Jump to content

Shake or Vibration Issues

Silver space ship
 Share

Recommended Posts

abominable z71 Enthusiast

abominable z71

Posted
Posted (edited)

 

Just out of curiousity, what is the u joint bolt torque specs?

They don't have an exact torque spec but more of a procedure. This is from my memory but you can find it somewhere on this site. I believe you torque them to 59 ft-lbs. After they are all at 59 ft-lbs you then turn each nut an additional 130 degrees. not sure if this is the exact procedure but it's something along these lines. I have mine at 78 ft-lbs and from where they were from the factory to 78 it took almost 3 full turns to get them there. It helps but didn't solve the issue by any means.

 

I just re-read your post, you're looking for the u-joint bolts on the drive line? Can you even get a torque wrench on them?

Edited by abominable z71
  • Replies 12.9k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

csckickass
csckickass

Well folks, I did it. After all the failed attempts at the Chevy dealer I traded it in for a 2015 Ram 1500 Larame. I have to agree with the other folks on here that have done the same thing, it was th

mafd2
mafd2

Apparently you and the other customer reps don't care. If you or GM would care y'all would put more effort in the matter. Just coming on the forum and stating the same repetitive posts and being a 3

DALaws
DALaws

Well I have some good news and bad news about my truck vibrations. Good news is that my truck has a significantly less vibration at speed. The bad news is my truck has significantly less vibration. Fo

Posted Images

Severado Enthusiast

Severado

Posted
Posted

Any of you have 275/60R20 tires or larger? If so, what brand? Improvements to ride quality? I've been all over this forum and a couple others. Mostly curious.

LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
Posted

Any of you have 275/60R20 tires or larger? If so, what brand? Improvements to ride quality? I've been all over this forum and a couple others. Mostly curious.

I have that size in an LT tire. My vibration went away after swapping from junk stock tires, and these ride a bit better even though they are an all terrain and they are LT rated not P rated

 

Sent from my SM-N900V using Tapatalk

Elevation 2019 Enthusiast

Elevation 2019

Posted
Posted

Well as of now my 2015 All -Terrain is in for the shakes no bad but just enough to finally have the dealer look into it .3rd time I have commented about and have it documented on each visit , 1st time rebalance tires last year, 2nd time rotation and rebalance balance was out, finally this time they have it for 2 days so far balance is good next step they are connection the vibration test kit? with pile of sensors etc connected and driving it a round. have 35000 KM (Canada) 21000 Miles

also they are checking the lazy shifting of transmission at least to me it is. no matter the out come it is being traded in next spring. being for sale now and potential buyer have commented on the minor shake so as of now I can not even sell the thing !!

Plus seat belt recall and air bag recall done.

Up date Sept 19 truck was at the Dealer for 2 days they found no problems I may be crazy cause no one else feels it even my wife.

Best out come so far is listed it for sale Sept 05 before dealer visit and Sold pending mine and buyer schedule to work out. it will be gone by Sept 21. They felt no vibration at all on the test drive at highway speeds.

pureskull Enthusiast

pureskull

Posted
Posted

New poster here. I do have the same issue as well. I didnt notice it as much when I had the OEM 18' tires on. It got worse once I switched to 33s 12wide 20''rims OFF road tires. I did some tire balancing and then it didnt vibrate much in USA highways. However once abroad I do notice it when I go up hill or when Im doing off road. I do notice strong amounts of vibration when the pavement is not very well made. As If im about to lose control of the vehicle when im driving. My old Mazda 2001 truck piece of junk doesnt vibrate as much and its a diesel junk that vibrates on idle LOL. Im looking around the thread and cant find any solutions. Did anybody compile possible solutions or something to ease the vibration at least? Also this truck is no longer in the states. So Its impossible for me to take it to the dealer and get a fix.

Gofas Enthusiast

Gofas

Posted
Posted

Praying new tires help my ride. I aired up these good years stockers to 39 p si and seems take away the trembling that goes along with the Chevy shake. So considering trying an LT tire. And I'm still saving up to try new leaf pack for the rear.

David_ Enthusiast

David_

Posted
Posted (edited)

Add me to the list of owners of a $50K vibrator. My 2015 High Country started vibrating at around 70MPH when it hit 9000 miles. I'm at 14K miles now and it is getting worse so I dropped it off yesterday. Received a call today saying the tech had confirmed the vibration exists and that the first step is a force balance at a cost of $230. I told them to go ahead and do it. The next step will be to look at the tires if this doesn't fix the issue.

 

 

What is really strange is that it doesn't always happen. I can be driving into work vibrating away at 70MPH, hit some traffic and slow down, get back up to speed and experience no vibration.

Edited by David_
tnchevy Senior Enthusiast

tnchevy

Posted
Posted

Add me to the list of owners of a $50K vibrator. My 2015 High Country started vibrating at around 70MPH when it hit 9000 miles. I'm at 14K miles now and it is getting worse so I dropped it off yesterday. Received a call today saying the tech had confirmed the vibration exists and that the first step is a force balance at a cost of $230. I told them to go ahead and do it. The next step will be to look at the tires if this doesn't fix the issue.

 

 

What is really strange is that it doesn't always happen. I can be driving into work vibrating away at 70MPH, hit some traffic and slow down, get back up to speed and experience no vibration.

Not strange at all, been mentioned numerous times on this thread. I just hit 14k miles on my truck and the shaking has almost gone away. I might be one of the few whose truck got better with miles but it also points to my problems being mostly with the tires IMO.

Pinnacle Enthusiast

Pinnacle

Posted
Posted

Tell them to stick that 230 up their asses. It's under warranty.

 

Sent from my SM-G930R4 using Tapatalk

 

Exactly

David_ Enthusiast

David_

Posted
Posted

According to them, GM does not warrant tire balance. They people at the dealer aren't being assholes about it but I will drop it right back off if it isn't fixed.

14silverado4.3 Enthusiast

14silverado4.3

Posted
Posted

According to them, GM does not warrant tire balance. They people at the dealer aren't being assholes about it but I will drop it right back off if it isn't fixed.

Keep the receipt because it will feel great for a few days and slowly return. Get your money back when it does!

LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
Posted

Yeah I believe GM covers the tires, from having to replace them or to rebalance them, up to 12k. My dealer ate the cost of rebalance at 34k, they are awesome

Schmidt152 Enthusiast

Schmidt152

Posted
Posted

I don't see how they can charge you. I just had two replaced and all 4 road force balanced. Plus the front 2 re-road force balanced after I still was experiencing vibration. I left the dealership today and I'd say it's 98% fixed. I maybe just looking for it so much now that I don't know what fixed even means anymore. I swear I'm paranoid about the issue now, especially after reading this thread lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • CamGTP
      Gas Prices

      By CamGTP · Posted

      Paid $2.72 for E85 today.
    • Atlas
      Gas Prices

      By Atlas · Posted

      Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • scotthvac.net
      2022-24 halogen - led grille swap

      By scotthvac.net · Posted

      2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • davester
      Replacement Radiator

      By davester · Posted

      And use RA's 5% discount code if you buy from them.  google for the code, one is always available.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...