Jump to content

2019 Silverado Custom - Adding USB-C

Semedar

By Semedar
in Modifications, Wheels & Tires

 Share

Recommended Posts

Semedar Enthusiast

Semedar

Posted
Posted (edited)

Part: GM 13525431, Receptacle Assembly, Multi Media *Jet Black

 

Just posting a thread on here if someone who has a 2019 Silverado with the one USB type B port, you can easily upgrade to a module that has a USB-C, USB-B, and an SD card port very quickly and easily in under 5 minutes.

 

I bought mine from eBay and it ran me $27.19 plus shipping.

 

I bought a trim removal kit on Amazon and used the one circled to pry it from the bottom and when the bottom popped out a bit, I pried it from the left side and it just popped out very quickly. After that, just unplug the old one and plug in the new one.

 

FYI, I also bought the module that just has just the USB-C and USB-B ports (without the SD card port) and I don't believe that one would work since it needs an extra cable to be plugged into and I was searching around and didn't find one -- you probably need a different harness for that one.

 

What I've noticed so far is that Apple CarPlay will pickup my iPhone a bit faster, skip through the songs a bit faster, and it charges my phone a bit faster, as well.

 

I haven't tried the SD card functionality yet but I can hope that it may be a necessary requirement for people that have IOR radios to upgrade to the IOS ones with navigation.

photo_2021-11-01_18-50-04.jpg

photo_2021-11-01_18-50-06.jpg

photo_2021-11-01_18-50-09.jpg

photo_2021-11-01_18-50-13.jpg

photo_2021-11-01_18-50-14 (2).jpg

71nGh8RKlVL._AC_SL1500_.jpg

Edited by Semedar
  • Like 4
GreatWhiteMexican Enthusiast

GreatWhiteMexican

Posted
Posted

I had just recently replaced the single usb to the dual usb without the sd card slot in my 20 custom tb. It works just fine without the other cable plugged into it. Both USB ports work and they light up white as well. I had plug my phone and my wife’s phone in at the same time and the radio recognized both phones. The only thing that I don’t know is if the usb-c does the fast charging or not. That’s a mute point for me since I drive nearly 40 minutes to work. 

  • Like 2
  • Thanks 1
huy8000 Enthusiast

huy8000

Posted
Posted

I want to run one in my center console. But I dont want to do any splicing. Do you know the harness number or the connect? I know how to build harnesses so if i knew the connector numbers I could easily build the harness.

Semedar Enthusiast

Semedar

Posted
  • Author
Posted
On 11/2/2021 at 10:19 PM, Todd92z said:

Does it light up and if so is it the same white color? 

 

Yes it does and yes it is!

 

On 11/7/2021 at 10:56 AM, GreatWhiteMexican said:

I had just recently replaced the single usb to the dual usb without the sd card slot in my 20 custom tb. It works just fine without the other cable plugged into it. Both USB ports work and they light up white as well. I had plug my phone and my wife’s phone in at the same time and the radio recognized both phones. The only thing that I don’t know is if the usb-c does the fast charging or not. That’s a mute point for me since I drive nearly 40 minutes to work. 

 

Good to know! I'll keep the one you installed in storage to see if someone comes out with some sort of harness to plug it in. Something tells me the extra cable is probably for higher data speeds?

 

On 11/12/2021 at 10:21 PM, huy8000 said:

I want to run one in my center console. But I dont want to do any splicing. Do you know the harness number or the connect? I know how to build harnesses so if i knew the connector numbers I could easily build the harness.

 

It was just plug and play for me and I didn't have to do any splicing. If your truck has the port with just the one USB, you can plug in the existing plugs/cables into the one that has the USB type C, USB type B, and the SD card -- it's a direct replacement and you get the entire functionality of it.

 

But if you want to plug the one in there with just the USB type C and USB type B ports without the SD card reader, you're going to have to do some digging and maybe contact someone that has that already in their truck and see where it leads to.

