Jump to content

Factory "Rancho" Tenneco Shocks Love 'Em or Hate 'Em/Upgraded

Sierra Dan
 Share

Factory "Rancho" Tenneco Shocks Love 'Em or Hate 'Em/Upgraded  

109 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Sinkhole Enthusiast

Sinkhole

Posted
Posted

I have a 2015 Z71 with the OEM Rancho shocks still. Still have them not because I love them, but simply because I see no need to replace them, yet. The ride is great when I compare it to my 2005 Silverado with Z85 suspension and Bilstein 4600 Shocks. When I bought my truck I drove several other trucks including an LTZ (Not a Z71) which rode much smoother on road but had a lot worse rebound on bumps. I am trying to compare my experience between my '05 and my '15 but there are a large number of variables that color the results. Tires, truck length, weight, height. All these factors will affect "ride". I put that in quotes because I think there is a difference in terms being used here. To me "ride" means the overall feel of the on-road/off-road experience. "Control" is an entirely different thing. The video posted many pages back shows nothing but a lack of "control" on vehicle driven way to fast for the conditions.  You can not expect a truck with OEM suspension to handle conditions like that at those speeds nearly as well as a truck with a suspension designed for those conditions like a Trophy Truck for example. In my experience "ride" vs "control" is a compromise. You tend to give up control for "ride" and give up comfort for "control". There are some exceptions to this but those usually involve doing more than just a Strut/Shock replacement. Also "ride" is very subjective. Person A might find a soft cushy ride unacceptable while Person B is looking for that quality. The other thing to remember is ride is not solely affected by your shocks. Tires play a large part of it, but this is not about tires. 
I personally will be getting rid of the OEM Rancho shocks when they are at life's end. I will be replacing them with either Bilstein 5100's or Fox 2.0 IFP's. Reason 1 is cost. The OEM replacement Ranchos are very expensive for what they are, and 2 I am looking for better control.

  • Like 2
  • Replies 169
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

aseibel
aseibel

I still have the Z71 stock "ranchos" and have no complaints about my ride.   I always see on this forum that the consensus from those posting is that a shock replacement makes some significa

DominatorZ71
DominatorZ71

Unless you're going to explain why you're not helping Sent from my SM-G930V using Tapatalk

truckguy82
truckguy82

Ranchos = hit a large pothole or bump = feels like you hit an 8 inch curb and someone hit your dash with a sledgehammer   bilsteins = hit a large pothole or bump = thud, the end

Posted Images

2kwik4u Enthusiast

2kwik4u

Posted
Posted

I was thinking some more about this on the way into work this morning (we were out of coffee and I had to do something to keep my mind busy for 40 minutes)......

 

The best explanation I could come up with between the two trucks I drove is that my personal truck ('15 SLT Z71) is very "nervous" over bumps, while the loaner truck ('18 LT Z71) was very "composed" over most bumps.

 

For example.....There is a left hand sweeping curve on the expressway in the morning. Large pothole on the left side of the lane right in the middle of the curve. It's got a "sharp" edge on it, is about the size of a frying pan, and is 1-layer of concrete deep. City has fixed it multiple times and it keeps coming back. My truck hits that and it hits hard. I can feel it in the seat, and steering wheel. The front and back end scoot over a shade, and the whole truck feels largely unsettled. The loaner truck would take that bump in stride. It wasn't as much of a "bang" as it was a "thud" in the feeling. It was general softer overall, and the truck remained mostly settled throughout the impact.

 

The constant "banging" and "nervousness" of my truck is what I'm looking to eliminate. I want a nice "composed" ride. I want it to take the hits, but continue on it's intended path, and reduce some of the impact into the cab. The plan is to find some softer sidewalled tires, and a new set of shocks and see where that gets me.

Sierra Dan Senior Enthusiast

Sierra Dan

Posted
  • Author
Posted
43 minutes ago, 2kwik4u said:

I was thinking some more about this on the way into work this morning (we were out of coffee and I had to do something to keep my mind busy for 40 minutes)......

 

The best explanation I could come up with between the two trucks I drove is that my personal truck ('15 SLT Z71) is very "nervous" over bumps, while the loaner truck ('18 LT Z71) was very "composed" over most bumps.

 

For example.....There is a left hand sweeping curve on the expressway in the morning. Large pothole on the left side of the lane right in the middle of the curve. It's got a "sharp" edge on it, is about the size of a frying pan, and is 1-layer of concrete deep. City has fixed it multiple times and it keeps coming back. My truck hits that and it hits hard. I can feel it in the seat, and steering wheel. The front and back end scoot over a shade, and the whole truck feels largely unsettled. The loaner truck would take that bump in stride. It wasn't as much of a "bang" as it was a "thud" in the feeling. It was general softer overall, and the truck remained mostly settled throughout the impact.

 

The constant "banging" and "nervousness" of my truck is what I'm looking to eliminate. I want a nice "composed" ride. I want it to take the hits, but continue on it's intended path, and reduce some of the impact into the cab. The plan is to find some softer sidewalled tires, and a new set of shocks and see where that gets me.

You will have a planted, composed ride with Bilsteins or any other Monotube type shock.

