Jump to content

Center console to radio harness

Rich Cordova

By Rich Cordova
in Modifications, Wheels & Tires

 Share

Recommended Posts

Rich Cordova Enthusiast

Rich Cordova

Posted
Posted

Does anyone have access to GM harness schematics? Trying to find the correct harness that goes from the center console to the dash (infotainment system). Installed the center console with storage, cigarette lighters and USB ports and would like to use the factory harness without having to cut and splice. Or does anyone have access to just the plug and I can add my own pins?

20210915_143535.jpg

20210916_155110.jpg

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

flat350
flat350

On my 19  the center console USB ports on the rear are powered from the harness under the pass. seat, the electronics inside the console are powered from the USB port on the dash with an extension har

Posted Images

Transient Senior Enthusiast

Transient

Posted
Posted (edited)

This will open a can of worms.  There's over half a dozen numbers, some old numbers that direct to new numbers.  What is needed to help you is to know exactly what you have, and what you're looking for.  The harness you're looking for info on is part of the harness that connects to everything in the center console, including rear seat USB and the key fob reader in the center of the front cup holders.  To get you the right info we will need to know if you have rear heated seats, wireless phone charging, and center console SD card port.

 

Btw, I recently upgraded to wireless phone charging.  My truck had the harness with no rear heated seats, no wireless phone charging, and yes to SD card reader in center console.  If this is what you're looking for, not only could I answer your questions with pics, but I could also sell you the harness. 

Edited by Transient
edurnil New Member

edurnil

Posted
Posted

I'm very interested in the harness you are speaking of. Can you send pics and the cost?

 

flat350 Enthusiast

flat350

Posted
Posted

On my 19  the center console USB ports on the rear are powered from the harness under the pass. seat, the electronics inside the console are powered from the USB port on the dash with an extension harness, USB port on the dash needs to be swapped to a different one for the ext. harness to plug into it.

  • Like 1
Rich Cordova Enthusiast

Rich Cordova

Posted
  • Author
Posted

So my truck is a 2020 work truck, no power anything accept for the locks and windows.  7" infotainment code IOR, on the dash below the radio it has a USB and a type c USB(which has the dual mini USB ports on the back and a plug with 3 wires). I installed a center console from an older silverado that has the storage compartment and the arm rest storage compartment, it has a cig lighter on the rear near the floor and one in the arm rest along with a dual USB and headphone(aux in). I also purchased the USB port that has a USB/USB C AND SD card slot on the front and a mini USB and power plug on the back, which I want to install in place of the dual USB/aux in in the arm rest location.

Rich Cordova Enthusiast

Rich Cordova

Posted
  • Author
Posted
15 hours ago, flat350 said:

On my 19  the center console USB ports on the rear are powered from the harness under the pass. seat, the electronics inside the console are powered from the USB port on the dash with an extension harness, USB port on the dash needs to be swapped to a different one for the ext. harness to plug into it.

Mine does have the dual mini USB ports on the back which I ran the other port to the other USB module along with power. Doing that shutdown the USB input along with the Bluetooth module. It all stopped working until I disconnected the battery from the truck and let it reset(about 20 min). I put it back to factory and it worked again. Haven't had time to mess with it in a few days....

  • 1 month later...
huy8000 Enthusiast

huy8000

Posted
Posted

I have a 2021 Elevation 2WD. and dont have any ports in my center console. Would like to add data ports. Thinking I can somehow splice into the ones up front and make a harness for it for a clean install. Does anyone have information on how I can do this? I want to do it and plug in the usb wireless carplay for a clean look. I know the OEM GM Part number for the console ports is 13529862. I dont know the connector that connects into it. 

huy8000 Enthusiast

huy8000

Posted
Posted

I have a 2021 Elevation 2WD. and dont have any ports in my center console. Would like to add data ports. Thinking I can somehow splice into the ones up front and make a harness for it for a clean install. Does anyone have information on how I can do this? I want to do it and plug in the usb wireless carplay for a clean look. I know the OEM GM Part number for the console ports is 13529862. I dont know the connector that connects into it. 

huy8000 Enthusiast

huy8000

Posted
Posted
On 9/23/2021 at 8:48 AM, flat350 said:

On my 19  the center console USB ports on the rear are powered from the harness under the pass. seat, the electronics inside the console are powered from the USB port on the dash with an extension harness, USB port on the dash needs to be swapped to a different one for the ext. harness to plug into it.

Do you know the new port numbers and the part number for the harness ext? Trying to add data ports to my center console. 

  • 1 month later...
rick08 Enthusiast

rick08

Posted
Posted

I have a ‘19 Sierra that I added a centre console to from a ‘19 AT4 that had wireless charging and rear seat heat. I harness from the dash to the wireless charging didn’t come with the console so I’m trying to figure out if I get that harness (dash to wireless charging) will that also connect to make the console usb’s work.

Transient Senior Enthusiast

Transient

Posted
Posted
On 12/28/2021 at 12:45 PM, rick08 said:

I have a ‘19 Sierra that I added a centre console to from a ‘19 AT4 that had wireless charging and rear seat heat. I harness from the dash to the wireless charging didn’t come with the console so I’m trying to figure out if I get that harness (dash to wireless charging) will that also connect to make the console usb’s work.

Console USBs and wireless charging aren't the same harness.  It doesn't go up into the dash.  There is 1 connection where it does connect to a cable going up into the dash, and that's a mini sd plug, iirc the terminology correctly, to connect the SD card/usb/auxiliary ports that are in the armrest bin of the center console.  The harness is also kind of like a Y formation, where the bottom of the Y is a large plug the connects under the passenger seat.  One branch of the Y ends with the wireless charging and the other branch ends with the rear USB/rear seat heat buttons.   

rick08 Enthusiast

rick08

Posted
Posted

I have a ‘19 Sierra that I added a centre console to from a ‘19 AT4 that had wireless charging and rear seat heat. I harness from the dash to the wireless charging didn’t come with the console so I’m trying to figure out if I get that harness (dash to wireless charging) will that also connect to make the console usb’s work.

rick08 Enthusiast

rick08

Posted
Posted

Thanks for the reply!

the console I put in has the wireless charging and rear seat heat. It didn’t come with a harness that connected to the dash.

My jump seat had usb out the back and those work on the new console. My centre stack has the 2 usb’s and the card reader. I want to change that to just 2 usb’s and then what ever harness is required to make the connection to the the console usb, aux port and card reader. Is it possible I have the micro connector you speak of?

thanks, I appreciate your time 

 

 

Transient Senior Enthusiast

Transient

Posted
Posted
21 hours ago, rick08 said:

Thanks for the reply!

the console I put in has the wireless charging and rear seat heat. It didn’t come with a harness that connected to the dash.

My jump seat had usb out the back and those work on the new console. My centre stack has the 2 usb’s and the card reader. I want to change that to just 2 usb’s and then what ever harness is required to make the connection to the the console usb, aux port and card reader. Is it possible I have the micro connector you speak of?

thanks, I appreciate your time 

 

 

I don't know if you can swap that to 2 USBs.  The harness that connects the USB/Aux in the center console is the same one that gives you wireless charging and rear heat.  To swap it you might need to modify the wire harness to accept your change.  I really don't know without looking at the actual pieces. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • bwiese
      seat base height *lowering* (base 40/20/40 seat, 2026 1500 WT std cab)

      By bwiese · Posted

      Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • bwiese
      on-wheel cellphone control: 2026 1500 WT (2.7L 4WD std cab)

      By bwiese · Posted

      I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...