Jump to content

Recommended Posts

Posted

for what it is worth my best 25 mpg is 23.8, best 50 is 21 and my best 400 is 16.7.  I have 3500 miles on the truck.  The best 25 and 50 were both on a recent trip that was mostly country roads with speed limit of 55.  Mix of flat and hills.  Pretty good IMO with the trailboss (2in lift, duratracs and no front chin spoiler).

 

I haven't gotten enough miles to get a good 400 mile trip that didn't have a lot of idling and stop and go.  We went from winter to 90 degrees last week and with C19 I haven't been going anywhere for the previous 10 weeks (work commute is 2 miles).

Posted
14 hours ago, Mikedfw said:

You didnt word it wrong, that's one of the many reasons this thread is so crazy.

That's not the only reason. Some people are trolls, some people respond too much to trolls, and others are just dedicated to this subject. Also, did you mean to say didn't or did?

Posted

There is a great deal more to a motor being Better than the most powerful.

 

GM's very own Gen1 'Mouse' motor for example. 100,000,000 made. Let that number sink in a minute. ONE HUNDRED MILLION!

 

In race trim exceeding 2,000 hp. Well though out tune will net upper mid 20's mpg numbers. Anyone can work on one and you can still buy them new. It will be a while before the Ecotec3 reaches that feat. Many thought the LS would....yea....not

 

The GM 3800 series 3 is a Better Motor than the 6.2 almost equal in accomplishments to the Mouse and more durable. Perhaps GM's finest work...

 

The Gen 1 400 CID was never as good as the 350. Lack of a full water jacket hurt the cooling layout. The 327 would outlast a 350 generally and was more flexible. 

 

Being large and powerful is not a bad thing, it just isn't the only thing.

 

Well unless "most powerful' is  your only criteria. If so buy a Ford 3.5 V6...   450 HP over 500 lb/ft.

 

What do you know about these two motors you haven't read? All you know is they are 'different' in power and 'alike' in construction... sort of.  Ask this question 40 years from now. After you decide what BETTER means. 

  • Like 1
Posted
That's not the only reason. Some people are trolls, some people respond too much to trolls, and others are just dedicated to this subject. Also, did you mean to say didn't or did?
Didnt. I was saying that your post was worded fine, it really isn't confusing at all, but people are making it that way for no apparent reason.

Sent from my SM-N960U using Tapatalk

  • Thanks 1
Posted
There is a great deal more to a motor being Better than the most powerful.
 
GM's very own Gen1 'Mouse' motor for example. 100,000,000 made. Let that number sink in a minute. ONE HUNDRED MILLION!
 
In race trim exceeding 2,000 hp. Well though out tune will net upper mid 20's mpg numbers. Anyone can work on one and you can still buy them new. It will be a while before the Ecotec3 reaches that feat. Many thought the LS would....yea....not
 
The GM 3800 series 3 is a Better Motor than the 6.2 almost equal in accomplishments to the Mouse and more durable. Perhaps GM's finest work...
 
The Gen 1 400 CID was never as good as the 350. Lack of a full water jacket hurt the cooling layout. The 327 would outlast a 350 generally and was more flexible. 
 
Being large and powerful is not a bad thing, it just isn't the only thing.
 
Well unless "most powerful' is  your only criteria. If so buy a Ford 3.5 V6...   450 HP over 500 lb/ft.
 
What do you know about these two motors you haven't read? All you know is they are 'different' in power and 'alike' in construction... sort of.  Ask this question 40 years from now. After you decide what BETTER means. 
Ok, so this post was asking to compare a 5.3 liter v8 made by gm to a 6.2 liter v8 made by gm.

All these other engines are irrelevant, I'm not saying that there are no engines better than the 6.2 and I dont know where you got the idea that is what was being discussed.

Again, comparing these two specific engines, power is the primary difference.

6.2 has more power, better acceleration, better passing power, better at higher altitudes (due to having more available power), basically the same towing and mileage, reliability about the same. How is it not the better engine? What differences are there between these two specific engines that makes you think the 5.3 is better than the 6.2 or at least, what makes you think that being better in this specific scenario is about anything other than power?

Again, if we are talking value or comparing to a diesel engine, then you would have a point, there are other factors involved then, but these are two engines made by the same company for the same purposes, one just does everything the other can do, but with less engine strain, or faster.

Sent from my SM-N960U using Tapatalk

  • Like 2
Posted (edited)

I think the ls7 is the best...

 

 

For those of you that think premium isn't required. I experience audible pinging all the time at part throttle running empty going up hills. I've only ever used shell 91, I'm now trying esso 91; but it did the same thing today. Only option left is 94 octane from different stations. But neither company is top tier and aren't considered to provide quality fuels.

