Jump to content

Recommended Posts

Posted

To quote another toyota forum I frequent about vibration issue just like the one some people are having here...

 

"I'm calling and will see what Toyota will do; however, this is starting to really irritate me since the dealership seems to want to be totally hands off on this. I'm starting to regret that I traded in my FJC for this truck. Overall, I like much about it; however, this issue is ridiculous in todays day and age.....and I'm getting more and more PO'd at the dealership for not seeming to care one bit."

 

Just letting you know, even the almighty Toyotas have a similar issue.

Im willing to bet its all just bad batch's of Rims and/or Tires.

No issue on my GMC truck, thankfully.

 

-Mike

Posted

A few observations about my truck's vibrations:

  • They seem to be worse with higher psi in my 10 ply tires. Same on mine, vibes almost go away around 28 psi
  • Once they get going at high speeds, it is hard to get them to stop and it feels like it is going to vibrate me off the highway. Same problem
  • I've tried with the rear leaf spring clamps, can't say definitively whether it has helped. Helped with the spring wrap during hard acceleration, unsure if it helped the vibes maybe a little.
  • Anything messing with the suspension in the rear temporarily helps it. For exam, I have the Firestone Ride Rite air bags in the back. If I inflate them and raise the back of the truck, it rides without vibrations for several miles, but then they come back. If I let the air out and lower it back down, I have the same thing - no vibrations for a while and they they come back. I've noticed the exact same phenomena when I put the body lift on they were gone far a few days but returned. I have a set a Deaver rear springs on their way right now should fix the vibes for an hour or so.
  • They seem to be less severe in turns. I have noticed this as well.
  • Most of the time they are better if I keep it in M5 and tow mode, although they are still there. I can't figure out if the engine is unbalanced at low RPM's, or if the higher RPM's at a given speed are helping to counteract or balance out the harmonic vibrations. They feel the same to me whether in M4, M5, M6 or auto
  • I've owned several GM trucks before. My last one had 200k+ miles and drove much better than this one drives now. I was aware of the vibrations in 2014's before buying my 2015, and test drove it extensively on the highway. It was smooth as glass for the first 1500 miles. Same here one of every body style from 1977 on up they all rode better than this truck. Although I got you beat my 2015 didn't vibrate until 2000 miles.

The dealers have been pretty much worthless. I can't get them to return my calls, and when I drop it off they do almost nothing except drive it and say it is operating as normal. The last dealer said it definitely had the vibrations, but that they aren't getting enough money from GM to make it worth their while to work on these trucks. They have had several of them with no resolution. On the service write up, he blamed it on my aftermarket tires and leveling kit, even though I clearly brought it in with the same problems prior to new tires and leveling kit. It's almost like I wrote this post myself lol.

 

This problem, and GM's lack of acknowledging it, are causing me to consider other brands for the first time. I have been very GM-loyal customer but this is all changing. My wife was in the market for a Yukon Denali but is now looking at Infiniti's, Toyota's, etc. I'm now looking at F-150's if I can't get the ride problem resolved.

I redlined your post, it's almost like I wrote it myself, I'm sure others on here feel the same way. The worst part of it all is I like everything about this truck more than any of the others on the market but the vibes are killing it.

  • Like 1
Posted

I know I had energy suspension polyurethane body mounts on my 02 and it made the ride so much worse I can't imagine what it would feel like on these fully boxed stiff frames

Polyurethane is a much harder material then natural rubber which is why your ride got worse instead of better. Although you can get softer shore hardness in poly to behave more likes its rubber counterpart. The problem with the mounts on these trucks is that they're a shear style mount that gm used to give the truck better handling which worked, this trucks handles better than any others on the road, I believe motor trend or car and driver made the same comment in their tests. The problem is the mount is very rigid laterally. I gave them a close look while I was installing my body lift and I'm not quite sure how you change them out. Although I didn't try to remove one either, one thing for sure it's definitely more than just a rubber puck sandwiched between the body and frame.

Posted

Polyurethane is a much harder material then natural rubber which is why your ride got worse instead of better. Although you can get softer shore hardness in poly to behave more likes its rubber counterpart. The problem with the mounts on these trucks is that they're a shear style mount that gm used to give the truck better handling which worked, this trucks handles better than any others on the road, I believe motor trend or car and driver made the same comment in their tests. The problem is the mount is very rigid laterally. I gave them a close look while I was installing my body lift and I'm not quite sure how you change them out. Although I didn't try to remove one either, one thing for sure it's definitely more than just a rubber puck sandwiched between the body and frame.

