Jump to content

Recommended Posts

Posted

Hey guys, I just bought a 2015 Sierra Z-71 double cab, and I should have looked at this forum prior to buying it. I get pretty bad vibrations in the seats, center console, floor and pedals at 68mph or above. It's harmonical, so it's bad then it's not bad for like 1500ft, then back to horrible. I've contacted my dealer about having the tires road force balanced, but it doesn't seem like that is fixing the issue. I have the 5.3l with the 6 speed transmission, and it came with the 22" wheels and Bridgestone AT Tires. I haven't marked the tires to see if they're slipping, but something is definitely going on, and it's really discouraging. It doesn't seem like anyone has definitively had the issue fixed from the couple pages of what I've read here, and I have to say, my truck is near un-driveable on the highway at this point, it's so irritating. I noticed that the truck has a lot of rake, and it looks like most of them come like that, also the vibration almost feels like a bad u-joint, but if the u-joint was bad it would be doing it while driving around town and probably making noise as well. Just trying to brain storm, I'm at a loss for what it could be - my Tundra never had issues like this and until it gets fixed I guess I'll kind of be missing that truck.

 

Has anyone had any luck getting it fixed, besides the guy that had his whole rear-end worked a couple pages back?

 

 

Sent from my iPhone using Tapatalk

I had the 70+ vibrations with the 22" Bridgestone Dueler A/T's and after a rebalance,(Not a Road Force Balance) and a tire rotation I have been OK for 1000 mile plus... I still follow this thread because I am concerned when I need to rotate the tires again... Good Luck to all of you still having issues...

 

Sincerely,

Dan

  • Like 1
Posted

I had the 70+ vibrations with the 22" Bridgestone Dueler A/T's and after a rebalance,(Not a Road Force Balance) and a tire rotation I have been OK for 1000 mile plus... I still follow this thread because I am concerned when I need to rotate the tires again... Good Luck to all of you still having issues...

 

Sincerely,

Dan

That's somewhat encouraging, thanks!

Posted (edited)

My vibes were good after visit 3 and who knows how many tires and RFB. Yesterday i got new Cooper ATP 275/65 18 and a slight but not as bad as the initial GY SRAs. Will hit a discount tire w a Hunter and get it ironed out asap

Edited by afireinside7444
Posted

So I dropped my truck off last night at the dealer - I've had it exactly one week as of Monday. While I was there, I made sure to take the service guy for a ride to show him what I was talking about, and make sure that he acknowledged it was not supposed to be like that. While talking to him, he brought up the whole V4 shudder, and I knew it wasn't that - I didn't want to give him a reason to write it off, so I just told him I didn't think V4 mode was the problem, and took him up on the interstate. Sure enough, we hit about 73mph, and it started shaking pretty bad in the seats, floor, center console etc. He looked puzzled and agreed the truck should not be riding like that. He further stated that he was confident it was a tire issue due to the fact that it doesn't happen during low speeds, during take-off, or during deceleration. I don't really buy that, but I just agreed and was happy he was seeing the same issue as I was. So.. they have my truck, I have a loaner with the 4.3 V6, and my loaner does not have the vibe - albeit, the loaner is a nutless pig, that sounds like a Honda with a fart can, at least it doesnt vibrate up the highway. So I guess I'll wait to see what they say, and when I pick it up, I'm going to make them go for a ride with me again so we can verify the vibration is gone. I'm not all that hopeful in some senses, but, fingers crossed...

Posted

On our first 1500 Silverado they replaced ours and it did make a slight difference but did not solve the problem. We went through the BBB process and ended up settling on a 2015 Sierra and they've just replaced the shaft on this one as well. We'll be filing again with the BBB again shortly. Sorry - but for us and our two trucks the shaft didn't fix it.

Posted

On our first 1500 Silverado they replaced ours and it did make a slight difference but did not solve the problem. We went through the BBB process and ended up settling on a 2015 Sierra and they've just replaced the shaft on this one as well. We'll be filing again with the BBB again shortly. Sorry - but for us and our two trucks the shaft didn't fix it.

Well my situation is no different. Just got the truck back today and it still vibrates. I asked the mechanic what he thought after driving it and he said it felt better. I asked him how far he drove it and he said a couple of miles. I took it 10 miles down the expressway and it shook as if nothing had changed from when I dropped it off. Called a different dealer 35 miles away from where I live and they are very aware of the problem and are willing to check it out tomorrow. This will be the fourth and last time for repair. After this, if not fixed I am going for the buyback.
  • Like 1
Posted

Well my situation is no different. Just got the truck back today and it still vibrates. I asked the mechanic what he thought after driving it and he said it felt better. I asked him how far he drove it and he said a couple of miles. I took it 10 miles down the expressway and it shook as if nothing had changed from when I dropped it off. Called a different dealer 35 miles away from where I live and they are very aware of the problem and are willing to check it out tomorrow. This will be the fourth and last time for repair. After this, if not fixed I am going for the buyback.

