Jump to content

Intellilink Software Version

Txan

Recommended Posts

Txan Enthusiast

Txan

Posted
Posted

Just wondering what software versions yall have, I tried doing a search and couldn't find anything. The main reason I ask is because I saw a video in one of the threads showing how to setup the power folding mirrors, under the comfort and convenience settings, mine seems to be missing those options. My truck is a 2014 Sierra SLE All Terrain, software version is 23174395.

Txan Enthusiast

Txan

Posted
  • Author
Posted

Sorry, I forgot to mention that my truck did come with power folding mirrors.

Txan Enthusiast

Txan

Posted
  • Author
Posted

I tried that but based on the video, it is a setting you need to activate through intellilink. I do have power folding mirrors, I've used them with the button on the door panel, just trying to figure put if the software is only for certain trucks.

fondupot Senior Enthusiast

fondupot

Posted
Posted

Try this:

Press and "hold" the lock button on your key-fob remote, if you have the power mirrors they will fold in for you.

 

You have to enable the feature in the intellilink tho.

GTPprix Senior Enthusiast

GTPprix

Posted
Posted

Unfortunately that software part number is useless. Press Home, Power and Menu at the same time you should get an HMI menu, in there you can find the REAL software revision IE 12.6NXXX ;)

chuckl1218 Senior Enthusiast

chuckl1218

Posted
Posted

Sorry if this is repeating, but here is how this works from the Silverado Owner Manual. If you have folding mirrors, you should have these settings.

Auto Mirror Folding, page 2-16...

If equipped, with the ignition off,press and hold "lock" on the RKE transmitter for approximately one second to automatically fold the

exterior mirrors. Press and hold "unlock" on the RKE transmitter for approximately one second to unfold.

See Remote Keyless Entry (RKE) System Operation on page 2-4.

This feature is turned on or off through Vehicle Personalization. See Vehicle Personalization on page 5-44.

Page 5-44 and 5-45...

Setting is in Vehicle Personalization, Comfort and Convenience, Auto Mirror Folding

Auto Mirror Folding

When on, the outside rearview mirrors will automatically fold or unfold when the Remote Keyless

Entry (RKE) lock or unlock button is pressed and held. Select Off or On.

Txan Enthusiast

Txan

Posted
  • Author
Posted

Unfortunately that software part number is useless. Press Home, Power and Menu at the same time you should get an HMI menu, in there you can find the REAL software revision IE 12.6NXXX ;)

 

I will try this when I get my truck back from the dealership tomorrow, they are fixing the rust on the frame. Also while I am there I will ask if they know anything about this subject.

 

 

This feature is turned on or off through Vehicle Personalization. See Vehicle Personalization on page 5-44.

Page 5-44 and 5-45...

Setting is in Vehicle Personalization, Comfort and Convenience, Auto Mirror Folding

Auto Mirror Folding

When on, the outside rearview mirrors will automatically fold or unfold when the Remote Keyless

Entry (RKE) lock or unlock button is pressed and held. Select Off or On.

 

This is what I am missing under Comfort and Convenience even though my truck does have power folding mirrors.

Darthmalo Enthusiast

Darthmalo

Posted
Posted

I have the same problem with my truck. My truck is a SLE with All Terrain package. Maybe this feature is only available for SLT trucks. :dunno:

Txan Enthusiast

Txan

Posted
  • Author
Posted

I have the same problem with my truck. My truck is a SLE with All Terrain package. Maybe this feature is only available for SLT trucks. :dunno:

 

Glad I'm not the only one, I'll talk to the dealership tomorrow...hopefully they have more information. Maybe they can just load the SLT software in there.

Sluggo Enthusiast

Sluggo

Posted
Posted

 

Glad I'm not the only one, I'll talk to the dealership tomorrow...hopefully they have more information. Maybe they can just load the SLT software in there.

 

Just picked up my AT SLE and was wondering the same thing. I couldn't find the stupid setting anywhere in the menu even though the manual says where to look. Any update from your dealer?