Btw, Welcome to the site and Club 2kwik4u  :thumbs:

2kwik4u Enthusiast

2kwik4u

Posted
Posted
13 minutes ago, Sierra Dan said:

You will have a planted, composed ride with Bilsteins or any other Monotube type shock.

Btw, Welcome to the site and Club 2kwik4u  :thumbs:

Thanks for the welcome, and the vote for some monotubes.

 

Been lurking for 18mo or so. Just recently started being more active here. 

  • 1 year later...
mdreynolds Enthusiast

mdreynolds

Posted
Posted (edited)
On 8/28/2018 at 11:28 AM, Sierra Dan said:

This Brand new Off Road Sierra AT4 truck has seemingly the same Ranchos as our current K2's

Notice the Bounce and out of control body roll?  Look familiar ?

I want to see GM offer a better shock off the factory line for such a cool, smart targeted Package in the AT4 and Trail Boss

 

 

https://www.youtube.com/watch?time_continue=3&v=jgvVs3RZQuI

My understanding the shocks on your 2016 along with all the 2019 and 2020 Z-71/X-31 have twin tube Ranchos, the TrailBoss/AT4 have Monotube Ranchos.

Not knowing the difference in shocks at the time, But with driving the 2020 Sierra SLT with Z-31 then the Sierra AT4, the AT4 was definitely a bit better, even my wife that doesn't know the difference between a Shock and a Spark Plug even chimed in that the ride on the AT4 was better. At that time is when I researched and found the different style shocks used.

Edited by mdreynolds

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Buckwild27
      Gas Prices

      By Buckwild27 · Posted

      I agree. 
    • Atlas
      Gas Prices

      By Atlas · Posted

      87 down as low as $5.14 here... winning!
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Progress... sort of.   Intake is disassembled, spider is out, fuel lines removed. Used a torch on the stripped screw with the lower intake off, much easier when I've got the intake sitting on my workbench, I made it talk. Walked right out with a pair of vice grips once it was nice and toasty hot.   New parts are piling up on my service cart waiting to be installed. Distributor, temperature sensor, new gaskets, fuel line kit, themostat, water neck.   My new pickle is I don't want to spend $600 on a replacement spider. I'm not sure IT is bad. I'm probably splitting hairs. Or it's $300 to send mine away and another 3 weeks of the truck just sitting. I have half a mind to assemble everything with the old spider to see if I can get away with just replacing the fuel pressure regulator to be safe. The obvious issue was the gushing high pressure fuel line which will be replaced. Getting to the spider really isn't that hard, and now I know what I'm doing , swapping it would be a breeze should it absolutely need one. Stupid, or smart?   The part that gives me pause is replacing the distributor. Well, it's already out. And I didn't mark it, whoopsie! Engine was at TDC when I removed it, I know that, so upon correct reinstall the metal tip on the rotor should point to the TDC mark on the distributor because that's where it was pointing on the old distributor. Worst case I'm a tooth off and have to re-stab it.   But then, what? I assume the truck will start. It doesn't appear the timing can be set. Here's the problem: These distributors can't be rotated but a degree or two, by design. What I read is Cam ****** needs to be -2 to +2 degrees, ideally at 0 (and checked/set above 1000 rpm). There should be enough wiggle to get that properly set, but checking the reported value is another potential issue. My Actron 9185 scanner says it supports enhanced GM PIDs and Cam ****** is one of them but it's unclear that I'll be able to correctly see it over OBD 1.5. I can see why people end up junking these things with life left in them. They're an absolute nightmare with tweener-year diagnostics/electronics and unobtanium parts.   Fingers crossed it starts and idles nicely. There can be hope, right? I'ma buy a lottery ticket the same day just in case.   Next steps..DO IT. I have not installed an intake before so I've been reading and watching a lot. Some say NO RTV except on china walls, some say DO RTV on water ports but not fuel/air intake. 1/4 or 3/8 bead on China walls? I think my strategy will be, obviously, RTV china walls with overlap on the gasket corners. Chapstick-style RTV the water ports. Leave intake ports dry. The only set of intake gaskets I could find locally are Edelbrock performance gaskets (uh...for an asthmatic 190hp V6? LOL) so we'll see how they do.   #NoToolLeftBehind. It took an hour, but my recovery mission for my deep 10mm socket was successful. It had rolled down the bellhousing and wedged itself between what I think are the fuel lines? I couldn't see it at all, but with a junk antenna I had laying around, I blindly went poking/sweeping for it, heard it clink, raised the truck, and caught a sliver glimpse of chrome with a flashlight way up there in Narnia. I had pushed it farther along the lines holding it captive, but within access of severely improvised tools, poking and cursing at it to finally knock it free to where I could get a fingertip on it to bring it home.    Not much to see.      
    • RyanbabZ71
      Gas Prices

      By RyanbabZ71 · Posted

      Thats crazy considering im right next door (Indiana)
    • Black02Silverado
      New Retail & Commercial Promo

      By Black02Silverado · Posted

      For a limited time, retail and commercial accounts receive an AMSOIL Vinyl Tool Tray with their order of $500 or more when they use code TRAY726 at checkout. The promotion runs through July 21, 2026.   Order at https://syntheticadvantage.com   Want to use AMSOIL in your business or sell at your store, apply here.  https://www.amsoil.com/business-opportunities/?zo=521390  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...