Jump to content

Recommended Posts

Posted

WOW,

 

So sad to see so many new people and worse seeing some with unresolved issues STILL !

 

I was jaw jacking with a guy last week at the car wash and commented on how nice his Silverado

looked and then he unloaded for the next 20min about the vibration issue he's having on his

50k + truck with 2,200 miles. Wished him the best and gave him this link.

  • Like 1
Posted

I rode a Harley Sportster and have wrenched on dirt race cars for years. Vibrations will tear things apart over time. The mirror stems broke, tail light broke, license plate bracket broke, and an 1/8" thick steel tach bracket broke in half and all due to a 'buzz' in the bike (solid mounted unbalanced engine to frame). As noted above, rattles will become numerous with time. The seat frame is probably going to be the first part to fail as these trucks tend to centralize the vibrations to the center front seat. The buzz in my truck is very faint. Most noticeable around 60 mph and then is smooth at 70+. To me it feels harmonic. I think the frames are now rigid enough that other areas like suspension bushings, shocks, cab bushings, engine mounts, transmission and transaxle mounts, etc all are now allowing normal chassis vibrations to be felt. This is why some of the things like new shocks, changed ride heights, clamped rear springs, shimmed engine mounts, etc all have had some affect. With the frame so rigid, alignment of all parts becomes even more critical. Someone posted their vehicle alignment specs on here a while back and I noticed the whole rear end in that truck was toed to the right. A simple issue like that on a rigid frame can cause a harmonic vibration. A slightly out of round driveshaft would have been masked in a less rigid frame, but now it rears its ugly head. etc.

 

 

EDIT: I did the water bottle on the transmission tunnel test again this morning and perfectly still except for the horrible Illinois roads.

 

So your experience with a vibe Harley and dirt cars have convinced you that GM 1500s will have similar failures? Interesting.
  • Like 2
Posted

So your experience with a vibe Harley and dirt cars have convinced you that GM 1500s will have similar failures? Interesting.

 

I find it more interesting that someone would believe that vibrations are not likely to cause premature parts failures.

  • Like 2
Posted

Yes the effects of long term vibrations can fatigue metals, loosen bolts, etc. Will it happen on these trucks, heck your guess is as good as mine.

  • Like 2
Posted

Honestly i am shocked that there is a lack of support from some on here for those which are having this problem. I've seen the videos and if mine were like those I'd be at the dealership for a fix as well. Luckily mine is only a slight buzz.

Posted (edited)

Honestly i am shocked that there is a lack of support from some on here for those which are having this problem. I've seen the videos and if mine were like those I'd be at the dealership for a fix as well. Luckily mine is only a slight buzz.

Support was lost when those that unfortunately have the issue make outrages claims that EVERY truck vibrates, that owners who say theirs ride smooth don't know anything or understand how a car should drive, that every GM is a POS, etc.

Edited by blifsey
Posted

Honestly i am shocked that there is a lack of support from some on here for those which are having this problem. I've seen the videos and if mine were like those I'd be at the dealership for a fix as well. Luckily mine is only a slight buzz.

Thanks for the empathy,but, there is no fix yet. Probably why we have 585 pages on this forum thread.

Posted

 

I find it more interesting that someone would believe that vibrations are not likely to cause premature parts failures.

Every rotating piece of equipment vibrates, It's just the nature of the beast. Just because you can't feel a vibration in the cab doesn't mean the drive train is not vibrating. What I'm saying is the vibration source could be the same for every one of these trucks built. Just a small portion (mine being one of them) is allowing the vibrations to be felt in the cab. That being said, the vibration issue could be a problem of transmission due to poor isolation. Some have had their vibe fixed by tightening the body mounts or lifting the cab and retorqueing the bolts. This in no way addressed the source of the vibration it merely made it to where they could no longer feel it. Everyone of these trucks have a drive train that vibrates, the real question is do you feel it in some because the vibration source is stronger than others or do you feel it in some because the isolation is poor. Either way feeling a vibration doesn't mean there is going to be a premature premature failure, there's a factor of safety engineered into everything built.

Posted

I find it more interesting that someone would believe that vibrations are not likely to cause premature parts failures.

 

Please re-read what I said. The experiences are not equal! I've had the vibes (fixed) and feel for owners whose vibes are not fixed. What I believe is just as irrelevent as what you think is interesting - even if it's not there.

Posted

Well, if anyone should know about vibration it would be a Harley rider, lol :) But, for him to quantify what should be considered excessive? Well, thats a bit of a stretch !