 

I'm also 3000 feet above sea level. Wot no audible knock, just part throttle with slight load. Scares the ****** out of me, because it does not stop unless it downshifts. And honestly, I think the majority of people on hear have no idea what spark knock sounds like and it happens to them all the time.

 

Edited by M1ck3y
Posted
1 hour ago, M1ck3y said:

I think the ls7 is the best...

 

 

For those of you that think premium isn't required. I experience audible pinging all the time at part throttle running empty going up hills. I've only ever used shell 91, I'm now trying esso 91; but it did the same thing today. Only option left is 94 octane from different stations. But neither company is top tier and aren't considered to provide quality fuels.

 

I'm also 3000 feet above sea level. Wot no audible knock, just part throttle with slight load. Scares the ****** out of me, because it does not stop unless it downshifts. And honestly, I think the majority of people on hear have no idea what spark knock sounds like and it happens to them all the time.

 

If you're knocking on 91 octane, you've got other issues going on. Bring it in. I experience 0 knock with 87

Posted
2 hours ago, Mikedfw said:



Again, comparing these two specific engines, power is the primary difference.

 

Your really have not idea what that word means, do you?

 

BETTER  

 

This isn't philosophy; this is English.  Better: Etymology Old English bettra, earlier betera "of superior quality or excellence," from Proto-Germanic *batizo

 

It has nothing to do with POWER. It has to do with excellence and quality. Does that need to be defined as well? 

 

I didn't ask the question, the OP did. His word, not mine. Difference in and of itself does not make a thing better.

 

How does the 6.2 EXCEL in QUALITY compared to the 5.3?

 

It doesn't

 

 

Posted

I can end this argument once and for all. The Silverado is the best looking truck on the market. Having a 5.3 or a 6.2 doesn’t make a difference. You all gonna get massive amounts of pun tang thrown your direction for just its looks. Maybe the 6.2 will get you 2 chicks, maybe?

  • Haha 1
Posted
7 hours ago, Jonofmac said:

If you're knocking on 91 octane, you've got other issues going on. Bring it in. I experience 0 knock with 87

 
 

Nope, nothing else going on. Your not gm. There's a reason they highly recommend 93 octane. I'm happy that your think your a know it all, but you can't account for all variables, regions, and climates. It even states in the manual if you have audible knocking below 93 octane, fill up with 93 as soon as possible. If you have audible knocking on 93, then you have a problem. People can decide for themselves but I will trust gm over a random forum user. 

Posted
10 hours ago, Grumpy Bear said:

Your really have not idea what that word means, do you?

 

BETTER  

 

This isn't philosophy; this is English.  Better: Etymology Old English bettra, earlier betera "of superior quality or excellence," from Proto-Germanic *batizo

 

It has nothing to do with POWER. It has to do with excellence and quality. Does that need to be defined as well? 

 

I didn't ask the question, the OP did. His word, not mine. Difference in and of itself does not make a thing better.

 

How does the 6.2 EXCEL in QUALITY compared to the 5.3?

 

It doesn't

 

 

 

You've jumped the rails ages ago. "better" when used in the original question, just refers to "better choice".

 

https://www.thesaurus.com/browse/better

 

Either you're just bored and having fun trolling everyone, or you simply are incapable of admitting you messed up and just want to save face by banging out one useless post after another.

 

It's exhausting reading your posts.

  • Like 2
Posted

Your really have not idea what that word means, do you?

 

BETTER  

 

This isn't philosophy; this is English.  Better: Etymology Old English bettra, earlier betera "of superior quality or excellence," from Proto-Germanic *batizo
 
It has nothing to do with POWER. It has to do with excellence and quality. Does that need to be defined as well? 
 
I didn't ask the question, the OP did. His word, not mine. Difference in and of itself does not make a thing better.
 

How does the 6.2 EXCEL in QUALITY compared to the 5.3?

 

It doesn't

 

 

You are really grasping at straws. If you want me to go by your definition I would say the 6.2 is "of superior excellence" for all the reasons listed previously.

You know what people mean when they say "better". You know what the OP meant. If you want me to start using synonyms here so you can feel like you're right, fine. The 6.2 is superior; of superior excellence.

I'm honestly not sure if you are really this dense or just being difficult or maybe you're just trolling and I'm taking the bait.

Sent from my SM-N960U using Tapatalk

  • Like 3
Posted

been using a mix of 87 and 91 in every other tank when i fill up 

 

I used it on my 2014 Sierra 6.2 and then my 2016 6.2 and now my 2019 6.2 

 

Zero knock , zero issues . Everyone has their own experience but mine has been 87 works just fine. 

 

Now if i was hot lapping my truck going WOT back to back to back , then maybe 91 would be proffered ( 91 is highest here) 

 

But this is after all a truck . I get on it from time to time and hear zero knock .  What i do hear is a beast of an engine 

Posted
10 hours ago, Grumpy Bear said:

Your really have not idea what that word means, do you?

