Jump to content

Recommended Posts

Posted

Does anyone have a copy of this "Information on Vibration Analysis and Diagnostic 2014/2015 Chevrolet Silverado and GMC Sierra" any link I try does not work. I am currently having a vibration issue with my 2015 Silverado and I am not have the best luck dealing with GM.

  • 2 weeks later...
Posted

Hi I bought a Preowned 2014 GMC Sierra last night I noticed some vibration and decided to look it up online.

I already talked to the dealer and I am bringing the truck for an inspection. Could you please send me a copy of that bulletin the link doesnt work for me.

Thank you

Check and see if it was bought back for vibration issues, as they are legally obligated to disclose this with you before your agreement to purchase.

 

This is a very large problem effecting many, many people!

Ask service dept....to print out service history to view.

 

Good luck

Posted

If the tire actually slips on the rim when inflated to recommended pressure, then you have a major problem. Either the rim is oversized or the tire is undersized, or a combination of both. A properly fitting tire should not slip on the rim unless it is severely underinflated and the driver spins the tires hard on dry pavement).

 

A line drawn across the tire to rim would confirm your suspicions, however that is not the real culprit!

Frame beaming caused by light weight high tensile steel! This allows every imperfection to vibrate throughout the cabin and frame. Oh the body mounts are stiffer in this gen... as well. This keeps your truck from excessive body roll and amplifies the road and engine vibrations as well.

 

Good luck

Posted (edited)

I HAVE A 2015 GMC SLT CREW CAB, 4X4 WITH 6.2L, 8 SPD. I HAD THE SAME VIBRATION IN MY TRUCK. I HAVE 30,000 MILES ON IT, AND HAD THE VIBRATION ON AND OFF FOR THE LAST SIX MONTHS. LAST WEEK I HAD IT SERVICED AT THE DEALER WHERE I BOUGHT IT AND MENTIONED IT TO THE SERVICE MANAGER. THEY HAD ONE LIKE MINE THE MONTH BEFORE AND WHEN THEY FINISHED MY SERVICE THE MANAGER CAME OUT AND TOLD ME MY TRUCK WAS READY AND THAT HE ORDERED THE TORQUE CONVERTER AND OTHER MISC PARTS AND WOULD CALL WHEN IN. I TOOK IT IN TUESDATY 2/21/17 AND THEY CALLED THIS AFTERNOON, TRUCK WAS READY. I PICKED IT UP AND WHERE I WAS ALWAYS HAVING THE VIBRATION, IT WAS GONE. IT IS DRIVING LIKE IT DID WHEN IT WAS NEW, NO VIBRATION. ON MY REPAIR ORDER IT HAD BAD TORQUE CONVERTER BULLETIN #PIP5337.

 

HOPE THIS HELPS

 

I HAVE DELT WITH THIS DEALER FOR THE LAST TEN YEARS AND THEY HAVE NEVER GIVEN ME THE RUN AROUND.

Edited by Docknow9
Posted

I HAVE A 2015 GMC SLT CREW CAB, 4X4 WITH 6.2L, 8 SPD. I HAD THE SAME VIBRATION IN MY TRUCK. I HAVE 30,000 MILES ON IT, AND HAD THE VIBRATION ON AND OFF FOR THE LAST SIX MONTHS. LAST WEEK I HAD IT SERVICED AT THE DEALER WHERE I BOUGHT IT AND MENTIONED IT TO THE SERVICE MANAGER. THEY HAD ONE LIKE MINE THE MONTH BEFORE AND WHEN THEY FINISHED MY SERVICE THE MANAGER CAME OUT AND TOLD ME MY TRUCK WAS READY AND THAT HE ORDERED THE TORQUE CONVERTER AND OTHER MISC PARTS AND WOULD CALL WHEN IN. I TOOK IT IN TUESDATY 2/21/17 AND THEY CALLED THIS AFTERNOON, TRUCK WAS READY. I PICKED IT UP AND WHERE I WAS ALWAYS HAVING THE VIBRATION, IT WAS GONE. IT IS DRIVING LIKE IT DID WHEN IT WAS NEW, NO VIBRATION. ON MY REPAIR ORDER IT HAD BAD TORQUE CONVERTER BULLETIN #PIP5337.

 

HOPE THIS HELPS

 

I HAVE DELT WITH THIS DEALER FOR THE LAST TEN YEARS AND THEY HAVE NEVER GIVEN ME THE RUN AROUND.

Yes you would be correct! Your truck has the eight speed, The new torque converter would actually be a new part number I would think. These are some of the after thought repairs GM is struggling with now. People are complaining about the droaning and vibrations experienced with these new trucks.

