Jump to content

First time changing oil on this truck

TwentyEighthNight
 Share

Recommended Posts

TwentyEighthNight Enthusiast

TwentyEighthNight

Posted
Posted

Just changed the oil on my 2014 gmc sierra 4.3l. It required six quarts of oil which is what i used but now i am afraid if its overfilled or not. Its a completely different reading than what it was before the oil change. Althought its not above the hashmarks there are 2 dots on there which I’m not sure if those are the oil level indicators or the hashmarks are the oil level indicators. The dots are kinda hidden which is why I’m not sure if those even are oil indicators dots. Im really hoping i filled it up correctly and wont ruin the engine by overfilling the oil. I installed a fumoto valve so it could be easier to drain excess oil. I do note there was a metallic ticking noise that was present before the oil change but disappeared afterwards.

following picture (2) is before the oil change one of each side of the dipstick56E61FB4-2BBA-4F84-A7CC-EE86045CBF53.thumb.jpeg.f7d35d806fe6e92c13a48d448cc5bbbb.jpeg8A47DA80-9759-4703-B6A6-644903920943.thumb.jpeg.375c86f21fa05a473a360d4087ac8a85.jpeg

 

The next two fuller looking ones are after the oil change one for each side of the dipstick

E1E6C592-4D5D-47B8-959E-5C559FCE9513.thumb.jpeg.de2c8293d592f5924f53d94b9184817b.jpegFABC7973-C973-4CC6-B931-D7437B560C1B.thumb.jpeg.23de88d766ca884f1cef927cc91dcf4d.jpeg

TwentyEighthNight Enthusiast

TwentyEighthNight

Posted
  • Author
Posted
12 minutes ago, steelerdude15 said:

It looks fine to me. You can also check the owners manual and it will show you how to read that particular dipstick.

Thanks for your comment! I did check the owners manual but it had a different type of dipstick with 4 dot indicators and no hashmarks so it just made it more confusing.

Z45 Senior Enthusiast

Z45

Posted
Posted

The cross hatched area is approx. 1 qt range. 

  • Like 1
diyer2 Senior Enthusiast

diyer2

Posted
Posted

I believe the 1 quart markings on the dip stick have been a standard for years. Dots, hash marks etc. equals 1 quart.

KARNUT Senior Enthusiast

KARNUT

Posted
Posted

I always believe the marks are there to make it easier to read fresh oil. The top is full the bottom is a qt low. Whenever I changed my oil I put what’s called for and move on. When changing other fluids like transmission I measure the old coming out and put that amount in. Anywhere in the hash marks your fine. Even a qt low your fine. When I first got the CRV I check the oil at every fill up it was always different. 3000 miles later at home it was full exactly like when I left. 

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • KARNUT
      Wow I'm in a pickle. (Broke down truck) and a story.

      By KARNUT · Posted

      Google converting 98 4.3 spider injection to carburetor if all else fails. 
    • Hoginedgewood
      MPG Surprise

      By Hoginedgewood · Posted

      That computer lies!
    • Tbhats2130
      2018 Silverado Console USB Port Not Working

      By Tbhats2130 · Posted

      My centre console USB ports haven’t been working and the one in the glovebox is starting to act up. When I plug my phone into the cord the radio will go black and stop playing, and the CarPlay is inconsistent.   I checked the fuses and they were fine. I changed the USB port out and still nothing. Hoping for some advice on what I should be looking at.  
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      The truck is a 1995 Chevrolet S10 Blazer, 4.3 VIN "W" engine. :cracks knuckles:   On a whim - because I needed a headache - this truck was for sale so I stopped to take a look. Doesn't run. Well, it does, but barely. Long crank, choppy idle, bad misfire(s), it REEKS of fuel. I can DO this..I'm thinking. Diamond in the rough. One owner until last year. A young guy is selling it, he bought it 6 months ago. It stranded him more than once, he's got a newborn. It was in the shop 10 days ago and he "thinks" they said it needs a new fuel injection system. He can't put any more money into it, needs it gone. I was thinking of upgrading my Macbook, which is a total want, not a need. For less than the price of a new laptop I can have fun for months tinkering on this truck and enjoying it. I'm taking this truck home. The guy was beyond thrilled, his wife was there, she thanked me profusely, I could tell they were hurting. They seemed like good people in a bind.   Some parts, a wash, maybe a set of tires, and I can have a few months of fun and then turn it for beer money (or the next project).   Sure enough, there's a work order from a shop last week in the INCHES of paperwork on this truck dating back to when the first owner bought it. They put a new distributor in it, fuel injection work describes basically opening the plenum and putting it back together. He said he couldn't afford any more work so he had them button it up and that's when he put it up for sale.   I'm not well versed in 4.3. I did discover 1995 uses the 1992-1995 SCPI "Spider" injector which is riddled with issues from splitting lines, clogged or cracked poppet valves and plastic spider legs that crumble over time. Cool. I'll just order me a ne---. Oh, the auto parts store doesn't have it? Rock Auto doesn't have it. eBay? $$$$$$ for used. These are UNAVAILABLE period end of story unless you know "a guy" who's still got one in a box somewhere.   Can't upgrade to the '96-'04 injector, it's a different plenum, wiring/pinout and sensor config.   There are a few kinda "know a guy" -guy rebuild services for these injectors out there for about $350. Okay, Okay... I'd like to know if anyone has used them? Anyone got a lead on these crappy 92-95 spiders?   I also don't want to send MY spider to Narnia and back without knowing if that's truly the problem. I guess I'll need to pull apart the plenum and do some digging.   I was also thrown for a loop. This 1995 model year truck has an OBD-II connector. The interface is decidedly not OBD-II. I can read and reset trouble codes and view live data, but there's not a lot of data. Like misfire count and on what cylinder, that's not there. It's OBD-1.5.   Nothing is ever easy. Now it makes sense why this guy wanted to disappear this thing for cheap. I'm guessing the shop told him the injector is toast, the part is unobtainable and they're not going to sort sending the thing to a rando offering rebuild service on craigslist, and the kid likely can't be without a working car for 3 weeks even if they'd facilitate that.   Experience with these early SCPI's? Stories? Things to check? Sympathy? (..Nah...)   This can sit until I sort it. But I haven't had a problem with a vehicle I couldn't easily solve in a long time.    
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      I have four that read by the dash 8 to 10% better than miles/pump calculations and I have one that is spot on. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...