Jump to content

Recommended Posts

Posted

I just did a touch-up on mine this weekend. Resprayed the whole frame with fluid film using a cheap harbor freight spray gun. I was able to almost "fog" the inside of the frame with it. Found several sections that I had missed previously that had big chunks of wax that had pulled away from the frame. Ripped tge wax off, painted the area, and sprayed it down with fluid film.

Posted

I just did a touch-up on mine this weekend. Resprayed the whole frame with fluid film using a cheap harbor freight spray gun. I was able to almost "fog" the inside of the frame with it. Found several sections that I had missed previously that had big chunks of wax that had pulled away from the frame. Ripped tge wax off, painted the area, and sprayed it down with fluid film.

 

How long does it take for the smell to go away?

Posted (edited)

I've noticed rust around some edges in different spots on my frame, noticeably in the rear wheel wells. I've kind of ignored it, it looks like it's just surface rust. But my cousin was showing me his new '15 Ram, and it looks immaculate underneath. Mine never looked that good even when it was new. And now that this thread has popped up again I'm wondering if I should take it in and have it taken care of?

 

Edit: It was bugging me after reading this, went out to take a picture and was quite easily able to take a big flake of wax off. Here's a pic of the flake and some of the rust in the wheel well.

 

IMG_20150621_215235.jpg

 

I have to go in this week for them to repair one of my coat hook that won't stay down, maybe I'll mention it to the service guy then

My '15 Sierra looks like your cousin's 2015 Ram have to check them out I've seen them new routing and clean, iv'e got 1300

miles and it looks perfect hope it stays that way.

Edited by Raiderse
  • 2 weeks later...
Posted

My 2015 GMC Sierra Crew cab has many areas of rust on the frame....I've got 200 miles on it and it's 5 days old. Went to the Chevy dealership and found similar conditions on new trucks in the lot...predominantly crew cabs manufactured in Mexico. Have forwarded pics to my dealership and am waiting to hear. Totally stressed out as this was a huge expense for me. Would like to just give it back.

Posted (edited)

My 2015 GMC Sierra Crew cab has many areas of rust on the frame....I've got 200 miles on it and it's 5 days old. Went to the Chevy dealership and found similar conditions on new trucks in the lot...predominantly crew cabs manufactured in Mexico. Have forwarded pics to my dealership and am waiting to hear. Totally stressed out as this was a huge expense for me. Would like to just give it back.

 

This is something I noticed on the lots when I was looking . I made sure my frame looked good and at 1500 miles still rust free , it has a nice even coating and looks like new everywhere i can see. I would feel the same as you do and I passed on a couple of trucks just because of this. Mine is also a crew cab made in mexico. When is your manufacture date? Must be something different in the recess or I just got lucky I guess. or maybe the rust gremlins will get me in the future who knows but I must say it made the trucks look old to me.

Edited by Raiderse
Posted

How about these pics? Truck has 250 miles on it. Supposed to go in for tsb repair next week. Hard to believe. I don't expect much from the repair or this truck long term.

post-147894-0-40335700-1441405234.jpg

post-147894-0-82513100-1441405255.jpg

post-147894-0-18185700-1441405271.jpg

post-147894-0-40335700-1441405234.jpg

post-147894-0-82513100-1441405255.jpg

post-147894-0-18185700-1441405271.jpg

post-147894-0-40335700-1441405234.jpg

post-147894-0-82513100-1441405255.jpg

post-147894-0-18185700-1441405271.jpg

post-147894-0-40335700-1441405234.jpg

post-147894-0-82513100-1441405255.jpg

post-147894-0-18185700-1441405271.jpg

Posted

How about these pics? Truck has 250 miles on it. Supposed to go in for tsb repair next week. Hard to believe. I don't expect much from the repair or this truck long term.

 

That sucks! Good luck, hopefully they can fix it and make it right.

Posted

When I pick up my truck tomorrow from a place I got undercoat done. It's called armaguard which is identical to linex. They spray the whole underside except drive train and exhaust. Will post pics tomorrow.

Posted

So they removed all the wax and degreased it? What about the inside of the frame? Seems like it'll rot from the inside out unless they address it. Did they pull the bed off to get the top of the frame?

Posted

I am looking at coating my 2015 silverado with a rust preventer? I have looked at the flowing brands waxoyl,fluid film,sems rust preventer, seal out. I think the factory Frame wax is waxoyl products not 100% sure. What did you used and are you happy with the results.

Posted (edited)

Here's some pictures of my undercoat. It actually comes with a lifetime (originally thought it was only 1 year) warranty for the life of the truck as long as I own it. Any part that chips, peels, globs off they touch it up and blend free of charge.

