Jump to content

Recommended Posts

Posted

What version is on your infotainment system? When mine was at V805 i didn't have any issues with my aftermarket system. As soon as it updated to V807, my focal amp died. Just curious if this is more of a GM problem then with my aftermarket equipment.

Posted

I'm not sure of my version, will need to check.  I have a 2020 AT4.  NavTV people said they haven't had a chance to update everything, said it was the NAVTV unit though rather than the GM software.  They recommended my installer put in the rocker switch for a reset and that is a work around.  Before that was installed there was no sound and no fix without going back to the installer.  

Posted
20 hours ago, GarretAK said:

I'm getting my JL VX amp installed tomorrow, so hopefully no more issues for me.

If you can get the installer to provide pics of everything, that would be great.  What did you decide on the Fix82?  I'm very interested since I'm hoping to do something similar to my '19 Sierra Denali w/factory Bose.

Posted (edited)

Glad to see people using and abusing all the info here. Unfortunately, audio is one of those topics that information should be taken with a grain of salt. What I have learned is that everyone's taste is subjective, their knowledge varies, experience affects opinion, expectations are different, and not everyone is as open minded as they appear. Always 'trust but verify' an opinion that is given to you and then make your own judgement call. There are many people (especially audio forums) that will given you a recommendation which may be solely based on something they read somewhere on the internet. While it may turn out to be true, you need to be sure of that before you commit.

 

For those of you that are new to this, try not to be overwhelmed by the little stuff. Car audio guys can be super OCD regarding wires, installation, and imaging. That's fine, to each their own, but it throws so many of the invested folks off because you start this project thinking you'd only spend X and should get it installed pretty quick. Next think you know you're trying to figure out what wires are going to have the least amount of interference or which screw is the best one to use for X. Do yourself a favor and try not to get caught up in that. You will rabbit hole really quick and it really isn't worth it. As long as you don't go super cheap and you did your own research on the stuff, the little stuff shouldn't make you bash your head in because the stuff that most audio guys fuss about is either nonexistent (no real proof) or it's for someone with a much higher expectation than the average user.

 

You don't need $5000k to have a great sounding system but you also need to adjust your expectation to fit your budget. The one thing I have experienced in all of this is being able to see how big of an impact a good tuner can impact a system. Sage at Sounds Good Stereo is one of those people with "the ear" and he can make a budget system sound absolutely phenomenal with just a DSP. A good DSP and the right person to tune it (the right tuner is the really key component here) will allow you to extract so much more from a system without. At the end of the day, YOU need to be happy with your system. Sadly, I feel like I am constantly messing with it on a monthly basis because it "sounds off" and I really just think it's aging + losing it. 

 

Just wanted to chime in and leave some information since I haven't been on here in a while. I left some recommendations revolving around DSPs as I had gotten some questions about them and I really think they aren't given enough credit because of their steep prices. A DSP can not only last you a very long time but it adds a ton of flexibility that can also help make the process of changing/upgrading speakers, changing/upgrading amps, or changing vehicles much easier. There are reasonably priced DSP options that many people have lots of success with so don't let the price of the higher end DSPs scare you off completely.

 

Also throwing in some pictures of my back wall since I saw some posts asking about how everything got laid out.

 

DSP Tuner Recommendations

  • Sage @ Sounds Good Stereo (Nashville, TN)
    • Sage has worked on mine and I have also listened to their SQ competition car.
    • All ears so you have to go to him
  • Nick @ Apicella Auto Sound (Stony Point, NY)
    • Highly respected in the car audio world and plenty of people/videos/posts to back him up
    • Can do remote tunes to get you setup. Taking it to him would yield better results but should be more than enough for most.

 

Common DSP options are:

  • Helix DSP 
    • Mini (6 channel)
    • DSP.2 or DSP.3 (8 channel)
    • Pro Mk2 (10 channel)
  • Mosconi DSP
    • 4to6 (6 channel)
    • 6to8 Pro or 6to8 Aerospace (8 channel)
  • JL
    • TwK-88 (8 channel)
  • miniDSP
    • C-DSP 6x8 (8 channel)
    • C-DSP 8x12 v2 (12 channel)

 

 

20191229_155152.jpg

20191229_155158.jpg

Edited by Ericruiz911
  • Like 1
Posted

Got everything done with yesterday. Unfortunately they did not take a pictures. I have spent the last several hours throwing every type of music i can at these subs with the new VX amp. Have not had a single hick up yet. I am ecstatic with the sound system again. It could have just been a bad JL 750 HD amp. But since i moved up to the VX1000 i am beyond happy.

Posted

So here is what I am thinking about

Hybrid Audio Technologies Unity 6x9 shallow midbass $400
Hybrid Audio Technologies Unity 3.7" wideband $200

JL Audio VX1000/5i $1300

Navtv interface $600

MTI dual 12" sub box with 12w3 subs $1100

Install hardware / sound dampening $300~

I am planning on toslink cable from the NAV TV interface into the amp and then running the front stage active 2 way with the internal DSP on the amp.

