Jump to content

Recommended Posts

Posted
55 minutes ago, ryanv1212 said:

 

20190810_194333.jpg

Awesome. That turned out fantastic!

I love that Northsky Blue.

FB_IMG_1564597456367.thumb.jpg.a2ea5ef6986ecef71b92cc67d7a3163e.jpg

FB_IMG_1564683557684.thumb.jpg.fd2f510bab9f220c4569a3913f0ef051.jpg

FB_IMG_1564683365857.thumb.jpg.c03542ff0b038066c9cc562f968a0346.jpg

Posted
6 hours ago, Taran Narwal said:

Can someone tell me how I did.

truck was $38k msrp I did not qualify for all discounts form gmc but it was  from $53k. With taxes OTD I got it for $44k. 

1500 Sierra SLT 2019.

 

the dealer added $1800 when I got there paint and theft protection on all their vehicles. Regardless it was still $44k OTD. 

 

Pleasee let me know

$44k on an SLT is pretty good. That extra $1800 they got you for would’ve been enough for me to walk out though. Nothing but off the top profit for them. 

Posted
1 hour ago, HBKidJr said:

$44k on an SLT is pretty good. That extra $1800 they got you for would’ve been enough for me to walk out though. Nothing but off the top profit for them. 

I knew it. They insisted they couldn’t take it off cuz there was a lot of burglary in the area and it’s always dust there so paints gets bad quickly. So they had that applied on all vehicle. While no GMC were able to price match them either. 

 

UPDATE!! Someone from GMC dealership called me that they need me to sign contract again cuz they lost money at $44k OTD. So they are able to claim some $1k rebate. They are 3 hours away. Should I sign co tract again?? He assured

me no payment will Change  he nor my interest rate. He will be coming tomororw morning pls let me know if this is ok?

Posted
9 hours ago, Taran Narwal said:

I knew it. They insisted they couldn’t take it off cuz there was a lot of burglary in the area and it’s always dust there so paints gets bad quickly. So they had that applied on all vehicle. While no GMC were able to price match them either. 

 

UPDATE!! Someone from GMC dealership called me that they need me to sign contract again cuz they lost money at $44k OTD. So they are able to claim some $1k rebate. They are 3 hours away. Should I sign co tract again?? He assured

me no payment will Change  he nor my interest rate. He will be coming tomororw morning pls let me know if this is ok? 

Have them send you an electronic version or in the mail and you can evaluate.  Driving 3 hours 1 way to sign something is outrageous.

Posted (edited)
13 hours ago, ryanv1212 said:

 

20190810_194333.jpg

Looks fantastic, I've got one in black.

 

What product was used and how much did you pay?  I got a quote at a place near me and the OTD price for the coating was high but reasonable but requiring hand washes or the warranty gets voided caused me pause.  I simply don't have time to be hand washing twice a month.  Or the ability to hand wash in the winter months.

Edited by Maverick0984
Posted

1) would they do this if your position were reversed? ;)

 

2) I bought mine over the internet from 5 plus hours away, they delivered all paperwork to me, they even delivered the vehicle.  
 

 

Posted
8 minutes ago, Maverick0984 said:

Have them send you an electronic version or in the mail and you can evaluate.  Driving 3 hours 1 way to sign something is outrageous.

Just got a call from the guy he is sending someone from GMC dealer that’s near my house

so I guess that’s less suspicious. But I will evaluate 

Posted
1 hour ago, Taran Narwal said:

Just got a call from the guy he is sending someone from GMC dealer that’s near my house

so I guess that’s less suspicious. But I will evaluate.

He was actually from Gilroy 3 hours away. Everything was the same except MSRP was higher but nothing changed but couple   Dollars.

Posted
4 hours ago, Maverick0984 said:

Looks fantastic, I've got one in black.

 

What product was used and how much did you pay?  I got a quote at a place near me and the OTD price for the coating was high but reasonable but requiring hand washes or the warranty gets voided caused me pause.  I simply don't have time to be hand washing twice a month.  Or the ability to hand wash in the winter months.

Yea theres lots of options out online hard to dig through the shit products! I'll check and see what this is called. I have a buddy that does it and wanted 1600 to do the truck! It's a little work to do yourself but worth doing! 

Posted
23 hours ago, Maverick0984 said:

Looks fantastic, I've got one in black.

 

What product was used and how much did you pay?  I got a quote at a place near me and the OTD price for the coating was high but reasonable but requiring hand washes or the warranty gets voided caused me pause.  I simply don't have time to be hand washing twice a month.  Or the ability to hand wash in the winter months.

I used AvalonKing Ceramic coat. It worked out great. Application process is time consuming but worth it in the end. You can put it on basically all surfaces on the truck other then seats. Now water just repels off of it and dust/dirt blows off with an air hose from my compressor! I put it on my windshield and i dont even need windshield wipers hardly now. They recommend 3 bottles for a large truck, i bought 4 to be safe but only used about 2.5 total. I plan on using the rest on my tractor and boat. Heres a link to their site if your interested, https://avalonking.com/ref/ryanvaught/. I may start a new tread and include some before and after pics as well as video of how water repellent it is.