Posted

Well, if anyone should know about vibration it would be a Harley rider, lol :) But, for him to quantify what should be considered excessive? Well, thats a bit of a stretch !

Snide comment aside, your comment actually proves a point I've tried to make all along. Everyone feels vibration to a different extent. One person may feel a small vibration and consider it uncomfortable while another will not feel a much larger amplitude vibration. You're Harley example is 100% proof of that....typical Harley owners obviously don't find that amount of vibration bothersome, yet many folks would find it quite objectionable. (I wonder what the Picoscope would measure on your favourite hard-tail!)

 

That said, most owners of these new generation GM brand pickups previously had GM brand pickups, and most almost immediately noticed an elevated vibration that was not present in their previous truck, and was bothersome. That's what brought them to this website. I truly believe most people on this thread did not sit down one day and go "gee, I wonder if I can go find an issue with my truck on the Internet and tie up dozens or hundreds of hours on it". Sure, there are always a few bored ramble-rousers with nothing better to do than stir things up. But I believe most folks on here simply want a vehicle that's at least as smooth as the one they traded in or sold!

  • Like 1
Posted

Let's all get along. Arguing just divides us. We don't need that.

Agreed!

Posted

Snide comment aside, your comment actually proves a point I've tried to make all along. Everyone feels vibration to a different extent. One person may feel a small vibration and consider it uncomfortable while another will not feel a much larger amplitude vibration. You're Harley example is 100% proof of that....typical Harley owners obviously don't find that amount of vibration bothersome, yet many folks would find it quite objectionable. (I wonder what the Picoscope would measure on your favourite hard-tail!)

 

That said, most owners of these new generation GM brand pickups previously had GM brand pickups, and most almost immediately noticed an elevated vibration that was not present in their previous truck, and was bothersome. That's what brought them to this website. I truly believe most people on this thread did not sit down one day and go "gee, I wonder if I can go find an issue with my truck on the Internet and tie up dozens or hundreds of hours on it". Sure, there are always a few bored ramble-rousers with nothing better to do than stir things up. But I believe most folks on here simply want a vehicle that's at least as smooth as the one they traded in or sold!

This is me. Id love to not have to jack with this headache. My '12 GMC i traded in had no issues. I miss that truck

 

 

Sent from my iPad using Tapatalk

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I am having similar issues.. 08, 4.8L granted I did had a fender bender and minor damage up front passenger side but I don’t think it had anything to do with it.. I had the high and low pressure checked and my fan for my radiator keeps coming on.. replaced the pressure switch and don’t want to keep throwing parts at it. I did have some minor problems here and there like on long road trips sometimes the ac would get a little warm and then on the highway as soon as I give it a little gas or get a little heavier on the petal it started running cooler. Never had an issue with the ac besides the here and there.. but I also started having issues when I fuel up now it takes a bit to start ( super embarrassing) it runs fine and once started ( only happens after fueling up) starts fine any other time. Could they be related?
    • Spent a small fortune on fuel this weekend.   $6.69 diesel, 18 gallons of that. $6.99 92-octane ethanol free, 10 gallons of that for yard machines $5.59 87-octane for one of the cars, 11 gallons.   $250+ and I didn't even get a tug.   Hormuz ain't Hormuzin again, did not see that coming...LOL
    • Appreciate the advice. I've watched multiple videos. Most showing the most complex for those that have a center console, to one that showed maybe 2 pieces of trim being removed, like 6 screws, pulling back the screen and switch assembly, and installing the inline module. And this was a new/newer Silverado. That didn't look too bad. All the others show alot of trim pieces that need to be removed. I've broken those kind of tabs/clips on my C8 Corvette trying to get to the battery, and that was a lot less clips than what I think is involved here after watching multiple videos and looking at my dash today. I have one on the way. Called a reputable stereo place about installing it and got a "minimum" price of $175. Ouch! Looking forward to seeing what the instructions have to say.
    • Hard to say what the issue might be. Anything from the ability to cool the AC condenser up front, to blend door issues in the HVAC unit, to refrigerant charge, to compressor issues or issues in the lines.   Report back what the techs find on the 29th.   GM has service publications which list acceptable vent temperatures and AC pressures at given ambient temps and humidity. They probably won't touch the system if it's operating within those ranges.   I'm also surprised to hear your 2024 with the L8T is still using R134a? I was pretty sure the HD's had switched to the new refrigerant around 2020.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...