Jump to content

Back Wall Amp Rack

ChristianR

Recommended Posts

ChristianR Enthusiast

ChristianR

Posted
Posted

So I am soon to do a big install in my 15 Sierra double cab and I plan to mount my two amps, Lc7i, and the power and ground distribution to the back wall. I don't want to zip screws through the wall and I'm in need of a method to attach either a 1/2" piece of MDF or a piece of 1/2" PVC foam board. Which should I use and how to mount it to the rear wall? 

Thank you

ChristianR Enthusiast

ChristianR

Posted
  • Author
Posted
13 minutes ago, BT3 said:

I used the factory bolts to put a 1/2 inch sheet of plywood on the wall

 

works great

 

link to my build log

 

https://www.diymobileaudio.com/forum/build-logs-project-install-gallery/362722-2017-silverado-build-log-4.html

Do you know how to get rid of or at least how to quiet down the chimes bc they are loudd stock and with my 4 channel on my highs I can only imagine how earpiercingly painful it'd be

lapoolboy Senior Enthusiast

lapoolboy

Posted
Posted
1 hour ago, ChristianR said:

Do you know how to get rid of or at least how to quiet down the chimes bc they are loudd stock and with my 4 channel on my highs I can only imagine how earpiercingly painful it'd be

Huh?

ChristianR Enthusiast

ChristianR

Posted
  • Author
Posted
Just now, lapoolboy said:

Huh?

The door chimes are loud and will be louder when an amp is installed

ChristianR Enthusiast

ChristianR

Posted
  • Author
Posted
3 minutes ago, lapoolboy said:

Ok.  I follow now.  I was unaware the key chime was produced by the radio speakers.

Yes it is the front left dash and door speaker

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • cherryred21duramax
      Tonneau cover that does not leak water

      By cherryred21duramax · Posted

      Thank you.  I really appreciate the well wishes.  I'm an engineer in the telecom industry, I know hardly anything about marketing.  Over the years I did some videos for nonprofits and web sites for small businesses and the seed was planted.  Agree with over-buying, I started shooting on an iPhone before I got my first DSLR and tripod.   I'm looking at trucks with potentially 150,000+ miles to keep the cost of entry low while focusing on the client experience and equipment.  Good wireless mics for interviews, the right lenses & lighting to look professional.  But I don't want to be late or break down, the stress of emptying a trailer & securing a rental truck right before a gig would negate any savings from buying a junker.  So anything that leaks water, has extensive rust, or generally unreliable I'd like to avoid.   Does GM/Chevy overbuild these trucks for upfitting?  I talked to a local upfitter, they sometimes tie lights & other 12V into existing circuits, which I always thought was bad.  Which is why I enjoyed the AUX upfit switches on previous trucks (odd they mostly come with off-road or work truck packages).
    • silveradosid
      injector cleaner 2021 2.7 1500 silverado

      By silveradosid · Posted

      i guess it might be depending on the type of driving. my 2.7 has 120k miles, changed the plugs at 70k and it runs as good as new. i have not used any injector cleaner
    • Atlas
      Looking at ordering a '26 WT because I want a std cab, std bed

      By Atlas · Posted

      GM's are stainless and have a fairly robust powder coating, although, still not worth $850 in my opinion. They will hold up a lot better than their cheaper steel aftermarket counterparts.   What I like about the GM step bars is dealers will often equip their dealer stock with them. Lots of margin. Which means a lot of people end up buying them because they're already on the truck, even if they don't like them. So it's pretty easy to find brand new takeoffs with hardware on Marketplace and Craigslist for about $250.   That's what I did for my crew cab. I wanted ZR2 rock rails for the look, but with the ability to bolt up GM's assist step package. From GM it's about a $2500 accessory all in. The old folks in my life can't get in the truck without steps. I found the whole package on marketplace for $180.
    • kr477
      Forward collision and lane keep assist still a problem on 2022 refresh?

      By kr477 · Posted

      I am really glad I found this post and this site... We have a 2022 1500 refresh LTZ that has these problems: - forward collision avoidance warning light - lane keep assist unavailable - adaptive cruise control unavailable   The truck was bought as a new leftover in 2023, so it was still under the 3/36 B to B when it went in for these problems earlier this year. It has been at the dealer on and off now for about 110 days now. These are some of the things they have done that I can read on the service tickets. - replace/add ground straps (4) - check all battery cables and vlts - replace serial data gateway module - replace front view camera - numerous reprogramming - a few calibrations (apparently ending with 'learned') Last week when I had it back the truck had those 3 warnings every time we used it except for 3 times. On three separate occasions the truck started and ran perfectly with no (zero) warning messages or warning lights lit - everything worked perfectly. Over that same time period the truck did not work on every other 'key' cycle which I would estimate at 60+ cycles. On those estimated 57 cycles it had the same 3 problems each and every time.   It is back at the dealer now - can anyone help at all with what the true problem might be?  Or possibly what can be ruled out leaving a lower number of possibilities? Thank you very much for any help you may be able to supply....     
    • Z45
      Looking at ordering a '26 WT because I want a std cab, std bed

      By Z45 · Posted

      As for the step bars, friend did just that, bought some cheap ones and we are in Michigan and they turned to rust in less than a year.  In 3 yrs he had to replace one of them because they rusted out from the inside even though he kept after them cleaning and polishing etc. Had to drive 300 miles (to Chicago area) to find a reg cab wt, he ordered one and dealer never got it and with winter approaching (plow truck) he needed fo find one ASAP.  Furd dealer found him one but he choose to drive to get a GMC.    Just what you can expect with cheap stuff, LOW quality. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...