Posted (edited)
25 minutes ago, ryanv1212 said:

I used AvalonKing Ceramic coat. It worked out great. Application process is time consuming but worth it in the end. You can put it on basically all surfaces on the truck other then seats. Now water just repels off of it and dust/dirt blows off with an air hose from my compressor! I put it on my windshield and i dont even need windshield wipers hardly now. They recommend 3 bottles for a large truck, i bought 4 to be safe but only used about 2.5 total. I plan on using the rest on my tractor and boat. Heres a link to their site if your interested, https://avalonking.com/ref/ryanvaught/. I may start a new tread and include some before and after pics as well as video of how water repellent it is.

Thanks for the info.  I had seen that product before.

 

What's your plan for maintenance?  Hand washes only? If you're in Arkansas, I guess you don't have to worry about snow too much.

 

That's my main hangup right now.  I don't mind spending the time if it lasts 3 years but I'll need to use Automatic washes.  Decent, higher quality ones, but still automatic.  If it's just going to last 6 months because of that, the value drops off of a cliff for me.

Edited by Maverick0984
Posted
1 hour ago, Maverick0984 said:

Thanks for the info.  I had seen that product before.

 

What's your plan for maintenance?  Hand washes only? If you're in Arkansas, I guess you don't have to worry about snow too much.

 

That's my main hangup right now.  I don't mind spending the time if it lasts 3 years but I'll need to use Automatic washes.  Decent, higher quality ones, but still automatic.  If it's just going to last 6 months because of that, the value drops off of a cliff for me.

I plan on hand washing biweekly/using air hose to spray off in between if needed. Not much snow here so i dont have to worry about that much at all!

Posted

$42,086 19 GMC Sierra CC SLT X31 with premium package.

 

Purchased from Everett in central Arkansas and they delivered to my house about 4 hours away. 

  • Like 1
Posted
34 minutes ago, Bootheel said:

$42,086 19 GMC Sierra CC SLT X31 with premium package.

 

Purchased from Everett in central Arkansas and they delivered to my house about 4 hours away. 

That's a good deal right there. 

Posted

What is fair to negotiate off the MSRP at this point with the 2020 models just weeks away.  is asking for 25% off MSRP asking to much?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I agree with Tim.  As tech heavy as engines are these days, no way I’d be an early buyer of the new 6.6.  Of course, I bought my ‘26 Denali w/the 6.2 after dumping my Tundra with it’s defective 3.5 liter imploding engine disaster, so I’m a little gun-shy.  That said, my 6.2 has been rock solid.  I don’t drive it like I do my BMW Z4 M40i, but I don’t baby it either.  I got a V8 for a reason.  But I’m averaging 18 around town and 22 highway.  I have seen 24 highway as well when I wasn’t loaded up heavy.  Considering my Tundra with the twin turbo V6 only got 14.5 in town and 17 on the road, I’ll take the 6.2 all day, every day.  If I were you, I’d grab a ‘26 while you can.  Inventories are probably gonna start dropping and I’ll bet the deals will start looking sweeter as well.
    • I am curious if anyone has figured out a way to add an hard button AUX or 360 Camera switch to the center row of switches. I have a 2021 AT4, and want to split the hill decent button and add a 360 camera button so that you don't have to go into the center display and locate the camera functionality, etc...   My father's 2024 Yukon XL AT4 and it has a hard button, see below. I found this thread on the Yukons, but it seems like there may not be a part number for the 2021 sierras. https://www.gm-trucks.com/forums/topic/255339-adding-hard-button-for-camera-on-2021/ Anyone else figured this out. Seems like it would need to be a custom switch!   I am getting ready to install the auto stop/start eliminator, so would be nice to knock them out at once.     Upvote1Downvote0Go to comments
    • Looks like the entire state is burning. 😬
    • Through the years it hasn't been my typical method as I tried to drop oil on an engine that was hot from having been worked, however that was not always practical and had to fire up a unit and let it warm up reasonably well and drop the oil when I had the time to do it but am referring to not only vehicles but a variety of farm equipment and highway tractors etc. However on a vehicle where one is crawling under it and the exhaust is nearby to ones body and if wanting to pull the plug without danger of being hit with boiling hot oil or attempting to remove a HOT oil filter, its sure safer and easier to not have everything smoking hot and can remove the filter right away when under the vehicle and let it all drain. Of course its not the end of the world if a bit of oil stays in the engine that might have eventually found its way out, I like to get out as much as possible but any oil changes that take place in shops would rarely be sitting around for very long at all before the plug is thrown back in and filter slapped on and oil poured in and sent out the door quick like. There would be very little time spent ( assuming they even did it ) in starting the engine with oil to fill the filter, then waiting to verify the level on the stick. A good reason to check ones oil level shortly after a shop changed the oil on a vehicle just to make sure its correct and to look under for any oil around the drain plug or filter. 
    • Cool to see another Vermonter!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...