I think all in all it will come in about $3400 for everything

Posted

What’s everyone doing for their tweeter mounting points? Gonna use my trump bucks to upgrade the factor speakers and then install my amplifier. Looking at 6.5 components for front/rear

Posted (edited)
On 4/4/2020 at 2:06 PM, GarretAK said:

Got everything done with yesterday. Unfortunately they did not take a pictures. I have spent the last several hours throwing every type of music i can at these subs with the new VX amp. Have not had a single hick up yet. I am ecstatic with the sound system again. It could have just been a bad JL 750 HD amp. But since i moved up to the VX1000 i am beyond happy.

What problems did you have with the hd750/1 I’m having issues with mine in my at4. I’m to the point of selling my complete JL stealthbox and amp and starting over. I have a stealthbox and hd750/1 and LC2i everything else is oem. The signal to the stealthbox is terrible would adding a DSP fix this or a different loc? I paid a Best Buy installer off the clock to install everything works as it should but sounds terrible for the money I paid for amp and enclosure should sound great. Any help would be awesome thanks. 

Edited by Jon coulson
Added more info.
Posted
2 hours ago, Jon coulson said:

What problems did you have with the hd750/1 I’m having issues with mine in my at4. I’m to the point of selling my complete JL stealthbox and amp and starting over. 

The 750/1 kept clipping and shutting off. The VX amp works way better than the hd amp did. 

Posted
15 minutes ago, GarretAK said:

The 750/1 kept clipping and shutting off. The VX amp works way better than the hd amp did. 

I’m not having that problem. I think the lc2i is wired wrong looks like he took signal from the rear door speakers and not the factory subwoofer so the signal going to the subs is full range they are playing music and not just bad like they should. I need to access the oem

sub wiring and try to rewire the loc.  If wired from oem sub should only be one set of inputs?

60FFDE05-CCE8-4BE9-9124-EAE9D90C1D29.jpeg

Posted

the xv amp doesn't need the LC2i. I believe the rear speakers are the ones to tap into on the newer systems. 

 

Thats one reason i stepped up to the VX amp is so i wouldn't have to mess with the LOC or nav tv.

Posted (edited)

You can split the subwoofer signal and use both inputs on the LC2i. The rear doors are the worst place to get signal from in these trucks(and most GM's for that matter).It's not full range I guarantee that.Probably bandpassed from like 150hz to 2000hz. I'd like to get into one of these and go through the outputs with a DMM and test tones just to see how Bose sets up the processing in that amp.

Edited by JH1973

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I would have to read back to get a better picture in my mind of some of the other comments and what they were using for a driving scenario they based the fuel mileage off of. That is why the fuel mileage conversation is extremely difficult to make fair comparisons from. If I was to be living in town and only driving around town, light to light and some longer stretches that doesn't have a light every block, and the usual stop at a grocery store and the bank and so on and so forth, my fuel mileage even during the summer time would be so bad with my truck I don't even want to know how bad it would be !. Then add in winter time and idling to warm it up to clear the windows and driving through snowy streets etc, large heavy trucks with gas engines have NEVER been worth crap for fuel mileage and why some little pot licker of a car with wheelbarrow tires and a 1300 cc four cylinder non turbo engine was the ticket to using a mere fraction of the fuel over a full size pickup.    By the way my truck has the 34" tires as its a HC but not the BFG KO3 tires ( that was an option for my truck but the sales guy couldn't figure out what the tires actually were so that never got on the order until it was too late to change the truck order ). So what fuel mileage your getting actually sounds good for "town driving" and with my truck when I go to town the fuel mileage keeps increasing as I get closer to town because it takes quite a while to get the driveline oils warmed up ( and why it always shows better fuel mileage on the return trip from town because its already warmed up ) but once I am in town that fuel mileage average just keeps dropping the more I mess around town and then has to recover back to something reasonable again by the time I get home for an over all average.    I'd be curious what your sticker says for the factory weight of your truck, mine is close around that 7700 lb due to the options it has. But anyway the long and short is, vehicle weight, higher rolling resistance heavy tires and a hefty driveline and a relatively large gas engine make for crap fuel mileage in stop and go scenarios, all one can do is drive it easy off the line at each stop and as my dad had said over the years, drive like a raw egg is under your foot and that's the best one can do. Years back with a carbed engine and if the carb was getting a bit out of tune etc as would the ignition system, the fuel mileage on pickups with larger engines was just awful compared to what your getting. We pay the fuel price penalty for driving HD trucks over some little vehicle, that is the reality. 
    • We had two Toyota’s with that engine in the mid 80s. We had 50 gallon fuel tanks, a toolbox full of tools, an air compressor and assorted parts for our equipment. We beat those up and down pipeline ROWs until we started buying diesel trucks. Then they became parts runners and first vehicles for our teenagers first cars. Our shop Forman wrecked them both two years apart when we hired him out of high school as an apprentice. Good thing he’s an excellent mechanic. It took awhile before he could be called a good driver.
    • I have a 2025 GMC Canyon Denali.   On a trip recently the engine failed.  The dealership diagnosed a bent valve and says there is a service bulletin that indicates to 'relace the engine'.  The truck only has about 14K miles and is under warranty.   The failure occurred 5/11/2026.   So far I have worked with GM Customer Assistance and Roadside Assistance.  Evidently no engines are available and nobody will offer a date when a new one will be.   Coming up on two months with no repair or timeline and no loaner from the dealership.   GMC Customer Assistance is 'ghosting' me and keeps closing the cases I've opened with no resolution.   Hoping someone can help me on how to escalate this issue.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...