 1), and P0430 (Catalyst System Efficiency Below Threshold Bank 1).

 

I had codes for knock sensors as well, but got them replaced, and only these three codes remain.

 

I took temperatures at the exhaust ports on the manifolds on both sides. Bank 2 was significantly hotter than bank 1. By more than 100F-150F.

 

I took temperatures at the inlet and outlet of both cats. Sometimes the outlet was hotter, sometimes it wasn't. I have a cheap Walmart infrared so I take all temp readings with a grain of salt however. Outlet temps were within 100F of the inlets.

 

I also took readings of the o2 sensor voltages for upstream and downstream for both banks. The upstreams appeared fine but the downstreams were pretty inconsistent. Sometimes staying pretty flat near 0.03v, other times they'd spike. They did this regardless of being at idle, or revving the engine at 2000rpm in park.

 

I'm slightly confused at the information I gathered today, I'm trying to determine what road to go down. I'm good at working on things, not so much diagnosing. I plan on replacing both downstream o2 sensors with new ACDelco's to start, and that should tell me if the cats are bad if the codes come back, if my thinking is correct.

 

But I'm most confused about how one bank of cylinders could be running rich, but the other isn't? Shouldn't all fuel injectors be getting the same amount fuel, at the same pressure? Everything I've found online says if I have P0175, I should also have P0172.

Edited by Ryan Woodcock
Can't rev the engine and idle at the same time
Posted

Welcome to GMT.  What is the mileage on the truck?  When was the last time the plugs were changed along with the fuel filter?

 

O2 sensors don't go bad often but they can.  Does the truck burn oil?  That could have poisoned the CATS over time. 

Posted
3 minutes ago, Black02Silverado said:

What is the mileage on the truck?  When was the last time the plugs were changed along with the fuel filter?

 

Does the truck burn oil?

 

225,502mi at the moment. Plugs were changed at a shop a month or two before I bought the truck according to Carfax. Changed the fuel filter two weeks ago. Not sure if it burns oil, but it definitely leaks it onto the exhaust pipe and burns it away.

Posted
3 minutes ago, Ryan Woodcock said:

 

225,502mi at the moment. Plugs were changed at a shop a month or two before I bought the truck according to Carfax. Changed the fuel filter two weeks ago. Not sure if it burns oil, but it definitely leaks it onto the exhaust pipe and burns it away.

To me for what new O2 sensors cost and the mileage it wouldn't hurt to change them.  One other thing to look at and it might not be related but check your fuel pressure at the fuel rail.  You can get a test gauge at Auto Zone, Advance Auto to use from their loan a tool program.  See what pressure you are getting.

Posted
59 minutes ago, Black02Silverado said:

check your fuel pressure at the fuel rail.

Will do. I'll report back what I get. I'll check it on cold start and hot start.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...