Jump to content

Recommended Posts

Posted

Just take it to a good tire shop and have them jack up the rear and run the tires at 30 or so and they can tell if tires have straight tread and if far out of round. Hopefully you can find a shop that can then high speed balance on the truck. Trueing would help more too but hard to find.

 

If you cannot find such go to discount tire or other good shop that does road force balance and have them check the balance. If out pay for a balance. tell them to rotate the tires on the wheel 180 if too much weight required.

 

Trust me, most dealers have little experience properly balancing a tire. If you get a good balance and the tires are not way out of round and still have problems, THEN go back to dealer.

Really? This is why I buy a new vehicle. So I DONT have to take it to the shop. At the tune of 40+ grand, the fix for a brand new vehicle should be on the seller/manufacturer, don't you think?

Posted

Update: well I picked up my truck on Thursday they changed the Diferencial on it. I don't know what gears it has but anyways I took it for a test drive and I no longer fell the vibration on the steering wheel. Now it's different it hard to explain but it it's feels the rear tires are unbalanced it has like a bounce to the rear end that I can feel in the driver seat and I can see it on the passenger seat. It almost feels like the road is rough and it starts doing it around 67mph I told the service guy and said I could be the frame flexing or road conditions and stated that they really don't know what else to do to it but that if I was still uncomfortable with it to take it back and they would see what else they can do to it. Well I took the truck anyways and yea it even dose that bounce thing on new roads I don't know wtf anymore or how to prove its the truck because they are saying it's road conditions.

 

The service tech at my dealer told me the same thing. He said that it felt like road vibrations and that I shouldn't put too much more effort into chasing this down in fear of driving myself crazy with it. I would have taken it back in last week but last week was completely terrible for me. Hopefully in the next couple of days I will get some time to take it in and discuss with them options. Reading all of these posts since my last has given me much more ammo to go to them with. I have also made two 10hr round trips since getting my truck back and I can tell you that it is not road vibrations. I will keep y'all updated on what I find.

Posted

Really? This is why I buy a new vehicle. So I DONT have to take it to the shop. At the tune of 40+ grand, the fix for a brand new vehicle should be on the seller/manufacturer, don't you think?

 

Yes Really, have they can they fix it? Just trying to help you get the truck fixed. Good luck with your dealer. Outside help for checking the tires etc is cheap compared to the price you paid for the truck.

  • Like 1
Posted

Bought mine in late June and for a brief second I thought I should wait and see if there are any problems, but the looks of this truck won me over.. I'm kicking myself now . Its had the tires road force balanced and no they are replacing the tires. I bought a new truck expecting it to have less problems than the 8yr old 140xxx mile truck I had. This is my second GMC truck and my first brand new one . I'm very disappointed. 2014 GMC Sierra Crew Z71 4x4

  • Like 1
Posted

Bought mine in late June and for a brief second I thought I should wait and see if there are any problems, but the looks of this truck won me over.. I'm kicking myself now . Its had the tires road force balanced and no they are replacing the tires. I bought a new truck expecting it to have less problems than the 8yr old 140xxx mile truck I had. This is my second GMC truck and my first brand new one . I'm very disappointed. 2014 GMC Sierra Crew Z71 4x4

 

Sorry for the bad luck. On my 09, I replaced the OEM tires the day I bought it. Drove straight to discount and put on Michelins LTX M/S one size up. They gave me a fair price for my trade in new tires. Their balance was fair. Had them trued and balanced on the truck the next week. Smooth as glass.

 

If one would do such you would know for sure it is or is not the tires AND you will have much better tires even if not the fix.

Posted

I have a set of 285/70/17 nittos on v-tec rims with about 2000 miles on them off my 05 that I got from discount tire that I'm going to try after I get the truck back from the dealer..

Posted

2014 Silverado. On my way home from the dealership I was having a smooth ride for the first 15 miles. Like switching a switch my truck started shaking real bad, so bad I pulled over and checked to make sure I wasn't about to loose a tire. They were fine. Took it to the dealership where it has been for 2 weeks now. They have replaced the drive shaft, didn't fix the shaking. They are in the process of replacing the rear axel, hopefully will know by Friday if it is fixed.

Posted

sbamburg,

 

Hello! I am sorry to learn that you continue to experience an issue after going to the dealership. I would be happy to look into this concern for you. Could you private message me referencing this thread including your full name, address, phone number, VIN, current mileage, and preferred dealership?

 

Jennifer T.

GM Customer Care



  • Like 1
Posted

Heard back from the dealer on Friday. They and the regional engineer both agree that there might be something wrong with the axle. So the engineer is having them check everything from alignment of parts to part thicknesses/balance to see if there is something out of spec. Hopefully I will know early next week on what they find.