Every ones situation is somewhat different, as vibrations are caused by energy release in drivelines or engine related. Balancing of components is so critical now, going forward with light weight high strength frames.

The eight speeds had some issues early on, what speed or vibrations you were experiencing?

 

Take care

  • Like 1
Posted

I have a 2016 Silverado Crew cab 4x4 5.3 LTZ with 45k on it now. I have had it for 17Months(I drive a lot). It started to get a faint vibration about 15k ago and it has gotten progressively worse. I just put in Billstein 5100 shocks all around and a powerstop brake kit and the truck feels smoother than it ever did with zero miles on it. I can't get over the difference, all of my vibration is gone. I was driving today on the highway and looked down and was doing 85 MPH. I never drove that fast as the vibration started about 75. I don't know if this will solve everyones problem but I can't even begin to express the night and day feel of the truck. GM should have built them with these parts!

Posted

I have a 2016 Silverado Crew cab 4x4 5.3 LTZ with 45k on it now. I have had it for 17Months(I drive a lot). It started to get a faint vibration about 15k ago and it has gotten progressively worse. I just put in Billstein 5100 shocks all around and a powerstop brake kit and the truck feels smoother than it ever did with zero miles on it. I can't get over the difference, all of my vibration is gone. I was driving today on the highway and looked down and was doing 85 MPH. I never drove that fast as the vibration started about 75. I don't know if this will solve everyones problem but I can't even begin to express the night and day feel of the truck. GM should have built them with these parts!

Yup Billistein are one of the best shocks for most trucks! I have used the 5100 on my Sierra, as well on my Ram.

They absorb body roll and vibration very well.

Posted

I took the information from Docknow9 to the dealer suggesting the repair would solve the vibration issues with my 2015 Silverado. I had taken the truck to this dealer for evaluation and while a problem was identified I thought we we waiting for a repair procedure from GM. This was backed up by a conversation with GM customer care who informed me that the engineers are working on a solution and asked that I be patient. When I brought this information to the dealer they informed that it only applied to the 8 speed transmission not the 6 speed. The mood on helping me had changed as well. They quoted the last service report on the truck and now claim the vibration in the truck is normal. This was all now identified in a new sevice report that now contained "tech notes". These notes claim the tech drove another truck and verified that the vibration was present in that truck as well. The service advisor spent 1/2 an hour trying to reproduce the vibration in a new 2017 with no success. He requested that he and the service manager test drive my truck again. The service advisor drove the truck with me in it and identified a vibration in the 40 mph range (60 to 70 kph). He claims this is normal despite the fact that this vibration did not show up until 35000 kilometers and one year of service. The service manager declined to drive the truck. I had a civil conversation with the service manager questioning the two different service reports and the GM customer care department advising me that they are working on a solution. No explanation to the updated service report and basicly told me that "the engineers are working on the problem" is the same as "the check is in the mail". I feel the customer group could be saying anything to get me to stop pursuing the mater. Despite two dealers identifying this annoying vibration I still have no agreement that it is not normal and needs to be corrected. It gets worse every time I drive it especially when the truck is cold, vibrating so bad it shakes the steering wheel. I feel like GM is hoping I will get tired of the battle and just give up and live with the problem. That's not happening. This issue drives me crazy everytime I drive the the truck. A local transmission shop thinks it could be the torque convertor and has a process for confirming it. I will keep the forum updated. Special note - the service manager asked me to let him know if the transmission shop confirms that there is a torque converor issue but even with this information he still will not commit to repairing the truck.

Posted

I took the information from Docknow9 to the dealer suggesting the repair would solve the vibration issues with my 2015 Silverado. I had taken the truck to this dealer for evaluation and while a problem was identified I thought we we waiting for a repair procedure from GM. This was backed up by a conversation with GM customer care who informed me that the engineers are working on a solution and asked that I be patient. When I brought this information to the dealer they informed that it only applied to the 8 speed transmission not the 6 speed. The mood on helping me had changed as well. They quoted the last service report on the truck and now claim the vibration in the truck is normal. This was all now identified in a new sevice report that now contained "tech notes". These notes claim the tech drove another truck and verified that the vibration was present in that truck as well. The service advisor spent 1/2 an hour trying to reproduce the vibration in a new 2017 with no success. He requested that he and the service manager test drive my truck again. The service advisor drove the truck with me in it and identified a vibration in the 40 mph range (60 to 70 kph). He claims this is normal despite the fact that this vibration did not show up until 35000 kilometers and one year of service. The service manager declined to drive the truck. I had a civil conversation with the service manager questioning the two different service reports and the GM customer care department advising me that they are working on a solution. No explanation to the updated service report and basicly told me that "the engineers are working on the problem" is the same as "the check is in the mail". I feel the customer group could be saying anything to get me to stop pursuing the mater. Despite two dealers identifying this annoying vibration I still have no agreement that it is not normal and needs to be corrected. It gets worse every time I drive it especially when the truck is cold, vibrating so bad it shakes the steering wheel. I feel like GM is hoping I will get tired of the battle and just give up and live with the problem. That's not happening. This issue drives me crazy everytime I drive the the truck. A local transmission shop thinks it could be the torque convertor and has a process for confirming it. I will keep the forum updated. Special note - the service manager asked me to let him know if the transmission shop confirms that there is a torque converor issue but even with this information he still will not commit to repairing the truck.

