Jump to content

Recommended Posts

Posted

There are a couple posts in this thread where people claim an open water cup splashed most of the water out because the vibration was so bad. This latest one doesn't look anywhere near that bad.

 

 

This is one of my videos for comparison, 76 MPH on a freshly paved highway. Imagine what its like on old shitty roads, granted it was made substantially better by replacing a bad tire, nonetheless, it is still readily apparent in my truck. I actually think that replacing the tire made it worse at lower speeds, but helped at higher speeds.

Posted

Put it back up and let the people decide. If you think that water is vibrating at 80 mph, I'd love to see your definition of smooth. I have no love affair with GM but with guys like you out there claiming that the water and ice in the video is vibrating at 80 mph, I see now why they are denying claims.

Hang in there steelcity. There are a few haters that seem to have made this their life's cause. Some, have even though they've settled with GM or no longer own a 2014+ GM truck. Don't let'em shout you down :)

  • Like 1
Posted (edited)

Hang in there steelcity. There are a few haters that seem to have made this their life's cause. Some, have even though they've settled with GM or no longer own a 2014+ GM truck. Don't let'em shout you down :)

I wish you could've seen the video of the glass of water that he is claiming is vibrating. A couple of ice cubes are barely moving in the water at 80 mph. He deleted it and that speaks volumes.

And you're right, what cracks me up the most is the guys who traded for a Ford or Ram or Toyota, that keep coming back to tell us how superior their trucks are.

Edited by steelcity
Posted

I think anything other than a magic carpet is going to shake a little at 80 mph. If that little bit of water shaking at 80 mph is troublesome to you, you're a lot more anal than I am. And I'm anal! I don't care how smooth the road appears to be there has to be imperfections, cracks, dips, expansion joints etc. You're not gliding on air. This IS a truck with stiff leaf spring rear suspension. Put that same glass of water in any vehicle and I think the exact same thing would happen at 80 mph.

If that little vibe is there at 80 mph and only 80 mph, you're going to be driving yourself nuts finding yourself driving at 80 mph everywhere you go, saying "there it is". I'll bet it doesn't vibrate at any other speed.

 

I did this test with my wife's 22K Sonata, no vib, water just sits there. But I've now had 2 GM trucks that do exactly what the video shows.

Posted

 

I did this test with my wife's 22K Sonata, no vib, water just sits there. But I've now had 2 GM trucks that do exactly what the video shows.

Mine has a slight buzz similar to the video. Mine has no vibration if I place the water bottle on the floor instead of the cup holder. Have you or can you try this?

Posted

Mine has a slight buzz similar to the video. Mine has no vibration if I place the water bottle on the floor instead of the cup holder. Have you or can you try this?

 

No, and I'm not going to, for $56K I expect them to be built correctly. There are other car companies that do it right, GM can to or the other companies will have our business.

  • Like 1
Posted

 

I did this test with my wife's 22K Sonata, no vib, water just sits there. But I've now had 2 GM trucks that do exactly what the video shows.

I did this test with my 700 mile Corvette and at 80 mph my ice cubes are bouncing around a lot more than the video that was deleted. I can't imagine ice cubes not moving in a cup of water going 80 mph in a leaf spring suspended truck.

Posted

 

No, and I'm not going to, for $56K I expect them to be built correctly. There are other car companies that do it right, GM can to or the other companies will have our business

No argument there, vehicles are very expensive and you have the right for it to perform how you expect, If not, then you have the right to sell it and buy something else. It seems this is the direction you are headed so my only advice is sell it sooner rather than later to minimize your loss.

 

For what it is worth, I've owned Pontiac, Chevy, Buick, Ford, Dodge, Honda, Hyundai, and not a single one of them was perfect from day one to final day I owned them. I have a 2011 Mustang GT with 20000 miles and it has galvanic corrosion (rust caused by dissimilar metals) on the leading edge of the aluminum hood and Ford states this is normal. The Hyundai had more electrical switches replaced than I cared to count. The Honda puked oil out of every engine gasket when their crankcase vent (poor design) froze one winter. The best vehicles I've owned have been my 2005 Silverado and 2011 Camaro. I put a lot of miles on each of those with only small issues.

 

Back to the vibration issue, like I said, mine has a slight buzz that is isolated to the cup holders. Yep it is annoying when my Mt Dew fizz is gone on a long drive. Other than that I can ignore mine 99% of the time. I too would be really annoyed if it were worse like some of the videos I've see. It's my nature though to try to figure out or help figure out the source of the buzz because I love everything else about this truck and have driven enough other brands to know better than put my dollars on the other brand trucks. Hopefully someone else is willing to help isolate the cause will be kind enough to check the water bottle on the transmission tunnel.

Posted

I had a Maxima that was perfect from day one. 5 years, nothing but oil changes and tires. Had a Civic that went 8 years on original battery, put O2 sensors in after 9 years and gave it to a nephew. He has had it 2 years and put front brakes on it. Some accept inferior products, I don't. If every commercial you make touts your "Professional Grade" you damn well better live up to it.

  • Like 1
Posted

I had a Maxima that was perfect from day one. 5 years, nothing but oil changes and tires. Had a Civic that went 8 years on original battery, put O2 sensors in after 9 years and gave it to a nephew. He has had it 2 years and put front brakes on it. Some accept inferior products, I don't. If every commercial you make touts your "Professional Grade" you damn well better live up to it.

