ReadyLift - 2.25'' FRONT LEVELING KIT W/ CONTROL ARMS

[Deuce_Mod]

I realize this is an older thread but it helped me out so paying it forward.

2017 Silverado Z71 w/6.5' Bed-  Readylift 2.25" Front Kit with Upper Control Arms and replaced back 1.25" Blocks with Readylift 2.25" Blocks.  Sitting on P285/55R20 Toyo AT III.  

It does rub at full lock on the front edge of the UCA, but just barely.  

Here is After Pic and I will post the Pic of where it rubs separately.

[Deuce_Mod]

Just now, Deuce_Mod said:

I realize this is an older thread but it helped me out so paying it forward.

2017 Silverado Z71 w/6.5' Bed-  Readylift 2.25" Front Kit with Upper Control Arms and replaced back 1.25" Blocks with Readylift 2.25" Blocks.  Sitting on P285/55R20 Toyo AT III.  

It does rub at full lock on the front edge of the UCA, but just barely.  

Here is After Pic and I will post the Pic of where it rubs separately.

 

[Deuce_Mod]

8 minutes ago, Deuce_Mod said:

 

Here is the Before Pic

[Vasa1]

On 8/20/2020 at 7:08 AM, Vasa1 said:

19 dblcab limited. The Readylift 2.25, stock rear and 275/65-20 KO2’s. No issues or rubbing.

Update. After installing this kit ànd running it for approximately 4 k, I have noticed it started rubbing at full lock in reverse. Also with the e rated tires, the ride was absolutely terrible. Felt every bump. I just recently sold the KO2’s and bought 275/60-20 Duratracs in a p rated. What a difference in the ride but with the leveling kit it still feels like it bottoms out on some bumps. I figured going to a smaller tire would eliminate the rubbing, not so. Felt it rubbing last nite while parking. Left the wheel in full lock to the left and got out to have a look. It’s the stock factory rim rubbing the a arm, left a small gouge. What the hell? Should have left it stock.

[SoonerTA]

On 11/3/2020 at 5:49 PM, Deuce_Mod said:

I realize this is an older thread but it helped me out so paying it forward.

2017 Silverado Z71 w/6.5' Bed-  Readylift 2.25" Front Kit with Upper Control Arms and replaced back 1.25" Blocks with Readylift 2.25" Blocks.  Sitting on P285/55R20 Toyo AT III.  

It does rub at full lock on the front edge of the UCA, but just barely.  

Here is After Pic and I will post the Pic of where it rubs separately.

@Deuce_Mod Are you still liking your ReadyLift kit?  Did you replace your shocks?  How is the ride after a couple months?

[Deuce_Mod]

On 1/18/2021 at 4:00 PM, SoonerTA said:

@Deuce_Mod Are you still liking your ReadyLift kit?  Did you replace your shocks?  How is the ride after a couple months?

@SoonerTA.  Sorry for the way late response.  No I did not replace the shocks.  only has 38K miles at the time so didnt need them at the time.  Still love the ride.  It really helps that my tires are "P" rated.