Jump to content

Recommended Posts

Posted

20x9 +27 is stock in most cases I believe.

Personally, I think 0 offset is just about perfect. But, everyone likes different looks.

Sent from Tapatalk App - Samsung S6

Thanks for this info. So, it looks like the Fuel Assault comes in a 20x9 with +1 offset if I'm reading it correctly. That's about as close to 0 as I see available in this wheel. Will this stick out a bit from the fenders? I'm hoping so because I'd like to fill the gap from the bushwackers a little bit.

 

Thanks

Josh

Posted

I went with Fuel Beast 0 offset. Puts them out about an inch wider than stock. It does limit you to how wide of a tire you can go with though, unless you do more than a level only. I rub with 275/65/20s. Not horrible but it's still there, so if you want to go with a wider than stock tire keep that in mind

Thank you for this. I have 275/60/20 BFG KO2's going on this Thursday. I'm hoping they won't rub with the 2" level through the fox coilovers. The closest to 0 I could find in the Fuel Asault is +1. That's still a 20x9 so I'm pretty sure it won't rub. I'm just hoping it will stick out a bit further than the stock wheels because I want to fill the gap created by the bushwacker fender flares.

 

Thanks

Josh

Posted

So I have a 2014 Denali 4x4, I am going to change struts/shocks to Bilstein 5100's. I have decided on Dueler AT Revo 2's for rubber, my question is regarding the size, what are your opinions between 275/60R20 vs 275/65R20 with regards to fitment? Will the added weight of the 65's make much of a difference. Changing from GY LS2's 275/55 BTW, thanks in advance.

I have a 2.5" rc level kit and run 275/60/20 on my stock rims during winter and 275/65/20 on my fuel rims the rest of the year. The 275/65/20 def fill the wheel wells better and the height shouldn't be a problem with the 5100s. I went with 10 ply on my 275/65/20 and with the added weight barely notice a difference in gas mileage or ride. You don't have to go 10 ply either. I'd go with 275/65/20

  • Like 1
Posted

After running both would you still go back to ST Maxx or stick with the toyo?

The Toyo AT2's are great tires and are quieter than the ST Maxx. The ST Maxx made more noise but the tread and sidewalls are damn tough. I'd take the Coopers.

Posted

Thank you for this. I have 275/60/20 BFG KO2's going on this Thursday. I'm hoping they won't rub with the 2" level through the fox coilovers. The closest to 0 I could find in the Fuel Asault is +1. That's still a 20x9 so I'm pretty sure it won't rub. I'm just hoping it will stick out a bit further than the stock wheels because I want to fill the gap created by the bushwacker fender flares.

 

Thanks

Josh

The wheels will stick out about an inch wider on each side so it will help a bit. My wheels are either +1 or 0 can't remember but pretty much the same, and I have KO2s as well. Tough to say if it will rub cause you have a slightly different setup than me. The rub isn't that bad though, I could probably trim the carpet a bit and it would go away I just haven't bothered.

You can kind of see in these pics they sit a little wider

62093600f6004f0676f52e29667d7eeb.jpgc6a8d7efb20d2c22b2ae2e70098f6771.jpg

  • Like 2
Posted

It seems everyone on this forum says they went with BFG KO2 but I want to look at other options in A 275/65r20. Anyone have any experience with any of the following?

 

Toyo Open Country AT2 ($1000)

Cooper Discover ST Maxx ($1150)

Cooper discover AT3 ($950)

BFG T/A KO2 ($1180)

Check out the Nitto Exo grappler. I went with KO2s and shortly after I saw the exos installed on another truck and they looked really good, kind of wish I gave the exos a shot. They looked way better on a truck than the pics of them do online or in store.

Plus like you said not everyone else has them

Posted

How about a 20x9 wheel with a +18 offset and 295\55\20 tires? RC 2.5 level. Rubbing?

No rubbing, you can run +1 offset with that tire and 2.5 level with no rubbing. I ran that exact setup for a couple months.

Posted

2015 Silverado 1500. I know this has to be on here somewhere but can't find it. I'm running 305/55/20 now where as I had the stock 275/55/20. What is going to be my mph difference? I'm very new to the lifting and putting bigger tires on thing but I know enough that it can't be right. I'm sure it threw other stuff off also such as odometer and mpg, both if which I'm not as concerned about. With all that said, is there a way to have the system re calibrated and where is that type work normally done? Any experience with that? Cost?

Posted

2015 Silverado 1500. I know this has to be on here somewhere but can't find it. I'm running 305/55/20 now where as I had the stock 275/55/20. What is going to be my mph difference? I'm very new to the lifting and putting bigger tires on thing but I know enough that it can't be right. I'm sure it threw other stuff off also such as odometer and mpg, both if which I'm not as concerned about. With all that said, is there a way to have the system re calibrated and where is that type work normally done? Any experience with that? Cost?

 

https://www.tacomaworld.com/tirecalc?tires=275-55r20-305-55r20

  • Like 1
Posted

Check out the Nitto Exo grappler. I went with KO2s and shortly after I saw the exos installed on another truck and they looked really good, kind of wish I gave the exos a shot. They looked way better on a truck than the pics of them do online or in store.

Plus like you said not everyone else has them

Check out the Toyo R/T's too. They are super quite on the road and extremely effective offroad.

Posted (edited)

Anyone seen the new cooper STT pro? New cooper mud tire. 1db louder than some all terrains which means they're incredibly quiet. Looks like a KM2 design with some conservation in the center tread. Cheap too 233$ for 285/70/17 and 260$ for 295/70/17.

c7147f023c94ebd12eda3a315a199f62.jpg6cbd459859d4f63f8731a44e0a91f057.jpgf0ca1bd8b2b825bc567bf4f3e30116ed.jpg

5c9057fa895d6b18877fcac2c3ca6b65.jpg

Edited by 5RWill
  • Like 1
Posted

Anyone seen the new cooper STT pro? New cooper mud tire. 1db louder than some all terrains which means they're incredibly quiet. Looks like a KM2 design with some conservation in the center tread. Cheap too 233$ for 285/70/17 and 260$ for 295/70/17.

c7147f023c94ebd12eda3a315a199f62.jpg6cbd459859d4f63f8731a44e0a91f057.jpgf0ca1bd8b2b825bc567bf4f3e30116ed.jpg

5c9057fa895d6b18877fcac2c3ca6b65.jpg

Damn. Those look good. Look really aggressive to me and hard to believe they are that quiet. But then again, I said the same thing about my tires. I'm interested in hearing some reviews on them

Posted (edited)

I've only read two reviews. But both were saying great things. One was a YouTube review comparing them to his pro comp mudders the other was just a plain Jane review but both were giving it high praises. Much like the Mickey Thompson mtz it was adequate in all the areas a usual mud tire is lacking but also quiet. They're also a bit heavier than some of the lighter mud tired but still nowhere as bad as nitto or toyo. 295/70/17 is 33.4x12.2x17 and 64lbs.

 

Here is another pic I took before I left the tire store.

e845d7c4a571c253bffb630fbf38fdce.jpg

Edited by 5RWill

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,774
    Total Members
    8,960
    Most Online
    lanaderay
    Newest Member
    lanaderay
    Joined
  • Who's Online   6 Members, 0 Anonymous, 1,194 Guests (See full list)


  • Latest Articles

  • Posts

    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...