Seek a lawyer, also look at the CAMVAP site for info.

This is not normal for a truck to shake, get videos of this happening.

 

Thxs

  • 2 weeks later...
Posted

A line drawn across the tire to rim would confirm your suspicions, however that is not the real culprit!

Frame beaming caused by light weight high tensile steel! This allows every imperfection to vibrate throughout the cabin and frame. Oh the body mounts are stiffer in this gen... as well. This keeps your truck from excessive body roll and amplifies the road and engine vibrations as well.

Good luck

I consider this a plausible theory.
Posted

I took the information from Docknow9 to the dealer suggesting the repair would solve the vibration issues with my 2015 Silverado. I had taken the truck to this dealer for evaluation and while a problem was identified I thought we we waiting for a repair procedure from GM. This was backed up by a conversation with GM customer care who informed me that the engineers are working on a solution and asked that I be patient. When I brought this information to the dealer they informed that it only applied to the 8 speed transmission not the 6 speed. The mood on helping me had changed as well. They quoted the last service report on the truck and now claim the vibration in the truck is normal. This was all now identified in a new sevice report that now contained "tech notes". These notes claim the tech drove another truck and verified that the vibration was present in that truck as well. The service advisor spent 1/2 an hour trying to reproduce the vibration in a new 2017 with no success. He requested that he and the service manager test drive my truck again. The service advisor drove the truck with me in it and identified a vibration in the 40 mph range (60 to 70 kph). He claims this is normal despite the fact that this vibration did not show up until 35000 kilometers and one year of service. The service manager declined to drive the truck. I had a civil conversation with the service manager questioning the two different service reports and the GM customer care department advising me that they are working on a solution. No explanation to the updated service report and basicly told me that "the engineers are working on the problem" is the same as "the check is in the mail". I feel the customer group could be saying anything to get me to stop pursuing the mater. Despite two dealers identifying this annoying vibration I still have no agreement that it is not normal and needs to be corrected. It gets worse every time I drive it especially when the truck is cold, vibrating so bad it shakes the steering wheel. I feel like GM is hoping I will get tired of the battle and just give up and live with the problem. That's not happening. This issue drives me crazy everytime I drive the the truck. A local transmission shop thinks it could be the torque convertor and has a process for confirming it. I will keep the forum updated. Special note - the service manager asked me to let him know if the transmission shop confirms that there is a torque converor issue but even with this information he still will not commit to repairing the truck.

 

Any word on the transmission shop confirming the torque converter?

Posted (edited)

Edit - nevermind. This link works for me.

 

I'm possibly picking up a 2016 Sierra 1500 on Saturday, so this concerns me. Does anyone have a copy of the data provided in the first post of this thread? None of the links are working.

Edited by IndySierra
Posted

Prior to my last post I had visited my dealer suggesting that my 2015 had a transmission issue based on information I had received onn this forum. They quickly dismissed my therory and I felt I had reached the end on my rope. As suggested by a local transmission shop I added a transmission anti shuddering additive. This was done with the permision of the GM dealer I was dealing with. Feeling there was no hope in getting my truck fixed I began shopping for a new truck. I had a truck selected and then I contacted GM customer service hoping for some finacial assistance to replace the truck that "could not be fixed". To my suprise this representative was very helpful. She took all my information and then said she would call back in a few days. In a few days she called back and asked me to return to the dealer for a attempt to repair the truck. They had the truck for one day and too my suprise the truck appears to be fixed. It may not be perfect but it is more than 95% better and to this point I am satisfied and will no longer be looking to replace my truck.

 

The issue with the truck was a vibration in the exhaust system. The repair was to replace the exhaust from the cat convertor back. There appears to be a back pressure device in the system. In the new system this device has been moved from downstrem of the muffler to in front of the muffler. This has solved my complaint.

