Jump to content

Recommended Posts

Posted (edited)
On 12/6/2019 at 3:52 PM, SamDSJR said:

My configuration is 11,400lbs. 2019 5.3 w/Max Tow, 3.42, 4x4, 8-Speed tranny, Crew Cab Short Bed, 18" rims.

 I also have the Max Tow/NHT 2019 Sierra Elevation.

The ride is definitely more firm in this truck compared to my last truck, 2007 Silverado Z71.  Last truck had original shocks in it that were probably quite worn out and helped with the “soft ride”.

I equate the ride in my current truck to perhaps how a 3/4 ton would’ve felt 10-15 years ago.  The rear end does feel “bouncy” hitting bumps at speed.

I’m also running BFG KO2’s that are an LT tire on 20” rims and a leveling kit up front.

I’m sure that doesn’t help with the ride either!

I’m curious as to how this truck will handle my 24’ TT next spring.  My last truck felt very “floaty” while towing, where this one I’m thinking will be more “solid”.

 

What is everyone’s opinion on the Max Tow/NHT suspension and ride quality?

Would Bilstien 5100 improve the day to day ride quality?

Edited by madconcept
Posted
20 hours ago, Snuff said:

Yes - I am going to run stock springs and see how it goes.

do you know what stock spring rate is for 19 silverados?...….700lbs?

 

 feels ike it has no dampening in stock shock and springs are doing most of work on stock silverados….

 

I may just go this route over kings, idk for my purpose eibachs probably be good fit, kings maybe overkill for me...and don't know how much nicer they would be,.plus eibach is only 20min away and can just go there and have em do it....they have good reviews for daily driver with minor offroad use....

 

what is labor cost generally to have 4 shocks installed.....I could probably do it myself but don't have space 

Posted

I just recently installed the new Eibachs and they have made a dramatic improvement over the stock front shocks. I already had Rancho adjustable 9000's on the rear for a few months and felt the difference between front and rear on large bumps especially at higher speeds on freeway bridge transitions. The 305/55-20 Dick Cepek Trail Country EXP tires are much heavier and stiffer  (62lbs vs. 41) than stock tires so the front would bounce uncomfortably at times. The new shocks don't do that and feel smoother on smooth roads and a little rougher on bumpier roads, but not too rough. Over driveways and speed bumps they actually feel smoother and the truck doesn't bottom out or bounce up and down. I had and kept on a Superlift 2' leveling kit on front and set the new shocks to the second to the highest setting for a 3" total lift in front. So with the 2 inch rear blocks the truck measures 41" high all around. The truck used to rock side to side if you jiggled the steering  wheel and felt like my old overloaded service van rocking when it did that. that too is gone.

  • Like 2
Posted

I had 5100’s put on my ‘15 Ford FX4 Lariat. They made a HUGE difference. However; the Ranchos on my TB LT are excellent and feel as well, if not better, than the 5100’s on my Ford. I will not be changing to Bilstiens this time. 

  • Like 3
Posted

It aligned fine and they added some caster according to the results sheet. I'm sure both control arms are somewhat droopy, but I really don't feel any abnormalities in the handling. It's a marked improvement over stock. 

  • 3 weeks later...
Posted

I really hope these are released soon.  I loved them on my '18, lots of improvement.  My '19 Trail Boss has larger tires, and after about 13,000 miles it feels like I have a blow front shock.   Ranchos are not great, they could do MUCH better with factory options IMO.  

Posted
On 8/15/2019 at 12:38 PM, Sin City Trail Boss said:

Interesting.

 

How will the 5100s compare to my stock Z71 Rancho shocks that come with the Trail Boss?

 

 

 

 

If the 5100s work like the ones I put on my 2014 will loose any ride quality the truck came with. Very happy with the way the truck rides now. Keeping mine stock happy camper here.  

  • Like 1
Posted

All,

 

I reached out to Bilstein for an updated date now that we are into the new year.  Their response.....

 

"We are estimating by the end of 2nd quarter"

 

And the wait continues........

  • 1 month later...
Posted

The rear Bilstein B8 5100 shocks are now released.  I just bought a pair and put them on my 2019 Silverado RST Z71.  Made a big difference just having them swapped out on the rear.  I bought Bilstein PN 24-293471. The fronts are not yet available. 

  • Like 1
Posted
4 hours ago, GM Niner said:

The rear Bilstein B8 5100 shocks are now released.  I just bought a pair and put them on my 2019 Silverado RST Z71.  Made a big difference just having them swapped out on the rear.  I bought Bilstein PN 24-293471. The fronts are not yet available. 

does it ride stock height? or are you lifted?

  • Like 1
Posted

I run stock height.  I believe the PN 24-293471 is good for 0 to +1" on the RST.  If you go to Bilstein's website and look up your truck, it shows PN 24-309516 for a Custom Trail Boss (which has a stock 2" lift), and also says it's good for 0 to +1".  So if your truck is lifted it may be best to contact Bilstein for your best option.

Posted (edited)

rears have been out for awhile.....lot of kits come with them, I don't think they are any different than 2018 in rear cuz am pretty sure someone has already swapped his out from last gen to new gen

but yeah.....idk wtf takes a company almost 2 years to come out with product.....i think fox too in 2.0 aren't out

Edited by Dunn

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Sure, but they do have some affordable options like the Trax, Trailblazer, Envista, and Encore. Some of these have a cheaper base price than the Civic, though the fuel economy isn’t as high. The main problem is that people WANT the highest trim with all the goodies and finance for like 7 years. That’s how ppl “afford” the more expensive vehicles. 
    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...