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      "Teardown" is complete. Head surfaces are clean and ready, new intake is prepped and ready. Coolant drained and water pump is removed, radiator is removed, new hoses and pump are ready.   The replacement intake is also from a '95 (with I think 260k, the odometer said). Noticeably less pitting where it covers the rear coolant passages. I'm not sure if that's a tribute to more frequent use, more frequent coolant changes/upkeep, or if the intake was machined at some point. But it appears I found a good one.   My coolant hoses were original, and the lower hose still retained the factory spring inside. It's not really rusty, but it's got deposits all over it. Unsure if I should re-install it (will thoroughly clean it first). Someone said hose technology has gotten better since 1995 (has it?) and I don't need the spring. I think modern EPDM is what made those hoses last from 1995-2026, so it's a question of how much suction can the water pump really pull, and will it collapse the hose without a spring?   I'm stopped and waiting for parts, however.   When I first brought the truck home, the fan was intermittently hitting the radiator shroud. I could see someone had monkeyed with the shroud (put a bunch of cardboard as a spacer between the upper/lower shroud halves. Someone said the motor mounts have likely failed and the engine has sagged. I wasn't sure I believed that. The engine is really solid in its mounts: To remove the old intake I *just* nearly permanently welded to the heads with freshly cured RTV and gasket snot two weeks ago, I literally had to use the arms on my lift and a chain with a bolt attached to the intake to pull it loose. It almost picked the front of the truck off the ground before ....scuuuuuuuuuuup.... I could actually hear the gaskets tearing and it broke loose and the whole truck settled back down. Motor barely moved.   SO, those parts I'm waiting on... The lower radiator mounts/bushings had completely failed. The radiator needs to be insulated from the rad support, and the bushings help the rad stand at the correct height. The plastic "baffle" was also destroyed at some point. Someone had attached the shroud to it incorrectly, overlapping a joint that should have been underlapped, creating another suspect issue potentially causing things to hit the fan. Broken tabs, side is busted off, and it's perma-formed/bent where it was jimmied incorrectly.   The baffle? Unobtainum. Long since discontinued from GM, of course. Aftermarket/capa/chinese? Also unobtanium. In GM's infinite wisdom, it appears there are at least two different variations whether the Blazer is 2 or 4 door, and I can't yet tell if they shared the same part with the S-pickups. Plan B, if I can't find a viable used one, will be to create a bracket to re-assemble the critical joint I need to seal a gap with the shroud. But that will bug me, it won't be...perfect.   The water pump bolts appear to have been installed with...plumber's putty. I guess, sure, if it works...? I've found a few "backyard fixes" like that. Someone's been here before....   If I can't find someone to jam bamboo under my fingernails to fill my free time this week I think I'll install the driver's power window motor and replace the rear door speaker that's inop. I've got a genuine GM "9.5" ohm working replacement. Why GM used a non-standard resistance....nevermind. Of course they did, you can get more sound from a cheap factory amp that way.   And the saga goes on...
    • glenn27
      Different requirements for oil filters?

      By glenn27 · Posted

      // Thank you, also for your  response. More information is always good. This 2013 GMC is most likely my 'forever truck"-I'm 77 and retired...and truck only has 42K on it-very clean-so I try to keep it that way.  Tks again for your  response- glenn
    • smooth68
      Alternate wiring for Kicker sub with Bose system. (DO THIS)

      By smooth68 · Posted

      I started my install this weekend. Everything was pretty straight forward but I ran into one issue with running power through the firewall. The nipple grommet on my High Country already has a small harness running through it - has anyone else ran into this issue? And on the engine bay side, does the wire basically just penetrate the factory wiring boot? I did this on my '22 Trail Boss and it seems much easier but thats been a few years. My other thought would be possibly drilling a new hole adding a rubber grommet just to the lower left of the factory hole. Thoughts?   Has anyone used a T-harness off the Bose amp and obtained power from there? It seems a little odd that such a small amp needs 3 power leads
    • glenn27
      Different requirements for oil filters?

      By glenn27 · Posted

      ///// Ok--Thanks for that info--I could not find yesterday when I looked for the specs on that NAPA filter what I wanted. Their website is not very user friendly. I buy all teh filters for  our three vehicles once or twice a year. Have always run NAPA Gold on everything I own....I buy it thru my Son's account for his business-which he has a Heavy Equipment repair shop-one reason he uses NAPA so much-they have such a full line of coverage for just about anything/anywhere- He gets s  good discount because of volume bought. Anyway-Thank you -Sir for your response.   glenn
    • PhilB
      No 12v outlets in 2026 gmc Sierra

      By PhilB · Posted

      It is possible to add your own 12v outlet to your truck.  Check out this video:   I verified via GM Upfitters that pin 31 is the same on the 1500 trucks.  The wire is GM part number 84779405.   You can get the GM 12v outlet from Amazon  https://www.amazon.com/Genuine-Accessory-Receptacle-25774623-13549530/dp/B0F1H9YRGF EWAY 12 Volt Power Adapter for GM   https://www.amazon.com/EWAY-Chevrolet-Silverado-Cigarette-Ignition/dp/B0915RRW6Q/ref=sr_1_1?   I just haven't figured out a good place to put the 12v outlet in my truck.   Some people are getting USB-C to 12V adapters  https://www.amazon.com/WYMECT-Cigarette-Lighter-Socket-Adapter/dp/B0F87WNQKB/ref=sr_1_1_sspa? Not sure if they provide the correct amperage that a device like a tire inflator would need.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...