Posted

Prior to my last post I had visited my dealer suggesting that my 2015 had a transmission issue based on information I had received onn this forum. They quickly dismissed my therory and I felt I had reached the end on my rope. As suggested by a local transmission shop I added a transmission anti shuddering additive. This was done with the permision of the GM dealer I was dealing with. Feeling there was no hope in getting my truck fixed I began shopping for a new truck. I had a truck selected and then I contacted GM customer service hoping for some finacial assistance to replace the truck that "could not be fixed". To my suprise this representative was very helpful. She took all my information and then said she would call back in a few days. In a few days she called back and asked me to return to the dealer for a attempt to repair the truck. They had the truck for one day and too my suprise the truck appears to be fixed. It may not be perfect but it is more than 95% better and to this point I am satisfied and will no longer be looking to replace my truck.

 

The issue with the truck was a vibration in the exhaust system. The repair was to replace the exhaust from the cat convertor back. There appears to be a back pressure device in the system. In the new system this device has been moved from downstrem of the muffler to in front of the muffler. This has solved my complaint.

This is very good news for you, can you help explain what you were experiencing in this vibration feeling.

Just wondering what speed, and was it felt in the cabin, and or steering wheel as well.

 

Thxs

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Congratulations Isttype, on your gmc. Really like my 2024 2500hd sle doublecab now with 85,500 miles.  I checked the oil today at 4800 miles since last oil change and barely reading on the stick.  I don't care if GM says it's Acceptable adding a quart every 2000 miles because that is 100% BS, It is not a 1966 Harley Shovelhead! Sounds like it's setting up a future failure like I had with my 1500 6.2l. Other than oil consumption problems, I really like the 6.6l gas and 10 speed is really nice.  Towed a light 4000 pound trailer last week and averaged 14 mpg.  I was pretty impressive that a 7300 pound gas truck did 14mpg towing, Later-
    • Long Term Cold Cycle Limited Testing   Back to the 1990's and XOM's million mile test. Since then there have been others and there will be more. Schaeffer's, AMSOIL to name two. Of these Schaeffer's is the stand alone which I will explain in a bit later.    http://papers.sae.org/600190/:   http://papers.sae.org/850215/:   Up to 75% of  engine wear occurs on cold starts. These two links (above) provide the technical reasons for engine wear. In a nut shell, and by a large margin, cylinder wear is what takes out most motors and even with a pre-oiling system that part of the engine is dry enough on cold starts and cold warm up to pierce Stribeck.   So when you put a motor, or a car, on a dyno for a million miles stopping only for oil changes, (yes fuel is uninterrupted) or break down maintenance, you are depriving the test of the most important part of it's wear cycle. Yes a million is then a pretty easy walk even for a mineral oil under those conditions.    How about cleanliness during the long test cycles? Same thing. Varnishes that stick rings and insulate parts are laid down by repetitive 'heat cycles'. It's the cool down the precipitates the varnishes. These long runs also hinder acidic attack caused by cold start richness and less than optimal cold start ring sealing. They hinder water formation and enhance breathing of the crankcase; the petri dish of acid formation, the first step in sludge formation, amalgamation and precipitation. These motors are also monitored and controlled for water and oil temperatures to within the "normal operating range".      https://www.swri.org/sites/default/files/sequence-iiih-test.pdf Note the test sequence in some boutique oils literature for testing, API IIIH, is not the standard used for the ILSAC G7 testing. Does that mean it is irrelevant? No, not as used. As used as a 'visual guide' it makes it's point. The G7 weighted piston deposit minimum is lower.      Back to Schaeffer's. That was a cyclical test of an engine in fleet service and not a dyno mule and if you saw the video it was not mirror clean but wear was low.    There are oils like BioSyn and other 'Renewable" source oils that taught cleanliness and have proven themselves in fleet testing. Havoline an other example.    The newest ILSAC G-7 test prioritize cleanliness, LSPI mitigation and fuel economy OVER WEAR. In comparison Porsche C30 Specification Verses ILSAC G-7 Specification below:      Some will balk that this graph isn't apples to apples and I will challenge that in that this graph represent the SPECIFICATION and not the any One Oil Performance.   It is absolutely possible to minimize wear, maximize cleanliness and mitigate LSPI etc., It just isn't cheap and currently I see none that are not walking toward profit over performance.     
    • I don't think you will need a split, separate product, etc., the OBD port should be able to deliver everything you need. Since your device would be plugged into it all the time, it wouldn't miss anything.    Hardware in this case will be the easiest part of your project - ELM 327 devices will already deliver all the data you need. Reporting/software is where your advantage/marketability is.
    • I do too. I’ll never be stuck again 😂
    • It has happened to me a few times. I carry a jumpstart-tire inflator with me.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...