At the time I didn't know that and my body mounts were bad so I got those and returned them to get factory rubber ones. They were also too short and threw all my body lines off on that truck. I've never looked at these body mounts, but I know on my other truck you had the body mount sandwiched between body and frame and then a large metal washer with a rubber boot on it to absorb more vibration on the underside
Posted (edited)

After reading all this i am still confused about the following: If there is indeed a design issue, why is it that only a small percentage of these trucks have vibration problems? Maybe the body mounts are stiff and transmit a lot of vibration into the cab, but it seems that it takes a combination of several factors, such as the worst case stack up of sloppy tolerance parts and shoddy workmanship to get a true vibrator. Maybe this is why GM does not want to address the issue - they would have to redesign some critical parts to tighter tolerances and replace them, and that is proving to be too expensive.

Edited by pm26
  • Like 2
Posted

After reading all this i am still confused about the following: If there is indeed a design issue, why is it that only a small percentage of these truck have vibration problems? Maybe the body mounts are stiff and transmit a lot of vibration into the cab, but it seems that it takes a combination of several factors, such as the worst case stack up of sloppy tolerance parts and shoddy workmanship to get a true vibrator. Maybe this is why GM does not want to address the issue - they would have to redesign some critical parts to tighter tolerances and replace them, and that is proving to be too expensive.

 

It's called the bottom line!
Posted (edited)

After reading all this i am still confused about the following: If there is indeed a design issue, why is it that only a small percentage of these truck have vibration problems? Maybe the body mounts are stiff and transmit a lot of vibration into the cab, but it seems that it takes a combination of several factors, such as the worst case stack up of sloppy tolerance parts and shoddy workmanship to get a true vibrator. Maybe this is why GM does not want to address the issue - they would have to redesign some critical parts to tighter tolerances and replace them, and that is proving to be too expensive.

 

It might be a small percentage in the scale of things but it is still a lot of trucks and SUV's that have the vibration problems. Even if it is a small number GM should be able to pin point the problem and get it fixed. Like I have stated before, I like my truck a lot except for this vibration issue. I am also thinking what if this vibration causes other problems after time. If things are shaking all over the place something is going to give. Cracked welds, Nuts coming loose, Supports breaking, ect...(all big safety hazards). Most of the highways are 65mph in my area and that is in the sweet spot that the vibration is happening on my truck. I will not bash GM because all manufactures have these problems it's just that they work to get it fixed. Either they still have not found out what is going on or they just wont say because it would cost too much to fix. either way I wish GM would post again in this forum and at least give us an update instead of running and hiding. Come on GM let's hear what you have????

Edited by rshad
Posted

small % my a$$, tried to trade mine for a Ford today, Ford dealer told me there was a $10,000 hit for trading in a 14-15 GM truck at their dealership, they didn't want them.

  • Like 1
Posted

Haven't seen GM chime in lately on the thread at least to try to help! Someone knows(said this before) at GM or at one of the factories where these bad parts were made. I admire the hard work by many on this thread to solve this vib issue! There will be hero's if not already for their effort to solve this problem!! Let's dry up this thread. Sorry for those with vibs in their trucks.WLC

GM Where are youuuuuu!
Posted

My truck has 36.5k miles, High Country trim, I put very good cause I'll end up getting everything fixed so it has to go to the body shop (hit two deer, crack in windshield as well, some paint chips I'll get touched up). These are current trade in estimated values and sale prices on my truck

 

61e4a223072b7ae63c59cdbbcee6bf19.jpg

 

d16d4cee1adff3c9daef1cb756bf8bc5.jpg

 

Upsetting that I got the truck for around 46k I believe. I owe more than its worth right now. And that's not to include what the trade in dealer would take off. Very depressing considering I could go out and get an 06-07 2500HD with an LBZ Dmax with 75k miles, fully equipped for the cost of my top of the line truck with less than half the miles. That truck is almost 10 years old, this one isn't even 2. Very depressing

Posted (edited)

I think it is something with the electric power steering, but it's going to take someone a lot more mechanically talented than me.

Edited by paxtonman
Posted (edited)

I think it is something with the electric power steering, but it's going to take someone a lot more mechanically talented than me.

