Jump to content

Recommended Posts

Posted

The first picture is my door trim and the second is the floor console trim. It is silver. Smooth finish. The console is black. I would say it is the same as what you have.trim wish

IMG_0183.JPG

IMG_0184[1].JPG

  • Thanks 1
Posted
3 hours ago, Frank Jr said:

The first picture is my door trim and the second is the floor console trim. It is silver. Smooth finish. The console is black. I would say it is the same as what you have.trim wish

IMG_0183.JPG

IMG_0184[1].JPG

So here's everything I think I need. What part number are the front mounting bolts? I think those are the last thing I need and I'll be good to go!

image.thumb.png.cb4d553f6e713ec966f6e3adf383363f.png

Posted (edited)

That would be 11609982  you only need 2 of them. Don't forget to get ahold of Phil for the PnP cable.

Edited by Frank Jr
  • Like 1
  • Thanks 1
Posted
2 hours ago, Frank Jr said:

That would be 11609982  you only need 2 of them. Don't forget to get ahold of Phil for the PnP cable.

Appreciate all the help Frank!

  • Like 1
Posted
1 hour ago, FourThor said:

Appreciate all the help Frank!

No problem at all. Thank Phil he was a very big help to me. His video made it happen. Plus the cable did wonders. With out it I would be scratching my head finding what wire went were. 

  • Like 1
Posted

FINALLY found time to fully install my center console. I have a 14 w the other connection, but Phil was nice enough to source my harness out my jumpseat to make my harness works. Even responded to all my texts promptly and figuratively held my hand during the install.7c872e6a0ef4ba3633108c688967ea34.jpge6800c33dc6a52fdd6a76e64ff81ce9f.jpg

Sent from my SM-G955U using Tapatalk

  • Like 2
Posted
FINALLY found time to fully install my center console. I have a 14 w the other connection, but Phil was nice enough to source my harness out my jumpseat to make my harness works. Even responded to all my texts promptly and figuratively held my hand during the install.7c872e6a0ef4ba3633108c688967ea34.jpge6800c33dc6a52fdd6a76e64ff81ce9f.jpg

Sent from my SM-G955U using Tapatalk


Anxiously awaiting my harness, Phil is very helpful.

Sent from my SM-G920V using Tapatalk

  • Like 1
Posted
Was that Q meant for me?
Yeah it got a few scratches on side.
Curious to see if they'll come out.

Sent from my SM-G955U using Tapatalk


Yup I’m new to this haha
I have the same exact scratches very annoying


Sent from my iPhone using Tapatalk
Posted
4 hours ago, 1badslv said:


Yup I’m new to this haha
I have the same exact scratches very annoying


Sent from my iPhone using Tapatalk

I believe they are from hooking up seat belt. I just put in a new one and there was no scratches at all. Yesterday My son was the first person to sit on passenger  side  since install. well he is a little handicap. Has hard time putting on seat belt. Now I have pretty much the same scratches on the passenger side. I'm going to try amoral wipes.   

Posted

Update on my center console, 2014 Chevy Silverado ltz, purchased the 23 pin varient harness from Phil Gambo, which worked great, I now have everything operational on my center console, connected green port on my hmi to brown connector on center console to power interior USB, aux, and sd card, thanks for all your help pgamboa!!

Sent from my SM-G920V using Tapatalk

  • Like 1
Posted

Quick question will a center console out of a 15/16 Silverado. Fit into a 2018 Silverado?


Sent from my iPhone using Tapatalk

  • Like 1
Posted
Quick question will a center console out of a 15/16 Silverado. Fit into a 2018 Silverado?


Sent from my iPhone using Tapatalk

It should. There hasn’t been any physical change between the years.


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...