2014+ Suspension Lifts

StormTrooperSilverado · March 31, 2020

On 2/4/2014 at 7:14 AM, zboymccurley said:

Ive had a rough country 3.5 on mine for almost 5000 miles and no problems

I have the 3.5 knuckle lift on mine and still have a noticeable rake on the truck...does your truck have rear rake on it?

NorEaster · April 4, 2020

Looking at getting the 4.5" zone lift. Going to run 34 or 35's. I was curious if anyone has any pictures or experience. Have done my fair share of research and read I will also need spacers on the rear.

15KSChevy · April 5, 2020

12 minutes ago, NorEaster said:

Looking at getting the 4.5" zone lift. Going to run 34 or 35's. I was curious if anyone has any pictures or experience. Have done my fair share of research and read I will also need spacers on the rear.

I have a zone 4.5 with 33s. Me and my brother installed it over a weekend. Have no issues so far rides nearly the same as stock maybe a tad stiffer. I have bora 2 inch spacers in rear looks identical to front looking down front of truck. Wheels are 18x9 -12 offset

Edited April 5, 2020 by 15KSChevy
Missing info

Aboogie808 · April 5, 2020

Looking at getting the 4.5" zone lift. Going to run 34 or 35's. I was curious if anyone has any pictures or experience. Have done my fair share of research and read I will also need spacers on the rear.

4.5 is cutting it, if you want to run 20s. I have the 6.5 zone and installed it myself. I am running 35x12.50x 20 toyo MTs with 0 offset. I added bds leaf to my rear end and Fox full coilovers with reservoirs and a 2” spacers to bump me up more. Upgraded my UCA to Cognito. Before fox, I ran Bilstein and loved them.

NorEaster · April 5, 2020

3 hours ago, 15KSChevy said:

I have a zone 4.5 with 33s. Me and my brother installed it over a weekend. Have no issues so far rides nearly the same as stock maybe a tad stiffer. I have bora 2 inch spacers in rear looks identical to front looking down front of truck. Wheels are 18x9 -12 offset

Awesome looking ride! So you run spacers on just the back? How have they been? You have any additional pics?

3 hours ago, Aboogie808 said:

4.5 is cutting it, if you want to run 20s. I have the 6.5 zone and installed it myself. I am running 35x12.50x 20 toyo MTs with 0 offset. I added bds leaf to my rear end and Fox full coilovers with reservoirs and a 2” spacers to bump me up more. Upgraded my UCA to Cognito. Before fox, I ran Bilstein and loved them.

Yeah I have 20 inch AllTerrain rims. I've seen two guys running the 4.5" Zone with 35's but they never said if they had rear spacers or not. Sweet ride man!

CovetedStyle · April 6, 2020

On 4/4/2020 at 8:37 PM, NorEaster said:

Awesome looking ride! So you run spacers on just the back? How have they been? You have any additional pics?

Yeah I have 20 inch AllTerrain rims. I've seen two guys running the 4.5" Zone with 35's but they never said if they had rear spacers or not. Sweet ride man!

If you don’t mind cutting a chunk out of the steel part of your bumper and hammering in the lower part of the rear of your front fenders you can definitely put 35’s on a 4.5 knuckle lift.. on a stock rim was zero offset you’re gonna have a little bit better chance with the turning radius but still it’s gonna take some alterations.

Edited April 6, 2020 by CovetedStyle

NorEaster · April 7, 2020

On 8/14/2019 at 8:47 PM, 15KSChevy said:

Good looking truck!

Edited April 8, 2020 by NorEaster

NorEaster · April 8, 2020

On 8/14/2019 at 8:01 AM, nathanj485 said:

Not a big fan of stuffing the wheel wells. Seems counterintuitive to having a lift kit, especially if you plan on off roading where clearance is important. You don’t want to be scraping the bottom of your truck on tree branches and rocks and the more clearance you have, the deeper water you can tread without worrying about flooding your exhaust. I run a 6inch BDS with Fox 2.0s. 20x10 Fuels. 35x12.50 Nitto Ridge.

Sweet looking ride man! Whats your setup?

nathanj485 · April 8, 2020

37 minutes ago, NorEaster said:

Sweet looking ride man! Whats your setup?

6 inch BDS. 20x10 Fuel Sledge. 35x12.5 Nitto Ridge Grappler. And thanks

NorEaster · April 10, 2020

Anyone here with a 5.3 running 35s without regearing?

NorEaster · April 10, 2020

Anyone here running 35s in a 5.3 without regearing?

Hutch72 · April 10, 2020

3 hours ago, NorEaster said:

Anyone here running 35s in a 5.3 without regearing?

I’m , running 35” tires with 3:42 gears and a 6” lift.

m3n00b · April 10, 2020

Anyone here with a 5.3 running 35s without regearing?

I'm on stock gears in my 6.2. the 8 speed seems to make up for it.

dieselfan1 · April 10, 2020

5 hours ago, NorEaster said:

Anyone here with a 5.3 running 35s without regearing?

I'm running 37's on a 9" McGaughys with my 5.3 3.42's

It's not as bad as everyone makes it sound. It gets down the road just fine.

Half of those guys are running stock trucks so they really are just going by what they heard.

Sure it could use some 4.10-4.56 gears but I'm not racing anyone so I really don't care.

Edited April 10, 2020 by dieselfan1

big papa · April 10, 2020

On 4/4/2020 at 4:50 PM, NorEaster said:

Looking at getting the 4.5" zone lift. Going to run 34 or 35's. I was curious if anyone has any pictures or experience. Have done my fair share of research and read I will also need spacers on the rear.

Love my Zone...