Did ice cubes ever move a microscopic amount in a cup of water in the console of either of those vehicles going 80 mph?

Posted

Did ice cubes ever move a microscopic amount in a cup of water in the console of either of those vehicles going 80 mph?

 

Never tried it because it was smooth as glass, no reason to. But I had a GM engineer in the second truck with his pico scope and we both watched the vibrating water bottle.

Posted

Mine is in again today. I brought the bulletin with me that references the things to try with picoscope, shaft, tires, shocks etc, Service Manager who I have a long history with who said last visit thought it was a tire issues, agrees with me know that he feels its an inherent issue with certain trucks. Well that made my day, at least they admit my problems are not imaginary. This will be my last GM. The love affair is over. I am 39 years old and have owned GM since I was 16. I do not blame the dealership. GM should be ashamed of this problem and own up to it but I am sure hell will freeze over first.

Posted

My truck at 11000 miles has developed a vibration now. I feel it in the floor boards as well as the steering wheel at highway speeds. I will have the tires checked first to make sure however. Oh yeah.... it's a 2015 Tundra double cab... lol.

 

Sent from my SM-G900W8 using Tapatalk

Posted

skylineflyer,

Thank you for posting. Yours is significantly more than my slight buzz. I agree this is not something GM should ignore. Over time a shake like that will have a negative affect on lots of other parts. Can you test the water bottle on the transmission tunnel for me? And then flip up the console and place the water bottle on the seat and see if it still shakes like that?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Ok I missed that part that yours is a GM. The strange part is that the choice for year ranges and within the year of 2026 is different on the Sierra then on the Chev for some reason as I am looking at my tool at the Sierra choices. Now I am guessing you see as to your sensor part number as it may be different on your truck for some reason and a call to GM should get you the part model number of the sensors you should have as well as which MHz your sensors are. I know mine are the ones as per what I listed but there are other choices in the Autel and got me wondering if by some chance they put different ones in your truck. Having said that, did you try using each of the choices starting from No 1 and going on down the list, not sure if that would mean shutting off the engine each time and resetting the tool and going at it again each time. Also I thought of something else which may sound retarded but if there was some stupid chance that the chev choice would work. The reason I say that is that the Sierra is showing a range up to 06/2026 for the various choices of sensors it could be where as the Chev has one choice that has that 12/2026. By the way it is possible to not run the truck and you may know that as per not pressing the brake but pressing and holding the start button for a few seconds and it lights up the dash ( its called service mode ) but that sucks battery power and if it were me doing it that way I would be throwing on a decent sized battery charger before doing it that way as killing your battery won't make you happy at me at all !.    Like I say, just a thought to try the Chev choices if you have already exhausted the Sierra choices but first it would be nice to know for sure what exact sensor model and hertz your truck uses as I assume only those choices that mention the sensor would work unless a choice that does not mention the sensor model would somehow work. Its frustrating when one is trying to use tools like this without the experience of the tool and the vehicle, as I am sure dealer techs themselves struggle with it when starting out or a new model year comes along that is slightly different. 
    • I tried before I updated the scan tool just incase an update messed it up, but it never worked so I updated the scan tool and it still didn't work.   Only difference is I click on Sierra not Chevrolet cause I have a Sierra.   If I click on 2026-2024 I didn't have any option to change placard, when I click on 2023 it does give me the option but when I try to do it,.it says vehicle not supported!   I have my region or market or whatever it is set to America I think, is that what yours is set to?
    • Its just that it worked on 2024 trucks on this forum and my 2025 model truck, unless GM did something since that point to screw up access or Autel has a bad update. I haven't had need to use my tool since last year when I did the changes to the placard pressure settings and since then I updated the software on my Autel but have not plugged into the OBD so hard to say if I would get a surprise as well.    All I know last year when I bought the Autel I was warned to be sure to update it before I tried using the unit as they said who knows how long ago unit itself was actually manufactured as the software could be way out of date. 
    • And so you had gone through the process of registering and updating the tool and so on ?. All I can say is that on the front page as the tool fires up you go to advanced mode, then vehicle model comes up and you choose Silverado ( not the DRW or EV  since your a single rear wheel ) , then I think its choice 2 which is 07/2021 - 12/2026 ( 433mhz 13542523 ) as that is the series of tpms sensors and then go down to choice 5 which is tire type/pressure selection. Hit yes and it says to connect to OBD port and turn ignition on.    Having said this, I updated the software in my tool lately and these year range choices look different from the past due to them doing some updates it would appear and I have not connected up to the OBD port since last year so hopefully I am not in for a surprise with them screwing up the software and that it won't work on my truck anymore either.    So my question is, when you plugged into the OBD and started your truck it had that message on the Autel screen "vehicle not supported" ?. That does seem odd as tire shops would be pissed right off if hey can't use their tool on the model year after mine that in theory is supposed to be much the same truck ... unless GM did some change in the computer system to block certain things from access. 
    • Understanding and using modern scan tools is its own body of knowledge. I had little hope that would work...programming access to the BCM is probably required and that is not easy for us consumers. Expensive scan tool, GM programming subscription, online authentication, etc.   It also may be a matter of finding the right dealer to program it for you. Flashing a modern BCM might be a little too advanced for most tire shops.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...