Jump to content

Recommended Posts

Posted

Wow this thread it super depressing. If I was y’all I’d just go for the solid widow replacement option. I had the opening window in my 2016 but, don’t miss it a bit on my 2020.


Sent from my iPad using Tapatalk

Posted
Wow this thread it super depressing. If I was y’all I’d just go for the solid widow replacement option. I had the opening window in my 2016 but, don’t miss it a bit on my 2020.


Sent from my iPad using Tapatalk


That’s exactly what I’ll do when mine leaks.


Sent from my iPhone using Tapatalk Pro
Posted

The thought that we should eve have to change the sliding rear window for a solid one is  ridiculous. I have not used the slider in mine but I still would easily give it up. What about resale value? I personally have just had my first (and hopefully last) repair. I waited a month for a replacement glass. If it continues to leak I will look at trading it in. 

Posted

I'm going to let them replace the window first and if it leaks again I'm going to try that tube caulk that someone posted on here. I've already contacted the company for a sample box and if I like it I will just slide that into the gap of the spoiler so no water even gets to the glass.

 

 

Posted

As one who has had a leaky rear window for about a year now, I really do enjoy the benefits of opening the rear slider during these beautiful fall days we're having here in Texas. I'm glad to have the slider, even if it still drips sometimes when it rains. ? 

  • Like 1
Posted

I just took my 2019 in for a rear window leak.  They told me it was the high mount stop light.  They resealed and will check it tomorrow.  (I know i have seen this mentioned before, but didn't want to go through 19 pages of posts as my computer is very slow loading).  Anybody think there is a chance that this is the cause.  Dealer said there was a TSB on it.  Just curious what you guys think.

Posted
45 minutes ago, Ratchetarms said:

I just took my 2019 in for a rear window leak.  They told me it was the high mount stop light.  They resealed and will check it tomorrow.  (I know i have seen this mentioned before, but didn't want to go through 19 pages of posts as my computer is very slow loading).  Anybody think there is a chance that this is the cause.  Dealer said there was a TSB on it.  Just curious what you guys think.

Very unlikely it’s just the spoiler or brake light leaking, IMO. 
 

If those were common areas of leaks, how come nobody in 169 pages has had those leaks with a solid rear window truck? They all have the spoiler, but somehow only trucks with the slider make it into this thread. Says it all, right?

 

Not aware of any TSB aside from the one telling them to caulk your window frame.

  • Like 3
  • Thanks 1
Posted
8 hours ago, OnTheReel said:

Very unlikely it’s just the spoiler or brake light leaking, IMO. 
 

If those were common areas of leaks, how come nobody in 169 pages has had those leaks with a solid rear window truck? They all have the spoiler, but somehow only trucks with the slider make it into this thread. Says it all, right?

 

Not aware of any TSB aside from the one telling them to caulk your window frame.

1000000000000x correct !!! 

Every time someone new comes to this thread it seems like the same story. "window leaking, dealer said it's the brake light, nothing to worry about, we'll reseal it, move along"

Does it not seam odd that GM is telling dealers to tell customers it is just the "spoiler" or "3rd brake light" or "window seal" to de-escalate fears or attempt to calm customers AND not admit that the window frames are actually cracking. Even if you look at all the service orders when they do the repair, it says "found window leaking, sealed or replaced window per TSB". They won't put the words "cracked window frame" in the receipt they give you. Why? We have seen these cracks in this thread. They have either found no way to stop it or refuse to look into it. It doesn't take over two years to solve why a plastic item is cracking if you wanted to solve it. If someone can prove this wrong or if GM was willing to be transparent about it, I will happily eat crow. But it has been two years. Everything @OnTheReel said is accurate.

Don't take my words above as me hating on GM. I love my truck sans the leaking issue. Just be honest and transparent, it is not hard. It is what we teach our children. 

 

 

image.png.c7498b83fff6c5e604d04cd4043dd582.png
 

  • Like 5
  • Thanks 1
Posted (edited)
13 hours ago, Ratchetarms said:

I just took my 2019 in for a rear window leak.  They told me it was the high mount stop light.  They resealed and will check it tomorrow.  (I know i have seen this mentioned before, but didn't want to go through 19 pages of posts as my computer is very slow loading).  Anybody think there is a chance that this is the cause.  Dealer said there was a TSB on it.  Just curious what you guys think.

Yeah, he's blowing smoke up your tailpipe to be honest. Like the previous people have said a lot better than I can.. it's the window frame and GMC for some reason or another just isn't owning up to it. I'm right now emailing the person I've emailed and talked to on the phone what my service was just like and what is happening and I am sure going to mention this to them as well.

Edited by Dali555
  • Thanks 1
Posted

Thanks, Dali555. That's what I thought. I appreciate your opinion. I will see what happens today when they do another water test on it. Frustrating!

Posted (edited)
4 minutes ago, Ratchetarms said:

Thanks, Dali555. That's what I thought. I appreciate your opinion. I will see what happens today when they do another water test on it. Frustrating!

