Jump to content

Recommended Posts

Posted

Agreed. You usually lose between 10- 20% as soon as you drive off the lot, then depreciation for mileage and such

 

Sent from my SM-N900V using Tapatalk

Posted (edited)

delete

Edited by oneandzero
Posted

Heres a pic of the pos711638b4f93cc5c71d6d01426a5ce09b.jpg

 

 

Sent from my iPhone using Tapatalk

Man that thing has a ton of rake. Looks sharp though.

Posted

I just noticed the exaggerated rake. That road has a pretty steep incline. Not that bad on flat ground. Optical illusion maybe?

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Posted

Low $30s on trades. Sticker was $53 and walked out the door at $41 last April.

 

 

Sent from my iPhone using Tapatalk

I've been one of the biggest proponents for how bad the trade value is, and I have to agree, that vale isn't terrible, realistically its probably 4k too low, but its still better than my 14k too low

 

If you paid 41 and were offered low 30's a year later, that isn't actually horrible.

I concur, but still say its too low

Posted

I just noticed the exaggerated rake. That road has a pretty steep incline. Not that bad on flat ground. Optical illusion maybe?

 

 

Sent from my iPhone using Tapatalk

That's probably it.

Posted (edited)

Dropped mine off for vibration service #5. Took the service manager on a test drive and he said, "yup it vibrates". I also handed him a print out of the autoguide article. He said it's the first he's seen it. I got a 16 loaner and it rides almost identical and I'll use that in my defense if they try to shove the "effects amplified by leveling kit" bullshit at me again.

 

Videos of my vibration.

 

 

Edited by tootall87
Posted (edited)

I think anything other than a magic carpet is going to shake a little at 80 mph. If that little bit of water shaking at 80 mph is troublesome to you, you're a lot more anal than I am. And I'm anal! I don't care how smooth the road appears to be there has to be imperfections, cracks, dips, expansion joints etc. You're not gliding on air. This IS a truck with stiff leaf spring rear suspension. Put that same glass of water in any vehicle and I think the exact same thing would happen at 80 mph.

If that little vibe is there at 80 mph and only 80 mph, you're going to be driving yourself nuts finding yourself driving at 80 mph everywhere you go, saying "there it is". I'll bet it doesn't vibrate at any other speed.

Edited by steelcity
Posted (edited)

I think anything other than a magic carpet is going to shake a little at 80 mph. If that little bit of water shaking at 80 mph is troublesome to you, you're a lot more anal than I am. And I'm anal! I don't care how smooth the road appears to be there has to be imperfections, cracks, dips, expansion joints etc. You're not gliding on air. This IS a truck with stiff leaf spring rear suspension. Put that same glass of water in any vehicle and I think the exact same thing would happen at 80 mph.

If that little vibe is there at 80 mph and only 80 mph, you're going to be driving yourself nuts finding yourself driving at 80 mph everywhere you go, saying "there it is". I'll bet it doesn't vibrate at any other speed.

Second video doesn't show it as badly as you can see the video itself is shaking too. It's not "little bit of water" like it may seem from the video. I had to stop on my last cross country trip the seat shook so bad it gave me a headache. Please tell me again how normal you think this is.

Edited by tootall87
Posted (edited)

Second video doesn't show it as badly as you can see the video itself is shaking too. It's not "little bit of water" like it may seem from the video. I had to stop on my last cross country trip the seat shook so bad it gave me a headache. Please tell me again how normal you think this is.

Film that exact same glass of water with ice in one of your other vehicles center console going 80 mph down the highway and show me how still the water is. I could make that glass of water shake worse than that with a hard fart. 80 mph is moving! I'd love to tell you again how normal it is but I need to see the video you deleted.

 

Why did you delete the water cup video?

Edited by steelcity
Posted

I posted this earlier... those who are finding vibration in the cup holders, cam you place a closed water bottle in the cup holder and watch it shake then place it directly in front on the transmission tunnel and see if the shake disappears. I am not by any means saying the vibrations doesn't exist. Mine has a slight buzz in the console cup holder area but none on the floor directly in front. I believe some of the issue is the structural design and mounting of the seat and how it reacts to the much stiffer frame.

Posted

Why did you delete the water cup video?

 

Because I don't need a forum jockey telling me my problem doesn't exist. Good day.

Posted

 

Because I don't need a forum jockey telling me my problem doesn't exist. Good day.

Put it back up and let the people decide. If you think that water is vibrating at 80 mph, I'd love to see your definition of smooth. I have no love affair with GM but with guys like you out there claiming that the water and ice in the video is vibrating at 80 mph, I see now why they are denying claims.

Posted

There are a couple posts in this thread where people claim an open water cup splashed most of the water out because the vibration was so bad. This latest one doesn't look anywhere near that bad.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I do have the 8 speed.  Interestingly enough, after driving my truck for the past 2 days now, I have not had the clunking issue at all!  I am beginning to think it may have been suspension/leaf spring related, and somehow when the shop put my truck on the lift to do their initial inspection, it relieved some built up tension/pressure that was causing my problem.  I swear it felt I was a bull rider on a bucking bull the way the truck would almost rock back and forth slightly before the big thud/clunk when coming to a stop.  I am hoping I got lucky here and it's gone for good.
    • Bring it to discount tire. They do free rotations even if you didn’t buy your tires there. I didn’t believe it until I tried and they did. You can tip the employee if you would like 
    • Best part of this video is how it resets expectations. Wonderfully done piece. It also made clear a few points I've made from day one. Detergent oils DO NOT KEEP A MOTOR CLEAN at the recommended or longer change intervals. They just get dirty slower than a non-detergent oil and there isn't spits difference between them on this point if they carry the DEXOS license. Great thing about the license that gets missed is it assures CONFORMITY even it that means a low bar.    One thing he did not talk about that I paused on an magnified was the condition of the oil ring separator. Besides a stuck ring a plugged separator and land drain back is huge when it comes control. We see in short order improvement in control IF that is the problem.    Another item I took exception to and he did not make plain was the condition of the timing chest and under valve cover having something to do with indicating piston cleanliness. Schaeffer's Oil makes that same omission in their million mile Ford video. I'm guessing he has never torn down a Red Line HP, AMSOIL SS motor that has been on that diet from the get. What he showed in the video was a good deal of varnish. Something totally absent in Peppers 165K cover off look. I smiled because he did his at the same milage.    He also makes the mistake of assuming oil temperatures in the pan are the temperature all over the motor even though he makes note of the piston being the hottest part of the engine. that baffled me a bit.    I can tell you from personal experience and witnessing teardowns of family motors that even oils of the 1960's would keep them squeaky clean when OCI's were 1500 to 2000 miles without exception. At 3K and above you get what he experienced and the longer you leave it the quicker to gets to the junkyard.    I think his is missing a opportunity not tearing it down again when he's done killing it. Time would be his only cost. 
    • Very often the part number on the trim part is just for the vendor order/assembly plant and will not show up in the parts system.  They won't make a bunch of extra parts that were not ordered. Keep in mind, lots of these parts were made to be "just in time" parts meaning they were dedicated to a vehicles ordered and sequenced for assembly.       Also, trim parts will often say, paint to match.     
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...