 

BETTER  

 

This isn't philosophy; this is English.  Better: Etymology Old English bettra, earlier betera "of superior quality or excellence," from Proto-Germanic *batizo

 

It has nothing to do with POWER. It has to do with excellence and quality. Does that need to be defined as well? 

 

I didn't ask the question, the OP did. His word, not mine. Difference in and of itself does not make a thing better.

 

How does the 6.2 EXCEL in QUALITY compared to the 5.3?

 

It doesn't

 

 

Might be time to get more sleep :)  

  • Like 1
Posted
11 hours ago, Grumpy Bear said:

Your really have not idea what that word means, do you?

 

BETTER  

 

This isn't philosophy; this is English.  Better: Etymology Old English bettra, earlier betera "of superior quality or excellence," from Proto-Germanic *batizo

 

It has nothing to do with POWER. It has to do with excellence and quality. Does that need to be defined as well? 

 

I didn't ask the question, the OP did. His word, not mine. Difference in and of itself does not make a thing better.

 

How does the 6.2 EXCEL in QUALITY compared to the 5.3?

 

It doesn't

 

 

You've said the same thing with different fonts at least 5 times now. Please give it a rest.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • There would be one way of determining the quality of the factory oil although probably more than a typical oil lab test, and that would be to draw out some oil from a new truck and send a sample to a lab that could do a more elaborate test of the oil. The issue with too little oil in the diff may not be the lack of lubrication of the diff bearings and gears themselves ( although a lack of oil volume for cooling ) but the wheel bearings because at some point the oil would be too low to properly get onto the spinning axle or fed along the axle tube. That was the claim by the local dealer from a couple of trucks in recent years that had the wheel bearings fail and they figured from lack of sufficient oil due to a severe underfilled diff and some of the bearing material made its way to the diff and it got damaged as well so the axle housings were just replaced on warranty. But your right that if the diff is over filled by whatever margin that it causes more churning of the oil than is desirable and that is no good either and can cause a pinion seal to leak. Also old oil I believe can tend to loose some of its properties like antifoaming and another good reason to change the diff oil every so often. 
    • I would be surprised if the diff's were not filled (with the cheapest gear lube) at the axle factory before being shipped to GM.  If you ever watched them building trucks they install the axles and all suspension parts with the frame upside down and then turn it over before its time to install the engine.     Too much gear lube in a axle can be worse than not enough especially with a lower quality GL where is get whipped up with entrained air (foam)  weakening its ability to lubricate.        
    • This is the 6.6 gasser section of the forum, you should either delete or modify your previous post as it is misleading for anyone looking for factual information on their 6.6 gas engine.
    • Well....I've done my first intake gasket. Probably wrong, but...we'll see?   Ultra black on the china walls and 1/4" up onto the sides of the intake gaskets. Permatex High Tack (couldn't find Gaskachinch) on the head side of the intake gasket. I read wrong and it says you're supposed to put it on the mating surface of the head, not the gasket. Hoping it's like a PB&J sandwich where it doesn't matter what side the PB goes on so long as there's jelly. That crap is messy/sticky and I got a dab or two on the intake port openings, tried to wipe it off. Hopefully it won't be a big deal and will only aid in sealing.   Per instructions I left the intake (top side) of the gasket dry except for a light smear of RTV around the coolant ports. Wiggling the intake in there was a bear but I had help to free me of surrounding wiring/stuff but I was basically able to set it straight down lined up with the bolt holes.   I did not think to wait until the RTV skinned over but there probably was 5-10 minutes while it sat before installing the intake.   Bolts finger tight first. Then, followed the Chilton's manual pattern to snug them to 15 lb-ft.   Waited a little over an hour, and then did the final torque in sequence again to 35 lb-ft.   Yesterday I replaced the fuel pressure regulator and got my new "nut and bolt kit" (fuel lines) installed. Damn GM used security torx on the spider, which I don't have, so I got scammed at the local HW store for an off-brand security Torx bit set.   The new driver's door mirror arrived yesterday, so, there's a chance this thing could be running and road legal tomorrow? I don't want to get my hopes up.   This will be my first time stabbing a distributor, too. Although, lucky me, someone else marked the old distributor for removal previously, I did see that. (Someone's been here before!!). Engine is still at TDC so it *should* be just a matter of transferring the mark to the new dizzy and rotating it into place.
    • He has his dad’s newer truck he’s put away. He has several old cars he rotates between him and his family. I’ve seen a restored square body and a SS Chevy truck he’s sometimes drives. He did raffle off a new suburban recently. As much as he is watched if he drove new stuff as a rule we’d know it. It would be fine by me. I don’t care what people prefer. I got one more new one in me. I’d rather my wife get one. I can’t get her out of the Genesis. Don’t tell anyone. I want her to get an electric truck. I want to put a generator in the back. Just because. She hasn’t bit yet.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...