When you go back to the truck, be the biggest pain in the ass you can muster up and check every little inch to make sure they didn't mess anything up like scratches in the plastic trim on the inside pillars, happened to me, or scratches in the paint.

 

Be very diligent!

Edited by Dali555
Posted

Thanks, econometrics and onthereel. I hadn't recalled that resealing the spoiler or stoplamp had actually fixed it for anyone. 

  • Like 1
Posted
5 minutes ago, Dali555 said:

When you go back to the truck, be the biggest pain in the ass you can muster up and check every little inch to make sure they didn't mess anything up like scratches in the plastic trim on the inside pillars, happened to me, or scratches in the paint.

 

Be very diligent!

Will do. Thanks for the advice!

  • Like 1
Posted (edited)

169 pages is a lot of reading...I see a lot of theories and guesses about the source of the leak.  If you're confused by your dealership your service department isn't communicating well or they don't know or don't care.  It's simply a poor design of the window frame, you did nothing wrong by driving normally and you can't prevent it by avoiding hot or cold weather or opening your window.  There is a long, thin, flat and hard piece of plastic which is the "setting channel" for the window to body adhesive.  It's too long and is not designed properly for thermal  expansion and it cracks in the weakest spots on the top corners.   It hasn't been fixed.  Case closed.   Can we sticky my photos or my detailed posts about removing the sliding window and installing solid rear glass? 

IMG_2844 (1).jpg

IMG_2847 (1).jpg

IMG_2842.jpg

IMG_2843 (1).jpg

Edited by Leevon
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,791
    Total Members
    8,960
    Most Online
    d.lowrey
    Newest Member
    d.lowrey
    Joined
  • Who's Online   5 Members, 0 Anonymous, 2,287 Guests (See full list)


  • Latest Articles

  • Posts

    • Just did an injector/HPFP replacement on Pepper at 192,400 miles; close enough to 200K, RIGHT? (If 200K is considered life end and to me it isn't). But hey, to each his own.    Have never run a catch can on this vehicle. Back side of every valve looked like a new valve spray painted semigloss black. Port walls looked 'neat' (all a normal result of passive EGR via VVT) Zero build up even in AFM cylinders. Just color. It uses no measurable oil and never has.    At 155,000 I put her on E-85 and a borescope of the cylinders at plug change showed very clean pistons and valve faces. The replaced injector tips looked new. (It was the pump piston seal that was leaking). Oh well, have six good backups.    Still gets 28 mpg on gas (highway average) and over 20 (highway) on alky. UOA's look good and runs as good now as it did when I bought it. Better in fact.    What improvement would a Catch Can provide this motor?     And given all this I expect that IF I installed one I'd see some water/gas/oil vapor accumulation. Byproducts of normal combustion.   Having said that, IF my motor used an appreciable amount of oil I'd consider it a useful 'crutch' until I had the situation corrected OR if bore polished, until I junked it or rebuilt it to stave off repeated plug fouling.    I'm not telling you what I THINK. But what its DONE.          
    • Love the look. I'm a SCSB lover myself.    Two items. 1.) A spacer changes scrub radius but this also changes when we use wheels of different offsets. A little isn't a big deal. 2.) Steel wheels, alloy wheels all have different thickness. Same effect on the stud and lug nut as a spacer. When hub centric the wheel isn't supported by the stud. It's supported by the hub. The stud just keeps it all together.  
    • I had a evap sol go bad a couple weeks ago. . I replaced it.  While watching live data at the time I saw I had some cylinder 1 misfires. No MIL but on live data I could see ~50 at startup and about 70 more after an hour a drive all on cyl 1.  I also noticed that the LTFT were -5% to -15% always.  And that bank 2 is always -3% richer than bank 1. Even across all driving modes, city, highway, etc it’s always 3% richer than bank 1. So I start with the misfire. Swapped coil, plug, and plug wires from 1 to 3. No follow. I got an Injector reseal kit, pulled the D/s injector rail, swapped #1 and #3 injectors, resealed them, reinstalled and retested.  The misfire followed to 3. So I ordered and replaced all 8 injectors, spark plugs, and plug wires. Also replaced the 1 time use fuel pipes under the intake manifold.  Injectors that were in the truck since new were  Part # 12668390.  I replaced them with # 12742701 Got from RockAuto. Pretty certain they’re genuine and the correct ones. I called a friend at a parts store who told me “the 12742701 were the correct superseded part # for the originals I was replacing”. So started truck after replacing all that and it’s running -15 - -30 LTFTs. I reset the fuel trims with GDS2 and drove it for a 60 miles trip each way. There have been no changes in the LTFTs.  I checked if the HPFP was leaking into the crankcase. I removed the pvc and watched the trims. No difference.  I checked the alcohol content and it was at 10%  I’m out of ideas here. Truck seems to run great. Just always rich on the fuel trims.  Anyone with any help or ideas would be greatly appreciated.  I ran an injector balance test just for the heck of it and it came back this. I’m confused.  I have gds2 and some other diag tools if anyone knows of anything I should test next.
    • Definitely needs to go back to the dealer. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...