Jump to content

2014 GMC Air Bag Recommendations

churchy1313

Recommended Posts

churchy1313 Enthusiast

churchy1313

Posted
Posted

Out of all the airbags on the market, which ones do you recommend?

Anyone running the Hellwig?

Looking for low pressure kit.

AgDoctor Senior Enthusiast

AgDoctor

Posted
Posted

I have been looking at the Air Lift 2000 for a couple of reasons.

1. Can be used on my lifted Sierra without need for a space.

2. Supposed to ride better than the Firestones. I have had a few sets of those and they do ride stiffer.


Sent from my iPhone using Tapatalk

Kubs Enthusiast

Kubs

Posted
Posted

I just put a set of Firestone Ride-Rite air bags on mine, but I did it at the same time I installed Bilstein 5100 shocks.  I would say the ride is slightly more firm, but much much more controlled.  I think the firmness is more so the Bilsteins than the air bags.  Youre only supposed to leave 5-10 psi in them when not loaded.

Nasty Senior Enthusiast

Nasty

Posted
Posted

I had the mcg helper bags on my truck    no drilling at all  just bolt on

jacobrmiller05 Enthusiast

jacobrmiller05

Posted
Posted

I have a set of the Hellwig bags. I like them, but had to take them off when I put on my lift. I’m debating on either getting the spacer for them or just selling.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • SwitchBladeSierra
      14-18 Sierra 1500 Heated Steering Wheel Help

      By SwitchBladeSierra · Posted

      Howdy folks,   Recently I pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain (part numbers coming soon - will have to disassemble), and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash for the heating element.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But I seemingly can’t turn it off AND still no backlights on any of the buttons.    Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!
    • TrueBlue
      Brake Pad Warning Message

      By TrueBlue · Posted

      I'm about 1800 miles into my last oil change, and yesterday a message appeared saying oil life was at 77%. Not sure why it popped up but I think all of these electronics could be susceptible to solar flares or somesuch. I change my oil right at 3K each time, and that was the first time in 10870 miles that message came up. Strange thing is that it showed on the screen at all since I don't drive with that sort of info displayed on the DIC.
    • SwitchBladeSierra
      Heated steering wheel

      By SwitchBladeSierra · Posted

      I’m praying that someone sees this and can help me out… pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain, and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But can’t turn it off AND still no backlights.   Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!  
    • Vu1can
      Brake Pad Warning Message

      By Vu1can · Posted

      Checked the pads today and there's plenty of meat on them. If the message keeps coming up, I'll just answer YES that the pads were replaced and wait for the squeal.
    • richard wysong
      p0449, p0446, p0451 Evap codes

      By richard wysong · Posted

      Welcome to the Forum! Always post the code definitions along with the codes. there are over 18000 possible codes, no one remembers them all and most will skip over your post rather than look them up

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...