If you suspect that the electric power steering might be contributing to the vibration problem, is there a safe way to disable the electric power steering and drive the truck to see if vibration will diminish? It is certainly possible to do this with traditional hydraulic steering, you just will not have the power assist. But even electric steering should be fail safe , i.e. the truck should be steerable with more physical effort should the electric assist fail. Is that the case here?

Edited by pm26
Posted

small % my a$$, tried to trade mine for a Ford today, Ford dealer told me there was a $10,000 hit for trading in a 14-15 GM truck at their dealership, they didn't want them.

Apparently there is enough of these trucks being traded and you can bet that they are being traded in for a good reason. People normally do not trade in trucks less than a year old, especially when they cost so much to buy. Gone are the days when you could trade in a year old truck and get almost 90% of the price you paid for it.

Posted

Someone needs to put 4 steel wheels on a vib truck. I have two spares never on the ground.

  • Like 1
Posted

small % my a$$, tried to trade mine for a Ford today, Ford dealer told me there was a $10,000 hit for trading in a 14-15 GM truck at their dealership, they didn't want them.

YUP, I found that out months ago

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Thanks for all that information, I might purchase one and see if it will work for me, if not they may let me return it! Yes for sure the tires are definitely within limit for my truck empty, and when I do tow I'll definitely make sure to raise the rear psi for the amount of weight that's going to be on it.
    • Yes exactly, more and more these days people/companies are afraid of liability issues so its easier just to say no rather than risk putting their neck on the line.    I will say with the Autel unit or when I used it last year on my truck, it wasn't like I could choose the 2025 model year or even the 2024 model year as that option was not there to manipulate the placard pressures but had to go back to 2023 or there abouts and then it showed up as an option, odd but that was how the software was then and I can't say one way or the other now as they throw out updates every so often. I still would talk to your tire dealer though to start with and they may do it for nothing but also they may have a comment on a better unit to purchase. All I know is that one of the large tire shops in my area happens to use these Autel units for their use and set them up to use the wifi and all of that jazz for constant updating because each tire tech has one handed to them by the shop but I just plugged it into my laptop to update it and yes if one is bought it has to be registered so you can get the link to do updates and then the unit has to be updated before its even used. I am not at all techy so it took me a bit but anyway just a heads up for anything you buy, most likely it will need to be connected to a computer to access the internet to have it updated to the latest software version before you can put it to use.   If your truck is near empty, those tire pressures you listed are a very safe upper range pressures to carry the weight, both the front and rear as I know they could be run lower yet with an empty truck. And if its a trailer and not some motorcycle your going to strap onto the front of your truck on a rack, you shouldn't have a need to inflate your front tires if your at 55 front already, its the rear ones that would need more air if you have much hitch weight. 
    • Thank you, I'll check that Autel scanner out and see if it will work for me! Ya I can see GM's point of view if they lower the psi set value for someone and the person sell's the truck and the new owner puts the factory tires back on then their could be liability issues cause the psi warning light wasn't coming on when the tires were under inflated for towing their load and then it might be able to be traced back to GM lowering it.
    • I had a similar but different response when I talked to the service manager where I bought my truck in that he said GM corporate won't allow them to lower the placard pressure setting as they would get their hand slapped but that of course they have the ability to make that change. His suggestion was simply go to a tire dealer or third party shop that is willing to reset the pressures lower. However I chose to buy a tpms tool and partly based off of this very forum as it had been proven to work on the 2024 model ( Global B system ) and while I could have paid lots for a full two way diag tool, I didn't want to spend that much and bought the recommended Autel TS 508 and it will reprogram the 2025 model and assume it should do the 2026 as well. However the tool is rather proprietary to reprogramming Autel tpms sensors so that is a function I will never use, where as a real two way scanner would have many uses but also have yearly subscriptions etc where this 508 is free updates for as long as they put updates out for the unit. In any event it worked to lower the placard pressures and I often use it to adjust my actual tire pressures although will check with a mechanical gauge as well sometimes just to make sure that tires tpms sensor isn't lying to me.    My suggestion is either buy a tool that you know will work to adjust the system or start out by getting the tire shop you bought your tires from to reset your truck and if after that you still want a unit to do it yourself, get one at that point. 
    • Here is an image of a quick Google search about these tires on my truck and it's exactly same psi recommendation the Toyo tires company gave me!    I'm not looking for anyone else recommended psi or anything, I'm just looking to see if anyone knew a way to get rid of the factory low psi warning light, because I'm not running high psi and ruining my tires when I'm not towing! 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...