Jump to content

Recommended Posts

Posted

Mine was built in November. Just bought Range V8 to shut off the AFM. Will keep you posted when I plug it in.

Received my Range 8 To disable the AFM. Man it makes a difference. No bells no whistles no warning lights. Works great and well worth the money. I was told it voids the warranty. I tell them, so does running the noisy POS into a tree. This way nobody gets hurt. I now have my truck back and not a wussy wagon.

Posted (edited)

I have 5.3 w/ 3.42 with 1100 miles on it and have never felt any unuasual vibs. could that be anything?

I spend 1hr a day on highway at 70-85.

Edited by scoobyd3w
Posted
I have 5.3 w/ 3.42 with 1100 miles on it and have never felt any unuasual vibs. could that be anything?

I spend 1hr a day on highway at 70-85.

 

Never felt any vibrations? Yeah I'd call that being one of the lucky ones.

 

Sent from my HTC One using Tapatalk

 

 

Posted

Idk what to do my dealer says they can't feel the vibration but its still clearly there Sent from my HTC One using Tapatalk

tell them to use the vibration tool they are supposed to have. it does not matter if they feel it or not. tell them to use their tools or find a dealer who has a service department with experience using the tool.

Posted

 

Idk what to do my dealer says they can't feel the vibration but its still clearly there Sent from my HTC One using Tapatalk

 

 

tell them to use the vibration tool they are supposed to have. it does not matter if they feel it or not. tell them to use their tools or find a dealer who has a service department with experience using the tool.

 

They put it on the tool the other day. Came back with 3 number 1 vibrations. Kept saying its a tire idk

 

Sent from my HTC One using Tapatalk

 

 

Posted

I do know for a fact they have a new tool and it was held up over being developed and the software refined for frequencies involved in the Silverado line. GM replaced my truck because of delays in calibration, however it is my understanding that dealers should have these new tools now. I do not know if all dealers bought the new tool and calibrations but I do know it is out there. May also ask your dealer if they looked at the shear mounts on the cab - my neighbor had a random vibration and it turned out to be the shear mount was not assembled correctly.

Posted

So the dealer shops have a new driveline vibration diagnostic tool. Does this help them determine the corrective action necessary? Or does it just indicate a vibration issue?

 

Posted

From what the GM Engineer told me the tool indicates a frequency, they then take the frequencies they record and depending on the vehicle they have a guide to correct what those frequencies indicate. More or less it locates it and then they have a repair procedure to resolve it. My dealer had already ordered the new tool last fall but the tool was delayed and was awaiting final calibration from GM for the Silverado. My understanding however is the Engineers have the tool and some dealerships are receiving them. When my truck was diagnosed the time frame was undetermined but I have heard dealers are receiving them now.

Posted
From what the GM Engineer told me the tool indicates a frequency, they then take the frequencies they record and depending on the vehicle they have a guide to correct what those frequencies indicate. More or less it locates it and then they have a repair procedure to resolve it. My dealer had already ordered the new tool last fall but the tool was delayed and was awaiting final calibration from GM for the Silverado. My understanding however is the Engineers have the tool and some dealerships are receiving them. When my truck was diagnosed the time frame was undetermined but I have heard dealers are receiving them now.

 

I think my readings were around 20 hertz?? I could b wrong I'll check the papers out later once I get home

 

Sent from my HTC One using Tapatalk

 

 

Posted

I was right sheet says tire 1 20 hertz Sent from my HTC One using Tapatalk

Had 1 in the 14 hertz range Sent from my HTC One using Tapatalk

Posted

After properly inflating my tires (new one was at 20, rest were high 20's), the replaced tire seems to be helping quite a bit. It isnt perfect but it is much, much better. It is the Goodyears, gdad is spot on. Get the Michelins, I am holding out until they replace mine. I still get the weird little shimmies at odd speeds but nothing I cant live with compared to what I experienced.

 

I finally sense some hope.

Posted (edited)

After properly inflating my tires (new one was at 20, rest were high 20's), the replaced tire seems to be helping quite a bit. It isnt perfect but it is much, much better. It is the Goodyears, gdad is spot on. Get the Michelins, I am holding out until they replace mine. I still get the weird little shimmies at odd speeds but nothing I cant live with compared to what I experienced.

 

I finally sense some hope.

Mine had a tire road force over 40 and was replaced. My error was I only asked the dealer to check the rear tires and not the front as well at that time BC the vib was obviously in the rear. I almost had no vibes at all but after my first service, there's a vib again in the rear after the tire rotation. I have the LS2 20'S. I took it to the dealer and they went for a ride w me yesterday and now have an appt for a new tire again. Edited by 20Bowtie14
Posted

After properly inflating my tires (new one was at 20, rest were high 20's), the replaced tire seems to be helping quite a bit. It isnt perfect but it is much, much better. It is the Goodyears, gdad is spot on. Get the Michelins, I am holding out until they replace mine. I still get the weird little shimmies at odd speeds but nothing I cant live with compared to what I experienced.

 

I finally sense some hope.

I feel that GM will just do a recall on the Good Years to put Michelins on. Expensive fix but better than pissing off loyal customers.

Posted

GM put 4 Michelins on my truck and I still have the vibration. Talked to the service manager and he says they no other fix right now. Still researching with GM. He also told me they were told to not use Michelins anymore. They are supposed to use continental now.

Posted

I find it amazing that GM has not officially admitted the vibration is an engineering fault, and come up with a solution given the growing chorus of owners of brand new trucks that have the symptoms. I have followed this post from the beginning, and feel strongly this is NOT a tire or wheel balancing issue...those issues only further exposé what is clearly a fault in the construction of the truck and or the systems the truck employs to reach the stated mpg, or noise reduction goals. This is a harmonic vibration which gets further exposed by any slightly out of round or out of balance tire. I too am dealing with the vibration, felt mostly from 72-80mph, or exactly the speed range for highway cruising. I have had not one but two road force balances with no sucess. Now that GM is in the headlines daily for the way they handled their ignition recalls, those of us experiencing this vibration issue, with no success from most dealers, or any official word from GM that it even exists, should consider pooling our collective opinions in a more official way and present them to GM publicly, and see if they respond. Otherwise, the Internet ( outside of this forum) is a powerful tool. Either way just posting my opinion, and suggesting given GM's current position they would be unwise to ignore a group of very unhappy owners of brad new trucks who have a collective voice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
    • Just don't turn the steering wheel as much?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...