 

Most parts of the frame and underbody were done all around (and inside from what i can see)that didn't require removal of something major. Under the engine bay was left alone due to dealers requiring most access for services underneath.

 

They sprayed over the factory wax which if it ends up falling off they just touch up anyways. It looks like the factory wax when it's brand new but is hard as rock to the touch.

post-79641-0-70690600-1441731057_thumb.jpg

post-79641-0-07301500-1441731069_thumb.jpg

post-79641-0-66797700-1441731084_thumb.jpg

post-79641-0-58718800-1441731095_thumb.jpg

post-79641-0-70690600-1441731057_thumb.jpg

post-79641-0-07301500-1441731069_thumb.jpg

post-79641-0-66797700-1441731084_thumb.jpg

post-79641-0-58718800-1441731095_thumb.jpg

post-79641-0-70690600-1441731057_thumb.jpg

post-79641-0-07301500-1441731069_thumb.jpg

post-79641-0-66797700-1441731084_thumb.jpg

post-79641-0-58718800-1441731095_thumb.jpg

post-79641-0-70690600-1441731057_thumb.jpg

post-79641-0-07301500-1441731069_thumb.jpg

post-79641-0-66797700-1441731084_thumb.jpg

post-79641-0-58718800-1441731095_thumb.jpg

Edited by Jordan18
Posted

Here's some pictures of my undercoat. It actually comes with a lifetime (originally thought it was only 1 year) warranty for the life of the truck as long as I own it. Any part that chips, peels, globs off they touch it up and blend free of charge.

Most parts of the frame and underbody were done all around (and inside from what i can see)that didn't require removal of something major. Under the engine bay was left alone due to dealers requiring most access for services underneath.

They sprayed over the factory wax which if it ends up falling off they just touch up anyways. It looks like the factory wax when it's brand new but is hard as rock to the touch.

That looks very good can you find out what brand the product that was used thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I know; crap pictures.   Anyway, as a finale of sorts to this thread, I had replaced both differential covers and since they had the capability of adding temperature probes, I did that. These are MaxTow analog/digital gauges with stepper motors. They'll flutter around like crazy for a moment and start at a nominal 100 degrees Fahrenheit.   I drove a 30-mile loop to the grocery store, averaging 70 MPH (as much as 80 to see if there was a quick spike in temperature. The air temperature is 102 (ambient ?). but the first pic is 7 miles into the trip. The second is getting back into the truck after leaving the store; differential temperatures dropped about three to four degrees in 15 minutes. The third pic in on the road to my house, about a mile away.   In that run, I saw a high of 150F on the rear differential, and 121F on the front. I'm sure a longer drive or towing will see higher than that, and when that happens, I can update the observations. 
    • You don't want to become predictable now, do you? 😏
    • Fully warm, coolant temp >194, closed loop.   Run time can be anywhere from just reached operating temperature to having driven 30+ miles.   The O2 chart (which is a feature I just discovered after reading) for the bad idle seems to be "most" of the time. For the little time I've been watching it (scanning and driving! watchout!) I can't seem to isolate any cause or condition yet.   It definitely idles rougher sometimes than others and so far what I've seen is the rougher idles are always rich. But not enough to set a CEL.   In other news I replaced the starter solenoid. Everything on this truck is such a PITA. Starter "snout" is mangled up with the torque converter inspection cover which is tangled up with hard cooling lines and the driveshaft. But I got 'er done without too much swearing...I just go into everything now knowing it's going to be a frustrating mess.   The starter solenoid replacement kicks off the next round of work: AC, injector rebuild, cat, exhaust. I'm just going to do it all. But first:   I don't know what my fuel pressures are. I can't definitively say the issue is the injector without first verifying fuel pressures and any leakdown. I "rented" a test kit ($199.99 at O'Really's ...intentional misspelling). They don't "rent" tools anymore, they charge you for the tool and then you return it when you're done. No joke. It is listed as a rental on the receipt but the guy told me there's no difference between renting and buying  now, you just return it when you're done and they refund the credit card. Mmmkay, whatever.   I will rule out fuel pressure issues (too much), and any leaking (that's how I'll know the problem is inside the intake). I think someone said the return line could be plugged or not flowing and that could cause high fuel pressure (and too much fuel being pushed through injectors). I'll cross that bridge if I get high readings.   As of now I'm ready to tear off the intake cover, extract the injector, and have it sent off to be rebuilt just so I can rule that out.
    • What are the conditions of this rich idle? Warm or cold engine? Run time? Does every idle look like this or only sometimes?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...