Good luck !
  • Like 1
Posted

By no means am I mechanically inclined. I've read a lot of the threads that have been posted about this topic. I noticed that a lot of the vehicles mentioned in this thread, that are experiencing this problem seem to be the: Sierras, and Silverado's...if im not mistaken.

 

My question is: As anyone seen a posting about the Denali's experiencing this problem. I drive a 15, Sierra Denali, CCSB, 5.3L, 4x4. Im knocking on wood, But I have not experienced this problem. Obviously I have the Magnetic ride, so Im assuming there are certain aspects of my suspension that differ from the aforementioned vehicles. I was just thinking about this as i was driving my daughter to school. I have only gotten my vehicle up to around 65ish close to 70, and have not felt anything. I have 7500 miles so far. Just thought I'd ask, I truly hope GM comes clean and does the right thing for all of those affected by this issue. I know I would be livid.

Posted

Drive 75 - 80 to see ......thats when mine does it

Thanks brother

 

Sent from my SG Note 4 on Tapatalk

Posted (edited)

By no means am I mechanically inclined. I've read a lot of the threads that have been posted about this topic. I noticed that a lot of the vehicles mentioned in this thread, that are experiencing this problem seem to be the: Sierras, and Silverado's...if im not mistaken.

 

My question is: As anyone seen a posting about the Denali's experiencing this problem. I drive a 15, Sierra Denali, CCSB, 5.3L, 4x4. Im knocking on wood, But I have not experienced this problem. Obviously I have the Magnetic ride, so Im assuming there are certain aspects of my suspension that differ from the aforementioned vehicles. I was just thinking about this as i was driving my daughter to school. I have only gotten my vehicle up to around 65ish close to 70, and have not felt anything. I have 7500 miles so far. Just thought I'd ask, I truly hope GM comes clean and does the right thing for all of those affected by this issue. I know I would be livid.

jpmiami and ANDIE have Denali's with the vibration issues. I just went through my list of people who want to partner up for a lawsuit. I found those 2 in my first page

Edited by Jesse D
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Question @diyer2 on this line if you please. Are you saying the shudder is the system turning on and off at the frequency of the shudder? Guess I'm asking if you are saying you have seen it do this with the bi-direction scan tool in graph mode? If so have you been able to discern the 'trigger'. Something is telling to cycle rapidly.    My truck just started doing this recently. 197K on the clock. My response has been M5 anything under 55 mph. I treat it like a lugging stick shift. Gear down and let it spin a bit. Engauge M5, then tow mode and then M6 lets the trans stay in 5th but the AFM is active. Smooth like Skippy.    My thought was that as a machine ages the friction gets lower and as the system is load based, the lower friction would allow it to turn on at ever lower rpm until it reaches the lugging point. And yes I am ignorant of any minimum rpm requirement for the system. If you know that would be useful information.    As you know I run a Scan-Gauge II which allows me to watch the On/Off of the signal to the VLOM. While in the shudder mode I'm not seeing is cycle at that frequency or at all for that matter outside the triggers @newdude posted a few years back. Now is it possible that the refresh rate isn't fast enough to catch it? Maybe. It is why I asked my first question about graphing and trigging parameter.     As we have observed from members here the failure point is all over the map miles wise as you note yourself in your opening post. That by itself begs a few questions like fellows that comment on these lifters failing even after the system has been disabled. Long after. 😬   https://www.enginelabs.com/news/tech-tips-replacing-ls-active-fuel-management-lifters-with-melling/   The Gen5 lifters operate the same as the LS versions. In fact they are the same lifter.    https://www.enginelabs.com/tech-stories/sorting-out-gen-v-lt-lifter-failure-with-a-simple-valvetrain-fix/        
    • UPDATE 2: Steering wheel control backlights and control of the cluster can supposedly be achieved by adding a wire to pin 20 of the cluster and tapping it to pin 2 of the main clock spring harness. I'm going to give it a shot - will update  
    • GM Global A pickups 2019-2022 can do OTA programming for the radio.  GM VIP (GM Global B) can do OTAs for almost every module on board.  So a 2022.5 and newer pickup can do OTAs for recalls like the 2.7 fuel flow recall.  EVs get OTAs that improve one pedal driving, radio issues, HVAC issues, updated battery management software, etc.     So age of the vehicle/what GM electrical platform its on will alter what amount of updates can be pushed on OTAs.  
    • Thank You.   So far my new ride is making me look like a genius for going with the 3.0L, as my first fuel refill occurred over three weeks from when I took delivery.  This engine combination is very amazing.  So far no issues and had not done a regen yet.
    • I am curious as to how much fluid you put back in the transmission ( assuming you had replaced the filter to compare to my findings ) and then went through the process of warming up the trans before pulling the check plug to drain out the excess and if you measured how much came back out.    I just found it surprising that some claimed a certain amount less fluid being put in and then draining some back out. The attitude of the truck as per if the surface is level and how the trucks stance is would make quite a difference since the check plug is right at the front of the transmission. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...