Jump to content

Recommended Posts

Posted (edited)
On 2/18/2020 at 9:50 PM, Ravenkeeper said:

Rerouted the Illuminated Bow Tie harness on my truck this morning, before going to work.  I didn't like the way I ran it when I installed it a few weeks ago. ? When I tore it apart, I found out that I had to do some wire repair, too, both the white and the black wire had chaffed a little. ? I originally had the union between the two halves "clipped" to the truck frame, and later decided that if anyone takes off the grill and didn't realize it was done that way, they could easily damage either the light or the connector.  Found a video, this last weekend, while I was sick ?, that ran the main part of the harness along the same route with the hood release. ? Took photos of the original route and the new route, will post them when I get home from work tonight, or before I go to work tomorrow afternoon.

Originally drilled the 3/8" hole dead-center, but had to work it down/left to line it up correctly.

IMG_0800.JPG

 

Original path that I ran the harness:

IMG_0803.JPG

 

Zip tied the two wires to the "struts" just left of center:

IMG_0807.JPG

 

Rerouted the harness thru top of left headlight assembly and across the top of the grill:

IMG_0810.JPG

 

Now, I can easily disconnect the illuminated bow tie before removing the grill, next time:

IMG_0811.JPG

Edited by Ravenkeeper
  • Like 1
Posted
Those are nice pods. Where did you get them from?

Sent from my SM-N975U1 using Tapatalk




SDHQ A pillar bracket
Baja Design spot/wide cornering facing forward
Rigid flood facing side ways




Sent from my iPhone using Tapatalk
  • Like 1
Posted



SDHQ A pillar bracket
Baja Design spot/wide cornering facing forward
Rigid flood facing side ways




Sent from my iPhone using Tapatalk
Awesome thanks! I'll look into a pair of those for sure

Sent from my SM-N975U1 using Tapatalk

  • Like 1
Posted

Put in the motofab 2.5”/2” kit.  Happy with the results.  Will put some ridge grapplers on when these wear out. Just have to figure out what size when that time comes 

18250656-92F7-4778-9F59-0CE7E40BD05F.jpeg

E67B3975-7E54-45B5-9404-19F6F1CA4C38.jpeg

  • Like 1
Posted
Upgraded my brother in laws seats with Wet Okole covers!

bf892673905067ea96094680a27592ef.jpg

2ff33ff8d28086f0765b803c757e34e6.jpg


Sent from my iPhone using Tapatalk
I can't see them. Must be cammo

Sent from my SM-N976V using Tapatalk

  • Like 2
Posted

King off road 2.5” coilovers with reservoirs,

i left a 1/4” of rake but looks level to the eye. Rides amazing compared to stock!

46383EC2-445F-4422-B92B-D036D089808E.jpeg

5BE0069A-F4EE-461A-9A8C-7E1E32501F92.jpeg

651BE361-D80C-4541-AEE3-7E79C5D893EF.jpeg

  • Like 7
Posted
King off road 2.5” coilovers with reservoirs,
i left a 1/4” of rake but looks level to the eye. Rides amazing compared to stock!
46383EC2-445F-4422-B92B-D036D089808E.thumb.jpeg.eefef1bd9e18388f5fb13f3c23872f43.jpeg
5BE0069A-F4EE-461A-9A8C-7E1E32501F92.thumb.jpeg.beacff34887a55b940a92a771d973e8f.jpeg
651BE361-D80C-4541-AEE3-7E79C5D893EF.thumb.jpeg.3b28336e6e358382985cd51e19442a47.jpeg


How’s the ride in the rear compared to stock? I have the front coilovers and fox 2.0 in the back, not sure if it’s worth the upgrade to Kings in the back


Sent from my iPhone using Tapatalk
Posted (edited)

IMG_3664.thumb.jpg.476a835fdaa346fcfef5729e7ad6ccea.jpg

 

Swapped key fobs to the AJT key fob. Beyond happy with it and I really like the solid buttons rather than the frail rubber buttons thats on the original key fob.

 

 

Edited by Flexbrah
  • Like 6
Posted
2 minutes ago, Flexbrah said:

 

Swapped key fobs to the AJT key fob. Beyond happy with it and I really like the solid buttons rather than the frail rubber buttons thats on the original key fob.

 

 

Do you have any pictures?

Posted
2 minutes ago, JimCost2014 said:

Do you have any pictures?

 

Just added! Sorry trying to figure out how to add pics to the pist

Posted
25 minutes ago, Flexbrah said:

 

Just added! Sorry trying to figure out how to add pics to the pist

I see them, pretty stout looking!

Posted
5 hours ago, Flexbrah said:

IMG_3664.thumb.jpg.476a835fdaa346fcfef5729e7ad6ccea.jpg

 

Swapped key fobs to the AJT key fob. Beyond happy with it and I really like the solid buttons rather than the frail rubber buttons thats on the original key fob.

 

 

Damn dude! I didn't need to see this, as I always wondered about other type replacements for the fobs. Too bad they didn't make a CNC machined aluminum instead of the injected plastic. Hardest decision of the day, what color combinations... LOL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • It was never mandated.  Ever.    Automakers were incentivized to install it by getting CAFE credits to help with their vehicle fleet fuel economy scores.  They were being handed money/CAFE credits to install it.  Which is NOT a mandate.       The current admin removed the incentives that were behind them installing it.       
    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...