  • Like 1
Posted

So today I just pulled my 600# snowmobile on a 2 place aluminum snowmobile trailer and had the worst vibrations I've experience so far. This has me more convinced my vibration issue is related to drive shaft angle. The weight on the back of the truck is slightly lifting the front and in any other truck this isn't an issue but since my truck has a vibration unloaded the extra drive shaft angle makes it worse. How does a guy get a proper drive shaft angle?

Posted

Heard back from the dealer on Friday. They and the regional engineer both agree that there might be something wrong with the axle. So the engineer is having them check everything from alignment of parts to part thicknesses/balance to see if there is something out of spec. Hopefully I will know early next week on what they find.

Please let us hear back. Dang, this thread has me concerned and I do not even have a '14 and this is slowing my decision on a possible new truck. May just cool my jets tell the Yukon XLs hit to see price etc...dang

Posted

I joined this because I was searching for information on this topic. I bought a 2014 Silverado Double Cab Z71 All Star Edition about two weeks ago. I have noticed a slight vibration or shimmy at highway speeds above 65. At 55-60 mph, it's smooth. It's most noticeable at 70-75. When I have a bottle of water in the cup holder, you can see the vibration in the water. Also, it doesn't do it all the time. It seems like when the truck accelerates (in cruise control) it does it. When on flat level or slightly down hill, it doesn't. I'm trying to decide whether to take it in or not. Since it doesn't do it all the time, I'm thinking this has nothing to do with wheel balance. Maybe driveshaft balance? Any thoughts?

Posted

I joined this because I was searching for information on this topic. I bought a 2014 Silverado Double Cab Z71 All Star Edition about two weeks ago. I have noticed a slight vibration or shimmy at highway speeds above 65. At 55-60 mph, it's smooth. It's most noticeable at 70-75. When I have a bottle of water in the cup holder, you can see the vibration in the water. Also, it doesn't do it all the time. It seems like when the truck accelerates (in cruise control) it does it. When on flat level or slightly down hill, it doesn't. I'm trying to decide whether to take it in or not. Since it doesn't do it all the time, I'm thinking this has nothing to do with wheel balance. Maybe driveshaft balance? Any thoughts?

I have a 2014 crew cab 5.3 and I too have a vibration problem. It seems to come and go. I hear a wobble sound between 35 and 40 mph and I feel vibration in the wheel at 50 and it makes my hand numb.

Posted

I joined this because I was searching for information on this topic. I bought a 2014 Silverado Double Cab Z71 All Star Edition about two weeks ago. I have noticed a slight vibration or shimmy at highway speeds above 65. At 55-60 mph, it's smooth. It's most noticeable at 70-75. When I have a bottle of water in the cup holder, you can see the vibration in the water. Also, it doesn't do it all the time. It seems like when the truck accelerates (in cruise control) it does it. When on flat level or slightly down hill, it doesn't. I'm trying to decide whether to take it in or not. Since it doesn't do it all the time, I'm thinking this has nothing to do with wheel balance. Maybe driveshaft balance? Any thoughts?

 

As it is so mild, It may well be wheel balance or more possible the out of round tires. I was having my subs tires high speed balanced on the truck. Would be smooth but start to fall apart (vibrate) at 70-75 etc. The shop finally talked me into trueing my fairly new Michelin tires; then high speed balance on the truck. Results, Smooth as glass at all speeds. All tires are some what out of round. that is one of the reasons a shop doing a road force balance may rotate a tire on the wheel 180 degs if it is requiring too much weight.

 

Also some road surfaces can cause an out of balance/not round tire to show a greater vibration. If it bothers you, I would find a good tire shop that can do a good balance on the truck. If a shop has that ability they probably can tell you if they need trueing . If not that find a place that knows how to use a road force machine. Warning, most dealerships are not in the tire balance business and cannot do a good balance. I find the oem Goodyear wranglers on the trucks to be a very poor tire and deserves replacement as soon a pocket book allows.

Posted

 

As it is so mild, It may well be wheel balance or more possible the out of round tires. I was having my subs tires high speed balanced on the truck. Would be smooth but start to fall apart (vibrate) at 70-75 etc. The shop finally talked me into trueing my fairly new Michelin tires; then high speed balance on the truck. Results, Smooth as glass at all speeds. All tires are some what out of round. that is one of the reasons a shop doing a road force balance may rotate a tire on the wheel 180 degs if it is requiring too much weight.

 

Also some road surfaces can cause an out of balance/not round tire to show a greater vibration. If it bothers you, I would find a good tire shop that can do a good balance on the truck. If a shop has that ability they probably can tell you if they need trueing . If not that find a place that knows how to use a road force machine. Warning, most dealerships are not in the tire balance business and cannot do a good balance. I find the oem Goodyear wranglers on the trucks to be a very poor tire and deserves replacement as soon a pocket book allows.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Paid $2.72 for E85 today.
    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...