  • Like 1
  • 3 months later...
oorlando Enthusiast

oorlando

Posted
Posted

My truck came with usb c and usb b from factory and trying to find this harness that goes up to the console so I can add wireless CarPlay and hide the dongle in the center console. Has anyone found Y harness part #

  • 2 weeks later...
ls5454ss Enthusiast

ls5454ss

Posted
Posted

Just a note.  I did this in my truck, with the SD card, and neither plug can "charge" my Android phones while using Android Auto.  They just "maintain" charge.  I haven't tried the one without the SD yet... 

oorlando Enthusiast

oorlando

Posted
Posted
3 hours ago, ls5454ss said:

Just a note.  I did this in my truck, with the SD card, and neither plug can "charge" my Android phones while using Android Auto.  They just "maintain" charge.  I haven't tried the one without the SD yet... 

what harness did you use to get power to the middle? 

  • 1 month later...
ls5454ss Enthusiast

ls5454ss

Posted
Posted
On 3/8/2022 at 12:03 AM, oorlando said:

what harness did you use to get power to the middle? 

What do you mean power to the middle? 

oorlando Enthusiast

oorlando

Posted
Posted
37 minutes ago, ls5454ss said:

What do you mean power to the middle? 

My center console doesn’t have power. Didn’t come equipped with anything no rear outlets and nothing inside the armrest 

Railroad_Jim Enthusiast

Railroad_Jim

Posted
Posted
On 11/15/2021 at 4:13 PM, Semedar said:

It was just plug and play for me and I didn't have to do any splicing. If your truck has the port with just the one USB, you can plug in the existing plugs/cables into the one that has the USB type C, USB type B, and the SD card -- it's a direct replacement and you get the entire functionality of it.

 

I finally went ahead and ordered one of these from eBay for myself.  It'll be nice to have the USB-C port and the SD card slot.  I'll try to update after I get it and install it.

customdriver Enthusiast

customdriver

Posted
Posted

I installed this today. The usb works normally, I haven't tried the usb-c port yet. The sdcard slot seems to detect that I have inserted an sdcard, but it can't read the mp3s I have on it. I get a "No supported media found" message. Has anyone see this error before?

customdriver Enthusiast

customdriver

Posted
Posted

I figured it out. Windows would only let me format the card as exfat. I downloaded a program that allowed me to format the card as Fat32 and now the radio can read the mp3 files on the card.

  • Like 2
Railroad_Jim Enthusiast

Railroad_Jim

Posted
Posted

Big thanks to @Semedar for posting this.  My part came in and I successfully swapped it in.

Here is the thread that I created to document my installation:  

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • BDS my HD
      Brand new to this forum. Questions about re-gearing my 26’ HD

      By BDS my HD · Posted

      Hello hello looking forward to expanding my knowledge of the 2026 2500 HD that I just bought.   Truck has 3500 miles on it four-wheel-drive crew cab and I’m about to put a 6 1/2 inch BDS lift on it 18 x 10 -25 offset with 37’s   Already have the wheels and tires just waiting on the lift install in about three weeks   Question what surprises am I not gonna be happy with?  I’m not new to lifted trucks so I know that acceleration towing gas mileage all that is affected..   Question is those of you that have this truck this powertrain with a 10 speed Allison and have done the mods that I’m doing,,, how bad is it? Is that Allison constantly gonna be hunting for the right gear to go into? And what about towing, acceleration, fuel consumption as mentioned?    Lastly how come I can’t find any ring pinion gear set up for these axles and when could I expect to see them?   I apologize if there’s any typos I’m doing speech to text on my iPhone.    
    • linc45bn
      2013 2500HD 6.0L intermittent no crank no start

      By linc45bn · Posted

      I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • Grumpy Bear
      first oil change - 2026 2500HD gas

      By Grumpy Bear · Posted

      No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • Grumpy Bear
      Oil Consumption

      By Grumpy Bear · Posted

      How about them NICKS!!! 
    • Peoplemvr
      GMC 1500 Illuminated Front Grill Emblem REPLACEMENT.

      By Peoplemvr · Posted

      Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...