Jump to content

What have you done to your K2 today?

block8head

By block8head
in Modifications & Accessories

 Share

Recommended Posts

Donstar Senior Enthusiast

Donstar

Posted
Posted
1 hour ago, michigan2500hd said:

That is a stock size, 255/70/17 , however the truck came with 275/55/20 so they look kinda small to me now. Especially considering I had installed 275/60/20's that were 33.1" tall. 

I'll go to another 33 on these wheels ( 17") and probably keep a stock 265/65/18 on my 18" wheels for trips, winter ,etc. I'm loving my mileage now though. It's rate if I'm empty to get under 20 mpg. Even with a 6.2. 

The more I drove with the smaller tires the more I like them. I had a shake with the 20's so I traded for 17's for more side wall and almost 40# lighter per wheel/ tire. 

My '00 Silverado came stock with 235 width tires, my '09 came with 245 and my '15 came with 255's.  I tried heavier, larger tires on my last truck and the improved look wasn't worth the sluggish feel and poorer gas mileage.  In 2000 upgrading to 255's on 17's would have looked awesome.  I'm simply enjoying large wheels by earlier standards!

  • Replies 23.1k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

RKeeper1
RKeeper1

Hauled this precious cargo home for the first time from the NICU after 40 days!   Sent from my SM-N900V using Tapatalk

Mileguru
Mileguru

I installed this thingy on the top of my 2017 6.2L. Not really sure what it does, but my truck goes really fast now.  

pgamboa
pgamboa

Found an hour of free time yesterday and installed GM - Illuminated Door Sills. Love the way they look! Of course, made a how to video. The box didn't come with instructions and tried searching he

Posted Images

CKrado Enthusiast

CKrado

Posted
Posted
On 5/28/2018 at 12:22 PM, Deadpoollane said:

Hook up led plate lights and reverse lights.

Got my dash cam hooked upc04214cdfb0b7557c25dc4ee688bcec9.jpg

Have a bunch of red Silverado logos so tried one on the front really hard to make it look straight because of the slight decline/incline
b2db24e50b8a88946d40515b5cfe9634.jpg


Sent from my iPhone using Tapatalk

Is that the rexing v1 dash cam? If so how do you like it? Thinking about buying one while its on sale on Amazon

Deadpoollane Enthusiast

Deadpoollane

Posted
Posted
Is that the rexing v1 dash cam? If so how do you like it? Thinking about buying one while its on sale on Amazon

Nope it’s the $40 one on amazon


Sent from my iPhone using Tapatalk
Haigami New Member

Haigami

Posted
Posted

I took my truck to my buddy’s shop so he could put some matte black vinyl on the hood. I’m really happy with the look and it reduces the glare. 3938bafca23a951de6651d7c35b34f44.jpg5d43d60b210c2ab3462d1f58e179a460.jpg


Sent from my iPhone using Tapatalk

  • Like 10
Daly Senior Enthusiast

Daly

Posted
Posted (edited)
5 hours ago, Kelloggs67 said:

Well I am going to clean it tonight 

and I just got my bed liner spayed in 00B14063-F6C3-4CE9-8518-9B6E5FBBD62E_zpsB32A26C2-58D2-46D6-89C2-298D14116414_zpsFEFB1CAF-C04D-4798-ACF1-BFA5BDA760F5_zps

they did a great job done the right way https://www.bulletliner.com/

Just read your Signature, made me laugh and reminisce at the same time. This was my ZR2 when I was young. Stcker was on for an off road weekend with a bunch of buddies. The ZR2 upstaged all but one Jeep (A brand new Rubicon) that weekend. 

24538480039_large.jpg

I do miss that truck, it was unstoppable.

Edited by Daly
  • Like 1
UofAZCats Enthusiast

UofAZCats

Posted
Posted (edited)

I had a shop replace the chrome emblems that come with the truck (and really look out of place on the Rally editions) with black emblems.  I had a custom RALLY emblem made up to replace the LT on the tailgate.  Ordered all these on eBay.  The RALLY emblem was a custom that one of the sellers agreed to do for me at a very reasonable $20.  The black is so much better than the chrome on this model/color scheme.  Couldn't be happier with this mod.  Note the lettering perfectly straight though the picture does not look like it is.  Not sure if this is due to the rain or a strange picture angle or what.

IMG_20180718_181512.jpg

Silverado Black.jpg

Edited by UofAZCats
  • Like 4
Sierra Jon Enthusiast

Sierra Jon

Posted
Posted
9 hour detail session on the truck. Interior vacuumed, leather conditioned, floor liners cleaned, engine bay detailed, foam bath, hand dry, full clay bar, and extreme depth carnauba wax + x seal, windows cleaned and topped off with extreme wheel shine.
 
IMG_7497.thumb.JPG.3683aafc7f132b3d1aa2fcb5b2dcc125.JPG
Hey I know that guy! Lol Instagram #bongowit
  • Like 2
colonel00 Enthusiast

colonel00

Posted
Posted
14 hours ago, Kelloggs67 said:

Well I am going to clean it tonight 

and I just got my bed liner spayed in 00B14063-F6C3-4CE9-8518-9B6E5FBBD62E_zpsB32A26C2-58D2-46D6-89C2-298D14116414_zpsFEFB1CAF-C04D-4798-ACF1-BFA5BDA760F5_zps

they did a great job done the right way https://www.bulletliner.com/

Love my Bullet Liner as well.  Only had it a few months so far but they did a great job and it looks great.

  • Like 1
Sierra Dan Senior Enthusiast

Sierra Dan

Posted
Posted
On ‎7‎/‎15‎/‎2018 at 5:12 PM, Mikeb52r said:

Had my front valance off for a while and was really happy with it but still wanted it to be even at the bottom, so I cut the bottom of the valance off and reinstalled it. Got the idea from Swirvn

B4F6961E-DE60-4C77-A758-2855E81D9839.jpeg

AC002C5E-2B4B-42A0-BCD2-8CDAE868993B.jpeg

What did you use to cut?  Jigsaw, grinder with cutoff wheel?  Looks good!

Also is your Sierra Leveled in the front?

Mikeb52r Enthusiast

Mikeb52r

Posted
Posted
21 minutes ago, Sierra Dan said:

What did you use to cut?  Jigsaw, grinder with cutoff wheel?  Looks good!

Also is your Sierra Leveled in the front?

I used a Dremel cutting tool that I bought at Lowe's over the weekend on sale. I had been wanting to do this for over a few months but didn't have anything to cut it with until now. I just followed the curve/bend in the valance. I had to have my daughter help hold the valance as I cut it to keep it from flopping all over the place. 

 

Yes I have a 1 1/2" level kit on the front. Didn't want to go the full 2"s. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • lanaderay
      5 Best Slide Down Gameplay Tips! 

      By lanaderay · Posted

      Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • lingyuair
      Why I Recommend a Desiccant Air Dryer for Cleaner, Drier Compressed Air

      By lingyuair · Posted

      If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • Another JR
      Remote Start Noise 2024 2500 HD Gas

      By Another JR · Posted

      I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...